Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...

Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail
at linking with:
  arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable'

This was caused by commit c1fe190c0672 ("powerpc: Add force enable of
DAWR on P9 option").

This moves a bunch of code around to fix this. It moves a lot of the
DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable
compiling it.

Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Minor formatting in set_dawr()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.

The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.

The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:

force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

"Reconciling" in terms of interrupt handling, is to bring the soft irq
mask state in to synch with the hardware, after an interrupt causes
MSR[EE] to be cleared (while the soft mask may be enabled, and hard
irqs not marked disabled).

General kernel code should not be called while unreconciled, because
local_irq_disable, etc. manipulations can cause surprising irq traces,
and it's fragile because the soft irq code does not really expect to
be called in this situation.

When exiting from an interrupt, MSR[EE] is cleared to prevent races,
but soft irq state is enabled for the returned-to context, so this is
now an unreconciled state. restore_math is called in this state, and
that can be ftraced, and the ftrace subsystem disables local irqs.

Mark restore_math and its callees as notrace. Restore a sanity check
in the soft irq code that had to be disabled for this case, by commit
4da1f79227ad4 ("powerpc/64: Disable irq restore warning for now").

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In commit 2bf1071a8d50 ("powerpc/64s: Remove POWER9 DD1 support") the
function __switch_to remove usage for 'dummy_copy_buffer'. Since it is
not used anywhere else, remove it completely.

This remove the following warning:
  arch/powerpc/kernel/process.c:1156:17: error: 'dummy_copy_buffer' defined but not used

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge our topic branch shared with KVM. In particular this includes the
rewrite of the idle code into C.

This adds a flag so that the DAWR can be enabled on P9 via:
  echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous

The DAWR was previously force disabled on POWER9 in:
  9654153158 powerpc: Disable DAWR in the base POWER9 CPU features
Also see Documentation/powerpc/DAWR-POWER9.txt

This is a dangerous setting, USE AT YOUR OWN RISK.

Some users may not care about a bad user crashing their box
(ie. single user/desktop systems) and really want the DAWR.  This
allows them to force enable DAWR.

This flag can also be used to disable DAWR access. Once this is
cleared, all DAWR access should be cleared immediately and your
machine once again safe from crashing.

Userspace may get confused by toggling this. If DAWR is force
enabled/disabled between getting the number of breakpoints (via
PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
inconsistent view of what's available. Similarly for guests.

For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
enabled in the host AND the guest. For this reason, this won't work on
POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.

To double check the DAWR is working, run this kernel selftest:
  tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
Any errors/failures/skips mean something is wrong.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add radix_enabled() check to avoid SLB preload with radix translation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>