linux.git/arch/powerpc/kernel/rtas.c, branch v2.6.20

[POWERPC] Add rtas_service_present() helper

2006-12-08T06:10:22+00:00

To test for the existence of an RTAS function, we typically do:

   foo_token = rtas_token("foo");
   if (foo_token == RTAS_UNKNOWN_SERVICE)
      return;

Add a rtas_service_present method, which provides a more conventional
boolean interface for testing the existence of an RTAS method.

Signed-off-by: Nathan Lynch 
Signed-off-by: Paul Mackerras

[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.c

2006-12-08T04:55:54+00:00

As the first step in consolidating the pseries hotplug cpu code,
create platforms/pseries/hotplug-cpu.c and move rtas_stop_self()
into it.  Do the rtas token initialisation in a new initcall, rather
than rtas_initialize().

Signed-off-by: Michael Ellerman 
Acked-by: Linas Vepstas 
Signed-off-by: Paul Mackerras

[POWERPC] Wrap cpu_die() with CONFIG_HOTPLUG_CPU

2006-12-04T09:39:29+00:00

Per email discussion, it appears that rtas_stop_self()
and pSeries_mach_cpu_die() should not be compiled if
CONFIG_HOTPLUG_CPU is not defined. This patch adds
#ifdefs around these bits of code.

Signed-off-by: Linas Vepstas 
Signed-off-by: Paul Mackerras

[POWERPC] reboot when panic_timout is set

2006-08-25T03:30:26+00:00

Only call into RTAS when booted with panic=0 because the RTAS call
does not return.  The system has to be rebooted via the HMC or via the
management console right now.  This is cumbersome and not what the
default panic=180 is supposed to do.

Signed-off-by: Olaf Hering 
Signed-off-by: Paul Mackerras

[POWERPC] powerpc: Make RTAS console init generic

2006-08-25T03:27:35+00:00

The rtas console doesn't have to be Cell specific.  If we get both
RTAS tokens, we should just enabled the console then and there.

Signed-off-by: Michael Neuling 
Signed-off-by: Paul Mackerras

Merge branch 'merge'

2006-08-08T07:09:11+00:00

[POWERPC] Fix might-sleep warning on removing cpus

2006-08-08T06:00:11+00:00

Noticing the following might_sleep warning (dump_stack()) during kdump
testing when CONFIG_DEBUG_SPINLOCK_SLEEP is enabled. All secondary CPUs
will be calling rtas_set_indicator with interrupts disabled to remove
them from global interrupt queue.

BUG: sleeping function called from invalid context at
arch/powerpc/kernel/rtas.c:463
in_atomic():1, irqs_disabled():1
Call Trace:
[C00000000FFFB970] [C000000000010234] .show_stack+0x68/0x1b0 (unreliable)
[C00000000FFFBA10] [C000000000059354] .__might_sleep+0xd8/0xf4
[C00000000FFFBA90] [C00000000001D1BC] .rtas_busy_delay+0x20/0x5c
[C00000000FFFBB20] [C00000000001D8A8] .rtas_set_indicator+0x6c/0xcc
[C00000000FFFBBC0] [C000000000048BF4] .xics_teardown_cpu+0x118/0x134
[C00000000FFFBC40] [C00000000004539C]
.pseries_kexec_cpu_down_xics+0x74/0x8c
[C00000000FFFBCC0] [C00000000002DF08] .crash_ipi_callback+0x15c/0x188
[C00000000FFFBD50] [C0000000000296EC] .smp_message_recv+0x84/0xdc
[C00000000FFFBDC0] [C000000000048E08] .xics_ipi_dispatch+0xf0/0x130
[C00000000FFFBE50] [C00000000009EF10] .handle_IRQ_event+0x7c/0xf8
[C00000000FFFBF00] [C0000000000A0A14] .handle_percpu_irq+0x90/0x10c
[C00000000FFFBF90] [C00000000002659C] .call_handle_irq+0x1c/0x2c
[C00000000058B9C0] [C00000000000CA10] .do_IRQ+0xf4/0x1a4
[C00000000058BA50] [C0000000000044EC] hardware_interrupt_entry+0xc/0x10
 --- Exception: 501 at .plpar_hcall_norets+0x14/0x1c
   LR = .pseries_dedicated_idle_sleep+0x190/0x1d4
[C00000000058BD40] [C00000000058BDE0] 0xc00000000058bde0 (unreliable)
[C00000000058BDF0] [C00000000001270C] .cpu_idle+0x10c/0x1e0
[C00000000058BE70] [C000000000009274] .rest_init+0x44/0x5c

To fix this issue, rtas_set_indicator_fast() is added so that will not
wait for RTAS 'busy' delay and this new function is used for kdump (in
xics_teardown_cpu()) and for CPU hotplug ( xics_migrate_irqs_away() and
xics_setup_cpu()).

Note that the platform architecture spec says that set-indicator
on the indicator we're using here is not permitted to return the
busy or extended busy status codes.

Signed-off-by: Haren Myneni 
Signed-off-by: Paul Mackerras

[POWERPC] clean up pseries hcall interfaces

2006-08-01T06:19:15+00:00

Our pseries hcall interfaces are out of control:

	plpar_hcall_norets
	plpar_hcall
	plpar_hcall_8arg_2ret
	plpar_hcall_4out
	plpar_hcall_7arg_7ret
	plpar_hcall_9arg_9ret

Create 3 interfaces to cover all cases:

	plpar_hcall_norets:	7 arguments no returns
	plpar_hcall:		6 arguments 4 returns
	plpar_hcall9:		9 arguments 9 returns

There are only 2 cases in the kernel that need plpar_hcall9, hopefully
we can keep it that way.

Pass in a buffer to stash return parameters so we avoid the &dummy1,
&dummy2 madness.

Signed-off-by: Anton Blanchard 
--
Signed-off-by: Paul Mackerras

[POWERPC] Constify & voidify get_property()

2006-07-31T05:55:04+00:00

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc core changes.

Signed-off-by: Jeremy Kerr 
Signed-off-by: Paul Mackerras

[POWERPC] Add udbg support for RTAS console

2006-06-28T01:59:48+00:00

Add udbg hooks for the RTAS console, based on the RTAS put-term-char
and get-term-char calls. Along with my previous patches, this should
enable debugging as soon as early_init_dt_scan_rtas() is called.

Signed-off-by: Michael Ellerman 
Signed-off-by: Paul Mackerras