linux.git/arch/powerpc/kernel/mce.c, branch v5.14

Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2021-07-02T19:54:34+00:00

Pull powerpc updates from Michael Ellerman:

 - A big series refactoring parts of our KVM code, and converting some
   to C.

 - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
   some CPUs.

 - Support for the Microwatt soft-core.

 - Optimisations to our interrupt return path on 64-bit.

 - Support for userspace access to the NX GZIP accelerator on PowerVM on
   Power10.

 - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.

 - Other smaller features, fixes & cleanups.

Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.

* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
  powerpc: Only build restart_table.c for 64s
  powerpc/64s: move ret_from_fork etc above __end_soft_masked
  powerpc/64s/interrupt: clean up interrupt return labels
  powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
  powerpc/64: enable MSR[EE] in irq replay pt_regs
  powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
  powerpc/64s: add a table of implicit soft-masked addresses
  powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
  powerpc/64e: fix CONFIG_RELOCATABLE build warnings
  powerpc/64s: fix hash page fault interrupt handler
  powerpc/4xx: Fix setup_kuep() on SMP
  powerpc/32s: Fix setup_{kuap/kuep}() on SMP
  powerpc/interrupt: Use names in check_return_regs_valid()
  powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
  powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
  powerpc/ptrace: Refactor regs_set_return_{msr/ip}
  powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
  powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
  powerpc/pseries/vas: Include irqdomain.h
  powerpc: mark local variables around longjmp as volatile
  ...

powerpc/64s: avoid reloading (H)SRR registers if they are still valid

2021-06-24T14:06:55+00:00

When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime, or the return
address or MSR are modified, there is no need to reload these registers
when returning from interrupt.

Introduce per-CPU flags that track the validity of SRR and HSRR
registers. These are cleared when returning from interrupt, when
using the registers for something else (e.g., OPAL calls), when
adjusting the return address or MSR of a context, and when context
switching (which changes the return address and MSR).

This improves the performance of interrupt returns.

Signed-off-by: Nicholas Piggin 
[mpe: Fold in fixup patch from Nick]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com

powerpc: Add missing linux/{of.h,irqdomain.h} include directives

2021-06-10T12:09:16+00:00

A bunch of PPC files are missing the inclusion of linux/of.h and
linux/irqdomain.h, relying on transitive inclusion from another
file.

As we are about to break this dependency, make sure these dependencies
are explicit.

Signed-off-by: Marc Zyngier

powerpc/mce: save ignore_event flag unconditionally for UE

2021-04-21T12:52:32+00:00

When we hit an UE while using machine check safe copy routines,
ignore_event flag is set and the event is ignored by mce handler,
And the flag is also saved for defered handling and printing of
mce event information, But as of now saving of this flag is done
on checking if the effective address is provided or physical address
is calculated, which is not right.

Save ignore_event flag regardless of whether the effective address is
provided or physical address is calculated.

Without this change following log is seen, when the event is to be
ignored.

[  512.971365] MCE: CPU1: machine check (Severe)  UE Load/Store [Recovered]
[  512.971509] MCE: CPU1: NIP: [c0000000000b67c0] memcpy+0x40/0x90
[  512.971655] MCE: CPU1: Initiator CPU
[  512.971739] MCE: CPU1: Unknown
[  512.972209] MCE: CPU1: machine check (Severe)  UE Load/Store [Recovered]
[  512.972334] MCE: CPU1: NIP: [c0000000000b6808] memcpy+0x88/0x90
[  512.972456] MCE: CPU1: Initiator CPU
[  512.972534] MCE: CPU1: Unknown

Signed-off-by: Ganesh Goudar 
Reviewed-by: Santosh Sivaraj 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210407045816.352276-1-ganeshgr@linux.ibm.com

powerpc/mce: Make symbol 'mce_ue_event_work' static

2021-04-14T13:04:13+00:00

The sparse tool complains as follows:

arch/powerpc/kernel/mce.c:43:1: warning:
 symbol 'mce_ue_event_work' was not declared. Should it be static?

This symbol is not used outside of mce.c, so this commit marks it
static.

Signed-off-by: Li Huafei 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210408035802.31853-1-lihuafei1@huawei.com

powerpc: move NMI entry/exit code into wrapper

2021-02-08T13:10:50+00:00

This moves the common NMI entry and exit code into the interrupt handler
wrappers.

This changes the behaviour of soft-NMI (watchdog) and HMI interrupts, and
also MCE interrupts on 64e, by adding missing parts of the NMI entry to
them.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210130130852.2952424-40-npiggin@gmail.com

powerpc: convert interrupt handlers to use wrappers

2021-02-08T13:02:12+00:00

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210130130852.2952424-29-npiggin@gmail.com

powerpc/mce: Remove per cpu variables from MCE handlers

2021-01-31T11:35:49+00:00

Access to per-cpu variables requires translation to be enabled on
pseries machine running in hash mmu mode, Since part of MCE handler
runs in realmode and part of MCE handling code is shared between ppc
architectures pseries and powernv, it becomes difficult to manage
these variables differently on different architectures, So have
these variables in paca instead of having them as per-cpu variables
to avoid complications.

Signed-off-by: Ganesh Goudar 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210128104143.70668-2-ganeshgr@linux.ibm.com

powerpc/mce: Include prototypes

2021-01-30T00:39:29+00:00

It fixes these W=1 compile errors :

../arch/powerpc/kernel/mce.c:591:14: error: no previous prototype for ‘machine_check_early’ [-Werror=missing-prototypes]
  591 | long notrace machine_check_early(struct pt_regs *regs)
      |              ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/mce.c:725:6: error: no previous prototype for ‘hmi_exception_realmode’ [-Werror=missing-prototypes]
  725 | long hmi_exception_realmode(struct pt_regs *regs)
      |      ^~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Cédric Le Goater 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210104143206.695198-8-clg@kaod.org

powerpc/64s: Remove "Host" from MCE logging

2020-12-03T14:01:23+00:00

"Host" caused machine check is printed when the kernel sees a MCE
hit in this kernel or userspace, and "Guest" if it hit one of its
guests. This is confusing when a guest kernel handles a hypervisor-
delivered MCE, it also prints "Host".

Just remove "Host". "Guest" is adequate to make the distinction.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20201128070728.825934-8-npiggin@gmail.com