Since commit aec0ba7472a7 ("powerpc/64: Use -mprofile-kernel for big
endian ELFv2 kernels"), this file is checked by objtool. Fix warnings
such as:

  arch/powerpc/kernel/idle_64e.o: warning: objtool: .text+0x20: unannotated intra-function call
  arch/powerpc/kernel/exceptions-64e.o: warning: objtool: .text+0x218: unannotated intra-function call

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230622112451.735268-1-mpe@ellerman.id.au

Nageswara reported that /proc/self/status was showing "vulnerable" for
the Speculation_Store_Bypass feature on Power10, eg:

  $ grep Speculation_Store_Bypass: /proc/self/status
  Speculation_Store_Bypass:       vulnerable

But at the same time the sysfs files, and lscpu, were showing "Not
affected".

This turns out to simply be a bug in the reporting of the
Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case.

When SEC_FTR_STF_BARRIER was added, so that firmware could communicate
the vulnerability was not present, the code in ssb_prctl_get() was not
updated to check the new flag.

So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than
adding the new check to the existing if block and expanding the comment
to cover both cases, rewrite the three cases to be separate so they can
be commented separately for clarity.

Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517074945.53188-1-mpe@ellerman.id.au

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.5-rc1.

  Included in here are:

   - tty_audit code cleanups from Jiri

   - more 8250 cleanups from Ilpo

   - samsung_tty driver bugfixes

   - 8250 lock port updates

   - usual fsl_lpuart driver updates and fixes

   - other small serial driver fixes and updates, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  tty_audit: make data of tty_audit_log() const
  tty_audit: make tty pointers in exposed functions const
  tty_audit: make icanon a bool
  tty_audit: invert the condition in tty_audit_log()
  tty_audit: use kzalloc() in tty_audit_buf_alloc()
  tty_audit: use TASK_COMM_LEN for task comm
  Revert "8250: add support for ASIX devices with a FIFO bug"
  serial: atmel: don't enable IRQs prematurely
  tty: serial: Add Nuvoton ma35d1 serial driver support
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  tty: serial: imx: fix rs485 rx after tx
  selftests: tty: add selftest for tty timestamp updates
  tty: tty_io: update timestamps on all device nodes
  tty: fix hang on tty device with no_room set
  serial: core: fix -EPROBE_DEFER handling in init
  serial: 8250_omap: Use force_suspend and resume for system suspend
  tty: serial: samsung_tty: Use abs() to simplify some code
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Remove the deprecated rule to build *.dtbo from *.dts

 - Refactor section mismatch detection in modpost

 - Fix bogus ARM section mismatch detections

 - Fix error of 'make gtags' with O= option

 - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
   with the latest LLVM version

 - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed

 - Ignore more compiler-generated symbols for kallsyms

 - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles

 - Enable more kernel-doc warnings with W=2

 - Refactor <linux/export.h> by generating KSYMTAB data by modpost

 - Deprecate <asm/export.h> and <asm-generic/export.h>

 - Remove the EXPORT_DATA_SYMBOL macro

 - Move the check for static EXPORT_SYMBOL back to modpost, which makes
   the build faster

 - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm

 - Warn missing MODULE_DESCRIPTION when building modules with W=1

 - Make 'make clean' robust against too long argument error

 - Exclude more objects from GCOV to fix CFI failures with GCOV

 - Allow 'make modules_install' to install modules.builtin and
   modules.builtin.modinfo even when CONFIG_MODULES is disabled

 - Include modules.builtin and modules.builtin.modinfo in the
   linux-image Debian package even when CONFIG_MODULES is disabled

 - Revive "Entering directory" logging for the latest Make version

* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
  modpost: define more R_ARM_* for old distributions
  kbuild: revive "Entering directory" for Make >= 4.4.1
  kbuild: set correct abs_srctree and abs_objtree for package builds
  scripts/mksysmap: Ignore prefixed KCFI symbols
  kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
  kbuild: builddeb: always make modules_install, to install modules.builtin*
  modpost: continue even with unknown relocation type
  modpost: factor out Elf_Sym pointer calculation to section_rel()
  modpost: factor out inst location calculation to section_rel()
  kbuild: Disable GCOV for *.mod.o
  kbuild: Fix CFI failures with GCOV
  kbuild: make clean rule robust against too long argument error
  script: modpost: emit a warning when the description is missing
  kbuild: make modules_install copy modules.builtin(.modinfo)
  linux/export.h: rename 'sec' argument to 'license'
  modpost: show offset from symbol for section mismatch warnings
  modpost: merge two similar section mismatch warnings
  kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
  modpost: use null string instead of NULL pointer for default namespace
  modpost: squash sym_update_namespace() into sym_add_exported()
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Export pcie_retrain_link() for use outside ASPM

   - Add Data Link Layer Link Active Reporting as another way for
     pcie_retrain_link() to determine the link is up

   - Work around link training failures (especially on the ASMedia
     ASM2824 switch) by training first at 2.5GT/s and then attempting
     higher rates

  Resource management:

   - When we coalesce host bridge windows, remove invalidated resources
     from the resource tree so future allocations work correctly

  Hotplug:

   - Cancel bringup sequence if card is not present, to keep from
     blinking Power Indicator indefinitely

   - Reassign bridge resources if necessary for ACPI hotplug

  Driver binding:

   - Convert platform_device .remove() callbacks to return void instead
     of a mostly useless int

  Power management:

   - Reduce wait time for secondary bus to be ready to speed up resume

   - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
     D3cold

   - Call _REG when transitioning D-states so AML that uses the PCI
     config space OpRegion works, which fixes some ASMedia GPIO
     controllers after resume

  Virtualization:

   - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
     hang when guest is rebooted

   - Add function 1 DMA alias quirk for Marvell 88SE9235

  Error handling:

   - Unexport pci_save_aer_state() since it's only used in drivers/pci/

   - Drop recommendation for drivers to configure AER Capability, since
     the PCI core does this for all devices

  ASPM:

   - Disable ASPM on MFD function removal to avoid use-after-free

   - Tighten up pci_enable_link_state() and pci_disable_link_state()
     interfaces so they don't enable/disable states the driver didn't
     specify

   - Avoid link retraining race that can happen if ASPM sets link
     control parameters while the link is in the midst of training for
     some other reason

  Endpoint framework:

   - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
     different from "PCI Endpoint NTB driver"

   - Automatically create a function specific attributes group for
     endpoint drivers to avoid reference counting issues

   - Fix many EPC test issues

   - Return pci_epf_type_add_cfs() error if EPF has no driver

   - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
     MSI vector parameters

   - Pass EPF device ID to driver probe functions

   - Return -EALREADY if EPC has already been started/stopped

   - Add linkdown notifier support and use it in qcom-ep

   - Add Bus Master Enable event support and use it in qcom-ep

   - Add Qualcomm Modem Host Interface (MHI) endpoint driver

   - Add Layerscape PME interrupt handling to manage link-up
     notification

  Cadence PCIe controller driver:

   - Wait for link retrain to complete when working around the J721E
     i2085 erratum with Gen2 mode

  Faraday FTPC100 PCI controller driver:

   - Release clock resources on error paths

  Freescale i.MX6 PCIe controller driver:

   - Save and restore Root Port MSI control to work around hardware defect

  Intel VMD host bridge driver:

   - Reset VMD config register between soft reboots

   - Capture pci_reset_bus() return value instead of printing junk when
     it fails

  Qualcomm PCIe controller driver:

   - Add SDX65 endpoint compatible string to DT binding

   - Disable register write access after init for IP v2.3.3, v2.9.0

   - Use DWC helpers for enabling/disabling writes to DBI registers

   - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
     v2.3.3, v2.7.0, v2.9.0

   - Reuse v2.3.2 post-init sequence for v2.4.0

  Renesas R-Car PCIe controller driver:

   - Remove unused static pcie_base and pcie_dev

  Rockchip PCIe controller driver:

   - Remove writes to unused registers

   - Write endpoint Device ID using correct register

   - Assert PCI Configuration Enable bit after probe so endpoint
     responds instead of generating Request Retry Status messages

   - Poll waiting for PHY PLLs to lock

   - Update RK3399 example DT binding to be valid

   - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
     manually generating PCIe message

   - Use multiple windows to avoid address translation conflicts

   - Use u32 (not u16) when accessing 32-bit registers

   - Hide MSI-X Capability, since RK3399 can't generate MSI-X

   - Set endpoint controller required alignment to 256

  Synopsys DesignWare PCIe controller driver:

   - Wait for link to come up only if we've initiated link training

  Miscellaneous:

   - Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  Documentation: PCI: correct spelling
  PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
  PCI: xgene-msi: Convert to platform remove callback returning void
  PCI: tegra: Convert to platform remove callback returning void
  PCI: rockchip-host: Convert to platform remove callback returning void
  PCI: mvebu: Convert to platform remove callback returning void
  PCI: mt7621: Convert to platform remove callback returning void
  PCI: mediatek-gen3: Convert to platform remove callback returning void
  PCI: mediatek: Convert to platform remove callback returning void
  PCI: iproc: Convert to platform remove callback returning void
  PCI: hisi-error: Convert to platform remove callback returning void
  PCI: dwc: Convert to platform remove callback returning void
  PCI: j721e: Convert to platform remove callback returning void
  PCI: brcmstb: Convert to platform remove callback returning void
  PCI: altera-msi: Convert to platform remove callback returning void
  PCI: altera: Convert to platform remove callback returning void
  PCI: aardvark: Convert to platform remove callback returning void
  PCI: rcar: Use correct product family name for Renesas R-Car
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  ...

Pull powerpc updates from Michael Ellerman:

 - Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations

 - Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
   use the -mprofile-kernel option (kernel specific ftrace ABI) for big
   endian ELFv2 kernels

 - Add initial Dynamic Execution Control Register (DEXCR) support, and
   allow the ROP protection instructions to be used on Power 10

 - Various other small features and fixes

Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.

* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
  powerpc: remove checks for binutils older than 2.25
  powerpc: Fail build if using recordmcount with binutils v2.37
  powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
  powerpc/iommu: Only build sPAPR access functions on pSeries
  powerpc: powernv: Annotate data races in opal events
  powerpc: Mark writes registering ipi to host cpu through kvm and polling
  powerpc: Annotate accesses to ipi message flags
  powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
  powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
  powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
  powerpc: qspinlock: Mark accesses to qnode lock checks
  powerpc/powernv/pci: Remove last IODA1 defines
  powerpc/powernv/pci: Remove MVE code
  powerpc/powernv/pci: Remove ioda1 support
  powerpc: 52xx: Make immr_id DT match tables static
  powerpc: mpc512x: Remove open coded "ranges" parsing
  powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
  powerpc: fsl: Use of_property_read_reg() to parse "reg"
  powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
  macintosh: Use of_property_read_reg() to parse "reg"
  ...

Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...

Pull ordered workqueue creation updates from Tejun Heo:
 "For historical reasons, unbound workqueues with max concurrency limit
  of 1 are considered ordered, even though the concurrency limit hasn't
  been system-wide for a long time.

  This creates ambiguity around whether ordered execution is actually
  required for correctness, which was actually confusing for e.g. btrfs
  (btrfs updates are being routed through the btrfs tree).

  There aren't that many users in the tree which use the combination and
  there are pending improvements to unbound workqueue affinity handling
  which will make inadvertent use of ordered workqueue a bigger loss.

  This clarifies the situation for most of them by updating the ones
  which require ordered execution to use alloc_ordered_workqueue().

  There are some conversions being routed through subsystem-specific
  trees and likely a few stragglers. Once they're all converted,
  workqueue can trigger a warning on unbound + @max_active==1 usages and
  eventually drop the implicit ordered behavior"

* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
  net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
  net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
  dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
  media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
  scsi: NCR5380: Use default @max_active for hostdata->work_q
  media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
  crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: mwifiex: Use default @max_active for workqueues
  wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
  xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
  virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
  net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
  greybus: Use alloc_ordered_workqueue() to create ordered workqueues
  powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues

Pull objtool updates from Ingo Molar:
 "Build footprint & performance improvements:

   - Reduce memory usage with CONFIG_DEBUG_INFO=y

     In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
     DWARF creates almost 200 million relocations, ballooning objtool's
     peak heap usage to 53GB. These patches reduce that to 25GB.

     On a distro-type kernel with kernel IBT enabled, they reduce
     objtool's peak heap usage from 4.2GB to 2.8GB.

     These changes also improve the runtime significantly.

  Debuggability improvements:

   - Add the unwind_debug command-line option, for more extend unwinding
     debugging output
   - Limit unreachable warnings to once per function
   - Add verbose option for disassembling affected functions
   - Include backtrace in verbose mode
   - Detect missing __noreturn annotations
   - Ignore exc_double_fault() __noreturn warnings
   - Remove superfluous global_noreturns entries
   - Move noreturn function list to separate file
   - Add __kunit_abort() to noreturns

  Unwinder improvements:

   - Allow stack operations in UNWIND_HINT_UNDEFINED regions
   - drm/vmwgfx: Add unwind hints around RBP clobber

  Cleanups:

   - Move the x86 entry thunk restore code into thunk functions
   - x86/unwind/orc: Use swap() instead of open coding it
   - Remove unnecessary/unused variables

  Fixes for modern stack canary handling"

* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
  objtool: Skip reading DWARF section data
  objtool: Free insns when done
  objtool: Get rid of reloc->rel[a]
  objtool: Shrink elf hash nodes
  objtool: Shrink reloc->sym_reloc_entry
  objtool: Get rid of reloc->jump_table_start
  objtool: Get rid of reloc->addend
  objtool: Get rid of reloc->type
  objtool: Get rid of reloc->offset
  objtool: Get rid of reloc->idx
  objtool: Get rid of reloc->list
  objtool: Allocate relocs in advance for new rela sections
  objtool: Add for_each_reloc()
  objtool: Don't free memory in elf_close()
  objtool: Keep GElf_Rel[a] structs synced
  objtool: Add elf_create_section_pair()
  objtool: Add mark_sec_changed()
  objtool: Fix reloc_hash size
  objtool: Consolidate rel/rela handling
  ...