linux.git/arch/powerpc/kernel/ptrace, branch v5.9

powerpc/ptrace: Fix build error in pkey_get()

2020-08-08T01:27:26+00:00

The merge resolution in commit 25d8d4eecace left ret no longer used,
leading to:

  arch/powerpc/kernel/ptrace/ptrace-view.c: In function ‘pkey_get’:
  arch/powerpc/kernel/ptrace/ptrace-view.c:473:6: error: unused variable ‘ret’
    473 |  int ret;

Fix it by removing ret.

Fixes: 25d8d4eecace ("Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux")
Signed-off-by: Michael Ellerman 
Signed-off-by: Linus Torvalds

Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-08-07T17:33:50+00:00

Pull powerpc updates from Michael Ellerman:

 - Add support for (optionally) using queued spinlocks & rwlocks.

 - Support for a new faster system call ABI using the scv instruction on
   Power9 or later.

 - Drop support for the PROT_SAO mmap/mprotect flag as it will be
   unsupported on Power10 and future processors, leaving us with no way
   to implement the functionality it requests. This risks breaking
   userspace, though we believe it is unused in practice.

 - A bug fix for, and then the removal of, our custom stack expansion
   checking. We now allow stack expansion up to the rlimit, like other
   architectures.

 - Remove the remnants of our (previously disabled) topology update
   code, which tried to react to NUMA layout changes on virtualised
   systems, but was prone to crashes and other problems.

 - Add PMU support for Power10 CPUs.

 - A change to our signal trampoline so that we don't unbalance the link
   stack (branch return predictor) in the signal delivery path.

 - Lots of other cleanups, refactorings, smaller features and so on as
   usual.

Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.

* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
  selftests/powerpc: Fix pkey syscall redefinitions
  powerpc: Fix circular dependency between percpu.h and mmu.h
  powerpc/powernv/sriov: Fix use of uninitialised variable
  selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
  powerpc/40x: Fix assembler warning about r0
  powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
  powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  cpuidle: pseries: Fixup exit latency for CEDE(0)
  cpuidle: pseries: Add function to parse extended CEDE records
  cpuidle: pseries: Set the latency-hint before entering CEDE
  selftests/powerpc: Fix online CPU selection
  powerpc/perf: Consolidate perf_callchain_user_[64|32]()
  powerpc/pseries/hotplug-cpu: Remove double free in error path
  powerpc/pseries/mobility: Add pr_debug() for device tree changes
  powerpc/pseries/mobility: Set pr_fmt()
  powerpc/cacheinfo: Warn if cache object chain becomes unordered
  powerpc/cacheinfo: Improve diagnostics about malformed cache lists
  powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
  powerpc/cacheinfo: Set pr_fmt()
  powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
  ...

powerpc: switch to ->regset_get()

2020-07-27T18:31:07+00:00

Note: compat variant of REGSET_TM_CGPR is almost certainly wrong;
it claims to be 48*64bit, but just as compat REGSET_GPR it stores
44*32bit of (truncated) registers + 4 32bit zeros... followed by
48 more 32bit zeroes.  Might be too late to change - it's a userland
ABI, after all ;-/

Signed-off-by: Al Viro

powerpc/book3s64/kuap: Move UAMOR setup to key init function

2020-07-20T12:57:59+00:00

UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.

Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.

Before commit: 4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.

Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com

powerpc/watchpoint: Use builtin ALIGN*() macros

2020-05-18T14:11:05+00:00

Currently we calculate hw aligned start and end addresses manually.
Replace them with builtin ALIGN_DOWN() and ALIGN() macros.

So far end_addr was inclusive but this patch makes it exclusive (by
avoiding -1) for better readability.

Suggested-by: Christophe Leroy 
Signed-off-by: Ravi Bangoria 
Signed-off-by: Michael Ellerman 
Reviewed-by: Michael Neuling 
Link: https://lore.kernel.org/r/20200514111741.97993-13-ravi.bangoria@linux.ibm.com

powerpc/watchpoint: Use loop for thread_struct->ptrace_bps

2020-05-18T14:11:05+00:00

ptrace_bps is already an array of size HBP_NUM_MAX. But we use
hardcoded index 0 while fetching/updating it. Convert such code
to loop over array.

ptrace interface to use multiple watchpoint remains same. eg:
two PPC_PTRACE_SETHWDEBUG calls will create two watchpoint if
underneath hw supports it.

Signed-off-by: Ravi Bangoria 
Signed-off-by: Michael Ellerman 
Reviewed-by: Michael Neuling 
Link: https://lore.kernel.org/r/20200514111741.97993-11-ravi.bangoria@linux.ibm.com

powerpc/watchpoint: Convert thread_struct->hw_brk to an array

2020-05-18T14:11:05+00:00

So far powerpc hw supported only one watchpoint. But Power10 is
introducing 2nd DAWR. Convert thread_struct->hw_brk into an array.

Signed-off-by: Ravi Bangoria 
Signed-off-by: Michael Ellerman 
Reviewed-by: Michael Neuling 
Link: https://lore.kernel.org/r/20200514111741.97993-10-ravi.bangoria@linux.ibm.com

powerpc/watchpoint/ptrace: Return actual num of available watchpoints

2020-05-18T14:11:04+00:00

User can ask for num of available watchpoints(dbginfo.num_data_bps)
using ptrace(PPC_PTRACE_GETHWDBGINFO). Return actual number of
available watchpoints on the machine rather than hardcoded 1.

Signed-off-by: Ravi Bangoria 
Signed-off-by: Michael Ellerman 
Reviewed-by: Michael Neuling 
Link: https://lore.kernel.org/r/20200514111741.97993-5-ravi.bangoria@linux.ibm.com

powerpc: Use set_trap() and avoid open-coding trap masking

2020-05-15T01:58:54+00:00

The pt_regs.trap field keeps 4 low bits for some metadata about the
trap or how it was handled, which is masked off in order to test the
architectural trap number.

Add a set_trap() accessor to set this, equivalent to TRAP() for
returning it. This is actually not quite the equivalent of TRAP()
because it always clears the low bits, which may be harmless if
it can only be updated via ptrace syscall, but it seems dangerous.

In fact settting TRAP from ptrace doesn't seem like a great idea
so maybe it's better deleted.

Signed-off-by: Nicholas Piggin 
[mpe: Make it a static inline rather than a shouty macro]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200507121332.2233629-2-mpe@ellerman.id.au

powerpc/64: make buildable without CONFIG_COMPAT

2020-04-02T13:10:00+00:00

There are numerous references to 32bit functions in generic and 64bit
code so ifdef them out.

Signed-off-by: Michal Suchanek 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/e5619617020ef3a1f54f0c076e7d74cb9ec9f3bf.1584699455.git.msuchanek@suse.de