linux.git/arch/powerpc/kernel/smp.c, branch v5.9

powerpc/book3s64/kuap: Move UAMOR setup to key init function

2020-07-20T12:57:59+00:00

UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.

Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.

Before commit: 4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.

Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

powerpc: Fix misleading small cores print

2020-06-02T10:59:06+00:00

Currently when we boot on a big core system, we get this print:
  [    0.040500] Using small cores at SMT level

This is misleading as we've actually detected big cores.

This patch clears up the print to say we've detect big cores but are
using small cores for scheduling.

Signed-off-by: Michael Neuling 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200528230731.1235752-1-mikey@neuling.org

powerpc/smp: Use IS_ENABLED() to avoid #ifdef

2020-03-26T14:15:09+00:00

We can avoid the #ifdef by using IS_ENABLED() in the existing
condition check.

Signed-off-by: Michael Ellerman 
Reviewed-by: Srikar Dronamraju 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200313112020.28235-2-mpe@ellerman.id.au

powerpc/smp: Drop superfluous NULL check

2020-03-26T14:15:09+00:00

We don't need the NULL check of np, the result is the same because the
OF helpers cope with NULL, of_node_to_nid(NULL) == NUMA_NO_NODE (-1).

Signed-off-by: Michael Ellerman 
Reviewed-by: Srikar Dronamraju 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200313112020.28235-1-mpe@ellerman.id.au

powerpc/numa: Remove late request for home node associativity

2020-03-04T11:44:31+00:00

With commit ("powerpc/numa: Early request for home node associativity"),
commit 2ea626306810 ("powerpc/topology: Get topology for shared
processors at boot") which was requesting home node associativity
becomes redundant.

Hence remove the late request for home node associativity.

Signed-off-by: Srikar Dronamraju 
Reported-by: Abdul Haleem 
Reviewed-by: Nathan Lynch 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200129135301.24739-6-srikar@linux.vnet.ibm.com

powerpc/smp: Use nid as fallback for package_id

2020-03-04T11:44:30+00:00

package_id is to match cores that are part of the same chip. On
PowerNV machines, package_id defaults to chip_id. However ibm,chip_id
property is not present in device-tree of PowerVM LPARs. Hence lscpu
output shows one core per socket and multiple cores.

To overcome this, use nid as the package_id on PowerVM LPARs.

Before the patch:

  Architecture:        ppc64le
  Byte Order:          Little Endian
  CPU(s):              128
  On-line CPU(s) list: 0-127
  Thread(s) per core:  8
  Core(s) per socket:  1                     <----------------------
  Socket(s):           16                    <----------------------
  NUMA node(s):        2
  Model:               2.2 (pvr 004e 0202)
  Model name:          POWER9 (architected), altivec supported
  Hypervisor vendor:   pHyp
  Virtualization type: para
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            512K
  L3 cache:            10240K
  NUMA node0 CPU(s):   0-63
  NUMA node1 CPU(s):   64-127
  #
  # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id
  -1

After the patch:

  Architecture:        ppc64le
  Byte Order:          Little Endian
  CPU(s):              128
  On-line CPU(s) list: 0-127
  Thread(s) per core:  8                     <---------------------
  Core(s) per socket:  8                     <---------------------
  Socket(s):           2
  NUMA node(s):        2
  Model:               2.2 (pvr 004e 0202)
  Model name:          POWER9 (architected), altivec supported
  Hypervisor vendor:   pHyp
  Virtualization type: para
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            512K
  L3 cache:            10240K
  NUMA node0 CPU(s):   0-63
  NUMA node1 CPU(s):   64-127
  #
  # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id
  0

Now lscpu output is more in line with the system configuration.

Signed-off-by: Srikar Dronamraju 
[mpe: Use pkg_id instead of ppid, tweak change log and comment]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200129135121.24617-1-srikar@linux.vnet.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

powerpc: 'current_set' is now a table of task_struct pointers

2019-02-23T11:31:40+00:00

The table of pointers 'current_set' has been used for retrieving
the stack and current. They used to be thread_info pointers as
they were pointing to the stack and current was taken from the
'task' field of the thread_info.

Now, the pointers of 'current_set' table are now both pointers
to task_struct and pointers to thread_info.

As they are used to get current, and the stack pointer is
retrieved from current's stack field, this patch changes
their type to task_struct, and renames secondary_ti to
secondary_current.

Reviewed-by: Nicholas Piggin 
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman