linux.git/arch/powerpc/kernel/setup_32.c, branch v3.17

powerpc: Make boot_cpuid common between 32 and 64-bit

2014-04-07T00:33:14+00:00

Move the definition to setup-common.c and set the init value
to -1 on both 32 and 64-bit (it was 0 on 64-bit).

Additionally add a check to prom.c to garantee that the init
value has been udpated after the DT scan.

Signed-off-by: Benjamin Herrenschmidt

powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP

2014-02-11T00:24:52+00:00

We would allocate one specific exception stack for each kind of
non-base exceptions for every CPU. For ppc32 the CPU hard ID is
used as the subscript to get the specific exception stack for
one CPU. But for an UP kernel, there is only one element in the
each kind of exception stack array. We would get stuck if the
CPU hard ID is not equal to '0'. So in this case we should use the
subscript '0' no matter what the CPU hard ID is.

Signed-off-by: Kevin Hao 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Clean up panic_timeout usage

2013-11-26T11:12:28+00:00

Default CONFIG_PANIC_TIMEOUT to 180 seconds on powerpc. The
pSeries continue to set the timeout to 10 seconds at run-time.

Thus, there's a small window where we don't have the correct
value on pSeries, but if this is only run-time discoverable we
don't have a better option. In any case, if the user changes the
default setting of 180 seconds, we honor that user setting.

Signed-off-by: Jason Baron 
Cc: benh@kernel.crashing.org
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: mpe@ellerman.id.au
Cc: felipe.contreras@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Linus Torvalds 
Cc: Andrew Morton 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/705bbe0f70fb20759151642ba0176a6414ec9f7a.1385418410.git.jbaron@akamai.com
Signed-off-by: Ingo Molnar

powerpc: Move local setup.h declarations to arch includes

2013-10-30T05:00:31+00:00

Move the few declarations from arch/powerpc/kernel/setup.h
into arch/powerpc/include/asm/setup.h.  This resolves a
sparse warning for arch/powerpc/mm/numa.c which defines
do_init_bootmem() but can't include the setup.h header
in the prior path.

Resolves:
arch/powerpc/mm/numa.c:998:13:
        warning: symbol 'do_init_bootmem' was not declared.
                 Should it be static?

Signed-off-by: Robert C Jennings 
Signed-off-by: Benjamin Herrenschmidt

powerpc/85xx: Move ePAPR paravirt initialization earlier

2013-08-07T23:38:06+00:00

At console init, when the kernel tries to flush the log buffer
the ePAPR byte-channel based console write fails silently,
losing the buffered messages.
This happens because The ePAPR para-virtualization init isn't
done early enough so that the hcall instruction to be set,
causing the byte-channel write hcall to be a nop.
To fix, change the ePAPR para-virt init to use early device
tree functions and move it in early init.

Signed-off-by: Laurentiu Tudor 
Signed-off-by: Scott Wood

powerpc/watchdog: move booke watchdog param related code to setup-common.c

2012-07-11T12:44:03+00:00

Currently, BOOKE watchdog code for checking "wdt" and "wdt_period" is
in setup_32.c, it cannot be used in 64-bit, so move it to a common place
setup-common.c, which will be shared by 32-bit and 64-bit.

Also, replace the simple_strtoul with kstrtol.

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc: fix build when CONFIG_BOOKE_WDT is enabled

2012-04-19T19:55:43+00:00

Commit ae3a197e (Disintegrate asm/system.h for PowerPC) broke build of
assembly files when CONFIG_BOOKE_WDT is enabled as follows:

  AS      arch/powerpc/lib/string.o
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h: Assembler messages:
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:19: Error: Unrecognized opcode: `extern'
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:20: Error: Unrecognized opcode: `extern'

Since setup_32.c is the only user of the booke_wdt configuration variables, move
the declarations there.

Cc: David Howells 
Signed-off-by: Baruch Siach 
Signed-off-by: Kumar Gala

Disintegrate asm/system.h for PowerPC

2012-03-28T17:30:02+00:00

Disintegrate asm/system.h for PowerPC.

Signed-off-by: David Howells 
Acked-by: Benjamin Herrenschmidt 
cc: linuxppc-dev@lists.ozlabs.org

powerpc: Copy down exception vectors after feature fixups

2011-11-16T03:47:54+00:00

kdump fails because we try to execute an HV only instruction. Feature
fixups are being applied after we copy the exception vectors down to 0
so they miss out on any updates.

We have always had this issue but it only became critical in v3.0
when we added CFAR support (breaks POWER5) and v3.1 when we added
POWERNV (breaks everyone).

Signed-off-by: Anton Blanchard 
Cc:  [v3.0+]
Signed-off-by: Benjamin Herrenschmidt

powerpc/32: Pass device tree address as u64 to machine_init

2011-09-19T23:19:47+00:00

u64 is used rather than phys_addr_t to keep things simple, as
this is called from assembly code.

Update callers to pass a 64-bit address in r3/r4.  Other unused
register assignments that were once parameters to machine_init
are dropped.

For FSL BookE, look up the physical address of the device tree from the
effective address passed in r3 by the loader.  This is required for
situations where memory does not start at zero (due to AMP or IOMMU-less
virtualization), and thus the IMA doesn't start at zero, and thus the
device tree effective address does not equal the physical address.

Signed-off-by: Scott Wood 
Signed-off-by: Benjamin Herrenschmidt