linux.git/arch/powerpc/platforms/8xx, branch vsnprintf

Revert "powerpc/8xx: Always pin kernel text TLB"

2024-08-30T11:29:52+00:00

This reverts commit bccc58986a2f98e3af349c85c5f49aac7fb19ef2.

When STRICT_KERNEL_RWX is selected, EXEC memory must stop where
RW memory start. When pinning iTLBs it means an 8M alignment for
RW data start. That may be acceptable on boards with a lot of
memory but one of my supported boards only has 32 Mbytes and this
forced alignment leads to a waste of almost 4 Mbytes with is more
than 10% of the total memory.

So revert commit bccc58986a2f ("powerpc/8xx: Always pin kernel text
TLB") but don't restore previous behaviour in ITLB miss handler
as now kernel PGD entries are copied into each process PGDIR.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/01b6780b860c8043b51a1ba9d83acfc6f2dde910.1724173828.git.christophe.leroy@csgroup.eu

powerpc: Untangle fixmap.h and pgtable.h and mmu.h

2023-10-19T06:12:44+00:00

fixmap.h need pgtable.h for [un]map_kernel_page()

pgtable.h need fixmap.h for FIXADDR_TOP.

Untangle the two files by moving FIXADDR_TOP into pgtable.h

Also move VIRT_IMMR_BASE to fixmap.h to avoid fixmap.h in mmu.h

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/5eba12392a018be28ad0a02ed844767b132589e7.1695659959.git.christophe.leroy@csgroup.eu

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2023-08-31T19:43:10+00:00

Pull powerpc updates from Michael Ellerman:

 - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
   configured SMT state when hotplugging CPUs into the system

 - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
   Radix MMU to avoid a broadcast TLBIE flush on exit

 - Drop the exclusion between ptrace/perf watchpoints, and drop the now
   unused associated arch hooks

 - Add support for the "nohlt" command line option to disable CPU idle

 - Add support for -fpatchable-function-entry for ftrace, with GCC >=
   13.1

 - Rework memory block size determination, and support 256MB size on
   systems with GPUs that have hotpluggable memory

 - Various other small features and fixes

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.

* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
  macintosh/ams: linux/platform_device.h is needed
  powerpc/xmon: Reapply "Relax frame size for clang"
  powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
  powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
  powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
  powerpc/mpc5xxx: Add missing fwnode_handle_put()
  powerpc/config: Disable SLAB_DEBUG_ON in skiroot
  powerpc/pseries: Remove unused hcall tracing instruction
  powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
  powerpc: dts: add missing space before {
  powerpc/eeh: Use pci_dev_id() to simplify the code
  powerpc/64s: Move CPU -mtune options into Kconfig
  powerpc/powermac: Fix unused function warning
  powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
  powerpc: Don't include lppaca.h in paca.h
  powerpc/pseries: Move hcall_vphn() prototype into vphn.h
  powerpc/pseries: Move VPHN constants into vphn.h
  cxl: Drop unused detach_spa()
  powerpc: Drop zalloc_maybe_bootmem()
  powerpc/powernv: Use struct opal_prd_msg in more places
  ...

powerpc/8xx: Remove init_internal_rtc() to fix no previous prototype error

2023-08-18T07:03:14+00:00

A W=1 build of mpc885_ads_defconfig throws the following error:

  CC      arch/powerpc/platforms/8xx/m8xx_setup.o
arch/powerpc/platforms/8xx/m8xx_setup.c:41:1: error: no previous prototype for 'init_internal_rtc' [-Werror=missing-prototypes]
   41 | init_internal_rtc(void)
      | ^~~~~~~~~~~~~~~~~

init_internal_rtc() was introduced by commit df34403dcaac ("[POWERPC]
8xx: Add mpc885ads support and common mpc8xx files") as a weak
function but has never been defined and/or used outside m8xx_setup.c

As it is called only once there, just fold it into its caller and
remove it.

Signed-off-by: Christophe Leroy 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/0aa1141e18a84d926e199093204b37ec993f0c87.1692275185.git.christophe.leroy@csgroup.eu

powerpc/8xx: Remove immr_map() and immr_unmap()

2023-08-16T13:54:47+00:00

Since commit fb533d0c5a97 ("[POWERPC] 8xx: Infrastructure code cleanup.")
immr_map() is just returning mpc8xxx_immr pointer and immr_unmap()
do nothing.

We already have parts of code that use mpc8xxx_immr directly so get rid
of immr_map() and immr_unmap() by using mpc8xxx_immr directly. And avoid
going through local pointers that hide the pointed structure.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/633ed46f6015ff44d5599258647ea517f75d6a1d.1691474658.git.christophe.leroy@csgroup.eu

powerpc/include: Declare mpc8xx_immr in 8xx_immap.h

2023-08-16T13:54:47+00:00

Do the same as for cmp2_immr : declare it at the same place
as its type immap_t, that is in 8xx_immap.h instead of fs_pd.h

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/62d490b65899c2f2667ca7045c5f0fad9cbda458.1691474658.git.christophe.leroy@csgroup.eu

powerpc/include: Remove unneeded #include

2023-08-16T13:54:47+00:00

tqm8xx_setup.c and fs_enet.h don't use any items provided by fs_pd.h

Remove unneeded #include 

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/b056c4e986a4a7707fc1994304c34f7bd15d6871.1691474658.git.christophe.leroy@csgroup.eu

net: fs_enet: Don't include fs_enet_pd.h when not needed

2023-08-08T22:01:30+00:00

Three platforms in arch/powerpc/platforms/8xx/ include fs_enet_pd.h
but don't use anything from it.

Remove the includes.

Signed-off-by: Christophe Leroy 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/de62ad1261a801c4a8ae4238bd4842ff278d2ddf.1691155347.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski

serial: cpm_uart: Don't include fs_uart_pd.h when not needed

2023-08-04T13:08:55+00:00

Remove inclusion of fs_uart_pd.h from all files not using
anything from that file.

Signed-off-by: Christophe Leroy 
Link: https://lore.kernel.org/r/c7996ef4de56e7ee42a434e37d214cba337a146c.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman