linux.git/arch/powerpc/kernel/sysfs.c, branch v4.11

powerpc/sysfs: Convert to hotplug state machine

2016-11-22T22:34:42+00:00

Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.

The previous convention of keeping the files around until the CPU is dead
has not been preserved as there is no point to keep them available when the
cpu is going down. This makes the hotplug call symmetric.

Signed-off-by: Sebastian Andrzej Siewior 
Cc: Benjamin Herrenschmidt 
Cc: rt@linuxtronix.de
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20161117183541.8588-17-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner

powerpc/sparse: make some things static

2016-06-16T12:23:11+00:00

This is just a smattering of things picked up by sparse that should
be made static.

Signed-off-by: Daniel Axtens 
Signed-off-by: Michael Ellerman

powerpc/dscr: Add some in-code documentation

2015-06-07T09:29:15+00:00

This patch adds some in-code documentation to the DSCR related code to
make it more readable without having any functional change to it.

Signed-off-by: Anshuman Khandual 
Signed-off-by: Michael Ellerman

powerpc: Replace __get_cpu_var uses

2014-11-03T01:12:32+00:00

This still has not been merged and now powerpc is the only arch that does
not have this change. Sorry about missing linuxppc-dev before.

V2->V2
  - Fix up to work against 3.18-rc1

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Benjamin Herrenschmidt 
CC: Paul Mackerras 
Signed-off-by: Christoph Lameter 
[mpe: Fix build errors caused by set/or_softirq_pending(), and rework
      assignment in __set_breakpoint() to use memcpy().]
Signed-off-by: Michael Ellerman

powerpc: Fix regression of per-CPU DSCR setting

2014-05-28T03:35:40+00:00

Since commit "efcac65 powerpc: Per process DSCR + some fixes (try#4)"
it is no longer possible to set the DSCR on a per-CPU basis.

The old behaviour was to minipulate the DSCR SPR directly but this is no
longer sufficient: the value is quickly overwritten by context switching.

This patch stores the per-CPU DSCR value in a kernel variable rather than
directly in the SPR and it is used whenever a process has not set the DSCR
itself. The sysfs interface (/sys/devices/system/cpu/cpuN/dscr) is unchanged.

Writes to the old global default (/sys/devices/system/cpu/dscr_default)
now set all of the per-CPU values and reads return the last written value.

The new per-CPU default is added to the paca_struct and is used everywhere
outside of sysfs.c instead of the old global default.

Signed-off-by: Sam Bobroff 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Split __SYSFS_SPRSETUP macro

2014-05-28T03:35:39+00:00

Split the __SYSFS_SPRSETUP macro into two parts so that registers requiring
custom read and write functions can use common code for their show and store
functions.

Signed-off-by: Sam Bobroff 
Signed-off-by: Benjamin Herrenschmidt

powerpc, sysfs: Fix CPU hotplug callback registration

2014-03-20T12:43:42+00:00

Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	register_cpu_notifier(&foobar_cpu_notifier);

	put_online_cpus();

This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).

Instead, the correct and race-free way of performing the callback
registration is:

	cpu_notifier_register_begin();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	/* Note the use of the double underscored version of the API */
	__register_cpu_notifier(&foobar_cpu_notifier);

	cpu_notifier_register_done();

Fix the sysfs code in powerpc by using this latter form of callback
registration.

Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Olof Johansson 
Cc: Wang Dongsheng 
Cc: Ingo Molnar 
Acked-by: Madhavan Srinivasan 
Signed-off-by: Srivatsa S. Bhat 
Signed-off-by: Rafael J. Wysocki

powerpc/pseries/cpuidle: smt-snooze-delay cleanup.

2014-01-29T06:02:24+00:00

smt-snooze-delay was designed to disable NAP state or delay the entry
to the NAP state prior to adoption of cpuidle framework. This
is per-cpu variable. With the coming of CPUIDLE framework,
states can be disabled on per-cpu basis using the cpuidle/enable
sysfs entry.

Also, with the coming of cpuidle driver each state's target residency
is per-driver unlike earlier which was per-device. Therefore,
the per-cpu sysfs smt-snooze-delay which decides the target residency
of the idle state on a particular cpu causes more confusion to the user
as we cannot have different smt-snooze-delay (target residency)
values for each cpu.

In the current code, smt-snooze-delay functionality is completely broken.
It makes sense to remove smt-snooze-delay from idle driver with the
coming of cpuidle framework.
However, sysfs files are retained as ppc64_util currently
utilises it. Once we fix ppc64_util, propose to clean
up the kernel code.

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

powerpc/85xx: add sysfs for pw20 state and altivec idle

2014-01-09T23:51:38+00:00

Add a sys interface to enable/diable pw20 state or altivec idle, and
control the wait entry time.

Enable/Disable interface:
    0, disable. 1, enable.
    /sys/devices/system/cpu/cpuX/pw20_state
    /sys/devices/system/cpu/cpuX/altivec_idle

Set wait time interface:(Nanosecond)
    /sys/devices/system/cpu/cpuX/pw20_wait_time
    /sys/devices/system/cpu/cpuX/altivec_idle_wait_time
Example: Base on TBfreq is 41MHZ.
    1~48(ns): TB[63]
    49~97(ns): TB[62]
    98~195(ns): TB[61]
    196~390(ns): TB[60]
    391~780(ns): TB[59]
    781~1560(ns): TB[58]
    ...

Signed-off-by: Wang Dongsheng 
[scottwood@freescale.com: change ifdef]
Signed-off-by: Scott Wood

powerpc/kernel/sysfs: Cleanup set up macros for PMC/non-PMC SPRs

2013-12-02T03:16:04+00:00

Currently PMC (Performance Monitor Counter) setup macros are used
for other SPRs. Since not all SPRs are PMC related, this patch
modifies the exisiting macro and uses it to setup both PMC and
non PMC SPRs accordingly.

Signed-off-by: Madhavan Srinivasan 
Acked-by: Olof Johansson 
Acked-by: Michael Ellerman 
Signed-off-by: Benjamin Herrenschmidt