linux.git/arch/powerpc/kernel/entry_64.S, branch v4.16

Merge branch 'fixes' into next

2018-01-21T12:21:14+00:00

Merge our fixes branch from the 4.15 cycle.

Unusually the fixes branch saw some significant features merged,
notably the RFI flush patches, so we want the code in next to be
tested against that, to avoid any surprises when the two are merged.

There's also some other work on the panic handling that was reverted
in fixes and we now want to do properly in next, which would conflict.

And we also fix a few other minor merge conflicts.

powerpc: Add new kconfig CONFIG_PPC_IRQ_SOFT_MASK_DEBUG

2018-01-19T11:37:03+00:00

New Kconfig is added "CONFIG_PPC_IRQ_SOFT_MASK_DEBUG" to add WARN_ON
to alert the invalid transitions. Also moved the code under the
CONFIG_TRACE_IRQFLAGS in arch_local_irq_restore() to new Kconfig.

Reviewed-by: Nicholas Piggin 
Signed-off-by: Madhavan Srinivasan 
[mpe: Fix name of CONFIG option in change log]
Signed-off-by: Michael Ellerman

powerpc/64s: Add support to mask perf interrupts and replay them

2018-01-19T11:37:02+00:00

Two new bit mask field "IRQ_DISABLE_MASK_PMU" is introduced to support
the masking of PMI and "IRQ_DISABLE_MASK_ALL" to aid interrupt masking
checking.

Couple of new irq #defs "PACA_IRQ_PMI" and "SOFTEN_VALUE_0xf0*" added
to use in the exception code to check for PMI interrupts.

In the masked_interrupt handler, for PMIs we reset the MSR[EE] and
return. In the __check_irq_replay(), replay the PMI interrupt by
calling performance_monitor_common handler.

Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman

powerpc/64: Rename soft_enabled to irq_soft_mask

2018-01-19T11:37:01+00:00

Rename the paca->soft_enabled to paca->irq_soft_mask as it is no
longer used as a flag for interrupt state, but a mask.

Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman

powerpc/64: Change soft_enabled from flag to bitmask

2018-01-19T11:37:00+00:00

"paca->soft_enabled" is used as a flag to mask some of interrupts.
Currently supported flags values and their details:

soft_enabled    MSR[EE]

0               0       Disabled (PMI and HMI not masked)
1               1       Enabled

"paca->soft_enabled" is initialized to 1 to make the interripts as
enabled. arch_local_irq_disable() will toggle the value when
interrupts needs to disbled. At this point, the interrupts are not
actually disabled, instead, interrupt vector has code to check for the
flag and mask it when it occurs. By "mask it", it update interrupt
paca->irq_happened and return. arch_local_irq_restore() is called to
re-enable interrupts, which checks and replays interrupts if any
occured.

Now, as mentioned, current logic doesnot mask "performance monitoring
interrupts" and PMIs are implemented as NMI. But this patchset depends
on local_irq_* for a successful local_* update. Meaning, mask all
possible interrupts during local_* update and replay them after the
update.

So the idea here is to reserve the "paca->soft_enabled" logic. New
values and details:

soft_enabled    MSR[EE]

1               0       Disabled  (PMI and HMI not masked)
0               1       Enabled

Reason for the this change is to create foundation for a third mask
value "0x2" for "soft_enabled" to add support to mask PMIs. When
->soft_enabled is set to a value "3", PMI interrupts are mask and when
set to a value of "1", PMI are not mask. With this patch also extends
soft_enabled as interrupt disable mask.

Current flags are renamed from IRQ_[EN?DIS}ABLED to
IRQS_ENABLED and IRQS_DISABLED.

Patch also fixes the ptrace call to force the user to see the softe
value to be alway 1. Reason being, even though userspace has no
business knowing about softe, it is part of pt_regs. Like-wise in
signal context.

Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman

powerpc/64: Add #defines for paca->soft_enabled flags

2018-01-19T11:36:56+00:00

Two #defines IRQS_ENABLED and IRQS_DISABLED are added to be used when
updating paca->soft_enabled. Replace the hardcoded values used when
updating paca->soft_enabled with IRQ_(EN|DIS)ABLED #define. No logic
change.

Reviewed-by: Nicholas Piggin 
Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman

powerpc/64: rtas avoid accessing paca in 32-bit mode

2018-01-17T13:42:58+00:00

Commit 177ba7c647f3 ("powerpc/mm/radix: Limit paca allocation in radix")
limited the paca allocation address to 1G on pSeries because RTAS return
accesses the paca in 32-bit mode:

    On return from RTAS we access the paca variables and we have 64 bit
    disabled. This requires us to limit paca in 32 bit range.

    Fix this by setting ppc64_rma_size to first_memblock_size/1G range.

Avoid this limit by switching to 64-bit mode before accessing any memory.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL

2018-01-09T16:07:32+00:00

Similar to the syscall return path, in fast_exception_return we may be
returning to user or kernel context. We already have a test for that,
because we conditionally restore r13. So use that existing test and
branch, and bifurcate the return based on that.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL

2018-01-09T16:07:31+00:00

In the syscall exit path we may be returning to user or kernel
context. We already have a test for that, because we conditionally
restore r13. So use that existing test and branch, and bifurcate the
return based on that.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc/64s: Simple RFI macro conversions

2018-01-09T16:07:30+00:00

This commit does simple conversions of rfi/rfid to the new macros that
include the expected destination context. By simple we mean cases
where there is a single well known destination context, and it's
simply a matter of substituting the instruction for the appropriate
macro.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman