linux.git/arch/powerpc/perf, branch v4.20 Linux kernel source tree powerpc/8xx: Use patch_site for perf counters setup 2018-10-26T10:58:58+00:00 Christophe Leroy christophe.leroy@c-s.fr 2018-10-19T06:55:08+00:00 709cf19c5749308603ffa12557d8bd152a926783 The 8xx TLB miss routines are patched when (de)activating perf counters. This patch uses the new patch_site functionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d' Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
The 8xx TLB miss routines are patched when (de)activating
perf counters.

This patch uses the new patch_site functionality in order
to get a better code readability and avoid a label mess when
dumping the code with 'objdump -d'

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Add -Werror at arch/powerpc level 2018-10-18T13:56:17+00:00 Michael Ellerman mpe@ellerman.id.au 2018-10-10T05:13:06+00:00 23ad1a2700725d46ee7760920974c68be81ab82d Back when I added -Werror in commit ba55bd74360e ("powerpc: Add configurable -Werror for arch/powerpc") I did it by adding it to most of the arch Makefiles. At the time we excluded math-emu, because apparently it didn't build cleanly. But that seems to have been fixed somewhere in the interim. So move the -Werror addition to the top-level of the arch, this saves us from repeating it in every Makefile and means we won't forget to add it to any new sub-dirs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Back when I added -Werror in commit ba55bd74360e ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.

At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.

So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/perf: Quiet IMC PMU registration message 2018-10-13T11:21:25+00:00 Joel Stanley joel@jms.id.au 2018-10-09T06:20:38+00:00 6233b6da0c00a9768bdab1c502115b960929889a On a Power9 box we get a few screens full of these on boot. Drop them to pr_debug. [ 5.993645] nest_centaur6_imc performance monitor hardware support registered [ 5.993728] nest_centaur7_imc performance monitor hardware support registered [ 5.996510] core_imc performance monitor hardware support registered [ 5.996569] nest_mba0_imc performance monitor hardware support registered [ 5.996631] nest_mba1_imc performance monitor hardware support registered [ 5.996685] nest_mba2_imc performance monitor hardware support registered Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by: Stewart Smith <stewart@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
On a Power9 box we get a few screens full of these on boot. Drop
them to pr_debug.

  [    5.993645] nest_centaur6_imc performance monitor hardware support registered
  [    5.993728] nest_centaur7_imc performance monitor hardware support registered
  [    5.996510] core_imc performance monitor hardware support registered
  [    5.996569] nest_mba0_imc performance monitor hardware support registered
  [    5.996631] nest_mba1_imc performance monitor hardware support registered
  [    5.996685] nest_mba2_imc performance monitor hardware support registered

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/perf: Add missing break in power7_marked_instr_event() 2018-10-03T05:39:45+00:00 Michael Ellerman mpe@ellerman.id.au 2018-09-20T09:41:11+00:00 db6711b7a17f03921e734e11e3a1e9bccb28bf46 In power7_marked_instr_event() there is a switch case that is missing a break or an explicit fallthrough, it's not immediately clear which it should be. The function determines based on the PMU event code, whether the event is a "marked" event (which then requires us to configure the PMU in a certain way). On Power7 there is no specific bit(s) in the event to tell us that, we just have to know. Rather than having a full list of every event and whether they are marked, we pull apart the event code and for events with certain values of certain fields we can say that those are all marked events. We take the psel (bits 0-7) of the event, and look at bits 4-7. For a value of 6 we say that if the entire psel == 0x64 then if the pmc == 3 the event is marked, else not, and otherwise we continue. It is then that we fallthrough to the 8 case, where we return true if the unit == 0xd. The question is should the 6 case also fallthrough and check for unit == 0xd, or should it return. Looking at the full list of events we see that there are zero events where (psel >> 4) == 0x6 and unit == 0xd. So the answer is it doesn't really matter, there are no valid event codes that will return a different result whether we fallthrough or break. But equally, testing the 6 case events against unit == 0xd is slightly bogus, as there are no such events. So to make the code clearer, and avoid any future confusion, have the 6 case break rather than falling through. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> 
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.

The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.

Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.

We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.

It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.

The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.

Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.

So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.

But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2018-08-17T18:32:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-17T18:32:50+00:00 5e2d059b52e397d9ac42f4c4d9d9a841887b5818 Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ... 
Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A fix for a bug in our page table fragment allocator, where a page
     table page could be freed and reallocated for something else while
     still in use, leading to memory corruption etc. The fix reuses
     pt_mm in struct page (x86 only) for a powerpc only refcount.

   - Fixes to our pkey support. Several are user-visible changes, but
     bring us in to line with x86 behaviour and/or fix outright bugs.
     Thanks to Florian Weimer for reporting many of these.

   - A series to improve the hvc driver & related OPAL console code,
     which have been seen to cause hardlockups at times. The hvc driver
     changes in particular have been in linux-next for ~month.

   - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.

   - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
     use anywhere other than as a paper weight.

   - An optimised memcmp implementation using Power7-or-later VMX
     instructions

   - Support for barrier_nospec on some NXP CPUs.

   - Support for flushing the count cache on context switch on some IBM
     CPUs (controlled by firmware), as a Spectre v2 mitigation.

   - A series to enhance the information we print on unhandled signals
     to bring it into line with other arches, including showing the
     offending VMA and dumping the instructions around the fault.

  Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
  Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
  Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
  Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
  Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
  Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
  Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
  Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
  Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
  Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
  Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
  Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
  Rao, zhong jiang"

* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
  powerpc/mm/book3s/radix: Add mapping statistics
  powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
  powerpc/mm/hash: Remove unnecessary do { } while(0) loop
  powerpc/64s: move machine check SLB flushing to mm/slb.c
  powerpc/powernv/idle: Fix build error
  powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
  powerpc/mm: remove warning about ‘type’ being set
  powerpc/32: Include setup.h header file to fix warnings
  powerpc: Move `path` variable inside DEBUG_PROM
  powerpc/powermac: Make some functions static
  powerpc/powermac: Remove variable x that's never read
  cxl: remove a dead branch
  powerpc/powermac: Add missing include of header pmac.h
  powerpc/kexec: Use common error handling code in setup_new_fdt()
  powerpc/xmon: Add address lookup for percpu symbols
  powerpc/mm: remove huge_pte_offset_and_shift() prototype
  powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
  powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
  powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
  powerpc/fadump: handle crash memory ranges array index overflow
  ...
powerpc/perf: Remove sched_task function defined for thread-imc 2018-08-07T14:32:32+00:00 Anju T Sudhakar anju@linux.vnet.ibm.com 2018-05-18T07:35:25+00:00 7ccc4fe5ff9e3a134e863beed0dba18a5e511659 Call trace observed while running perf-fuzzer: CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted 4.13.0-32-generic #35~lp1746225 task: c000003f776ac900 task.stack: c000003f77728000 NIP: c000000000299b70 LR: c0000000002a4534 CTR: c00000000029bb80 REGS: c000003f7772b760 TRAP: 0700 Not tainted (4.13.0-32-generic) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24008822 XER: 00000000 CFAR: c000000000299a70 SOFTE: 0 GPR00: c0000000002a4534 c000003f7772b9e0 c000000001606200 c000003fef858908 GPR04: c000003f776ac900 0000000000000001 ffffffffffffffff 0000003fee730000 GPR08: 0000000000000000 0000000000000000 c0000000011220d8 0000000000000002 GPR12: c00000000029bb80 c000000007a3d900 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c000003f776ad090 c000000000c71354 GPR24: c000003fef716780 0000003fee730000 c000003fe69d4200 c000003f776ad330 GPR28: c0000000011220d8 0000000000000001 c0000000014c6108 c000003fef858900 NIP [c000000000299b70] perf_pmu_sched_task+0x170/0x180 LR [c0000000002a4534] __perf_event_task_sched_in+0xc4/0x230 Call Trace: perf_iterate_sb+0x158/0x2a0 (unreliable) __perf_event_task_sched_in+0xc4/0x230 finish_task_switch+0x21c/0x310 __schedule+0x304/0xb80 schedule+0x40/0xc0 do_wait+0x254/0x2e0 kernel_wait4+0xa0/0x1a0 SyS_wait4+0x64/0xc0 system_call+0x58/0x6c Instruction dump: 3beafea0 7faa4800 409eff18 e8010060 eb610028 ebc10040 7c0803a6 38210050 eb81ffe0 eba1ffe8 ebe1fff8 4e800020 <0fe00000> 4bffffbc 60000000 60420000 ---[ end trace 8c46856d314c1811 ]--- The context switch call-backs for thread-imc are defined in sched_task function. So when thread-imc events are grouped with software pmu events, perf_pmu_sched_task hits the WARN_ON_ONCE condition, since software PMUs are assumed not to have a sched_task defined. Patch to move the thread_imc enable/disable opal call back from sched_task to event_[add/del] function Fixes: f74c89bd80fb ("powerpc/perf: Add thread IMC PMU support") Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Call trace observed while running perf-fuzzer:

  CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted 4.13.0-32-generic #35~lp1746225
  task: c000003f776ac900 task.stack: c000003f77728000
  NIP: c000000000299b70 LR: c0000000002a4534 CTR: c00000000029bb80
  REGS: c000003f7772b760 TRAP: 0700   Not tainted  (4.13.0-32-generic)
  MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>
    CR: 24008822  XER: 00000000
  CFAR: c000000000299a70 SOFTE: 0
  GPR00: c0000000002a4534 c000003f7772b9e0 c000000001606200 c000003fef858908
  GPR04: c000003f776ac900 0000000000000001 ffffffffffffffff 0000003fee730000
  GPR08: 0000000000000000 0000000000000000 c0000000011220d8 0000000000000002
  GPR12: c00000000029bb80 c000000007a3d900 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 c000003f776ad090 c000000000c71354
  GPR24: c000003fef716780 0000003fee730000 c000003fe69d4200 c000003f776ad330
  GPR28: c0000000011220d8 0000000000000001 c0000000014c6108 c000003fef858900
  NIP [c000000000299b70] perf_pmu_sched_task+0x170/0x180
  LR [c0000000002a4534] __perf_event_task_sched_in+0xc4/0x230
  Call Trace:
    perf_iterate_sb+0x158/0x2a0 (unreliable)
    __perf_event_task_sched_in+0xc4/0x230
    finish_task_switch+0x21c/0x310
    __schedule+0x304/0xb80
    schedule+0x40/0xc0
    do_wait+0x254/0x2e0
    kernel_wait4+0xa0/0x1a0
    SyS_wait4+0x64/0xc0
    system_call+0x58/0x6c
  Instruction dump:
  3beafea0 7faa4800 409eff18 e8010060 eb610028 ebc10040 7c0803a6 38210050
  eb81ffe0 eba1ffe8 ebe1fff8 4e800020 <0fe00000> 4bffffbc 60000000 60420000
  ---[ end trace 8c46856d314c1811 ]---

The context switch call-backs for thread-imc are defined in sched_task function.
So when thread-imc events are grouped with software pmu events,
perf_pmu_sched_task hits the WARN_ON_ONCE condition, since software PMUs are
assumed not to have a sched_task defined.

Patch to move the thread_imc enable/disable opal call back from sched_task to
event_[add/del] function

Fixes: f74c89bd80fb ("powerpc/perf: Add thread IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: clean the inclusion of stringify.h 2018-07-30T12:48:17+00:00 Christophe Leroy christophe.leroy@c-s.fr 2018-07-05T16:24:59+00:00 5c35a02c545a7bbe77f3a1ae337d9e29beed079b Only include linux/stringify.h is files using __stringify() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Only include linux/stringify.h is files using __stringify()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/64s: Remove POWER9 DD1 support 2018-07-16T01:37:21+00:00 Nicholas Piggin npiggin@gmail.com 2018-07-05T08:47:00+00:00 2bf1071a8d50928a4ae366bb3108833166c2b70c POWER9 DD1 was never a product. It is no longer supported by upstream firmware, and it is not effectively supported in Linux due to lack of testing. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [mpe: Remove arch_make_huge_pte() entirely] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
POWER9 DD1 was never a product. It is no longer supported by upstream
firmware, and it is not effectively supported in Linux due to lack of
testing.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Remove arch_make_huge_pte() entirely]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
perf, tools: Use correct articles in comments 2018-07-15T22:21:03+00:00 Tobias Tefke tobias.tefke@gmail.com 2018-07-09T10:57:15+00:00 788faab70d5a882693286b8d5022779559c79904 Some of the comments in the perf events code use articles incorrectly, using 'a' for words beginning with a vowel sound, where 'an' should be used. Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: jolsa@redhat.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com [ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.

Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
powerpc/perf: Unregister thread-imc if core-imc not supported 2018-06-03T10:43:37+00:00 Anju T Sudhakar anju@linux.vnet.ibm.com 2018-05-22T09:12:37+00:00 25af86b2aeb60dd52bd18a875124490e23bd4515 Since thread-imc internally use the core-imc hardware infrastructure and is depended on it, having thread-imc in the kernel in the absence of core-imc is trivial. Patch disables thread-imc, if core-imc is not registered. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Since thread-imc internally use the core-imc hardware infrastructure
and is depended on it, having thread-imc in the kernel in the
absence of core-imc is trivial. Patch disables thread-imc, if
core-imc is not registered.

Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>