Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Larger virtual address space on 64-bit server CPUs. By default we
     use a 128TB virtual address space, but a process can request access
     to the full 512TB by passing a hint to mmap().

   - Support for the new Power9 "XIVE" interrupt controller.

   - TLB flushing optimisations for the radix MMU on Power9.

   - Support for CAPI cards on Power9, using the "Coherent Accelerator
     Interface Architecture 2.0".

   - The ability to configure the mmap randomisation limits at build and
     runtime.

   - Several small fixes and cleanups to the kprobes code, as well as
     support for KPROBES_ON_FTRACE.

   - Major improvements to handling of system reset interrupts,
     correctly treating them as NMIs, giving them a dedicated stack and
     using a new hypervisor call to trigger them, all of which should
     aid debugging and robustness.

   - Many fixes and other minor enhancements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
  Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
  Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
  Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
  Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
  Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
  Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
  Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
  R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
  Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
  Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
  Yang Shi"

* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
  powerpc/powernv: Fix TCE kill on NVLink2
  powerpc/mm/radix: Drop support for CPUs without lockless tlbie
  powerpc/book3s/mce: Move add_taint() later in virtual mode
  powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
  powerpc/smp: Document irq enable/disable after migrating IRQs
  powerpc/mpc52xx: Don't select user-visible RTAS_PROC
  powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
  powerpc/eeh: Clean up and document event handling functions
  powerpc/eeh: Avoid use after free in eeh_handle_special_event()
  cxl: Mask slice error interrupts after first occurrence
  cxl: Route eeh events to all drivers in cxl_pci_error_detected()
  cxl: Force context lock during EEH flow
  powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
  powerpc/xmon: Teach xmon oops about radix vectors
  powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
  powerpc/pseries: Enable VFIO
  powerpc/powernv: Fix iommu table size calculation hook for small tables
  powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
  powerpc: Add arch/powerpc/tools directory
  ...

entry_*.S now includes a lot more than just kernel entry/exit code. As a
first step at cleaning this up, let's split out the ftrace bits into
separate files. Also move all related tracing code into a new trace/
subdirectory.

No functional changes.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Although most of these kprobes patches are powerpc specific, there's a couple
that touch generic code (with Acks). At the moment there's one conflict with
acme's tree, but it's not too bad. Still just in case some other conflicts show
up, we've put these in a topic branch so another tree could merge some or all of
it if necessary.

Pass the real LR to the ftrace handler. This is needed for KPROBES_ON_FTRACE for
the pre handlers.

Also, with KPROBES_ON_FTRACE, the link register may be updated by the pre
handlers or by a registed kretprobe. Honor updated LR by restoring it from
pt_regs, rather than from the stack save area.

Live patch and function graph continue to work fine with this change.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Move the stack setup and teardown code into ftrace_graph_caller(). This way, we
don't incur the cost of setting it up unless function graph is enabled for this
function.

Also, remove the extraneous LR restore code after the function graph stub. LR
has previously been restored and neither livepatch_handler() nor
ftrace_graph_caller() return back here.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Drop bad change to non-mprofile-kernel version of ftrace_graph_caller]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel
OOPS:

  Bad kernel stack pointer cd93c840 at c000000000009868
  Oops: Bad kernel stack pointer, sig: 6 [#1]
  ...
  GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840
  ...
  NIP [c000000000009868] resume_kernel+0x2c/0x58
  LR [c000000000006208] program_check_common+0x108/0x180

On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does
not emulate actual store in emulate_step() because it may corrupt the exception
frame. So the kernel does the actual store operation in exception return code
i.e. resume_kernel().

resume_kernel() loads the saved stack pointer from memory using lwz, which only
loads the low 32-bits of the address, causing the kernel crash.

Fix this by loading the 64-bit value instead.

Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
[mpe: Change log massage, add stable tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull kbuild updates from Michal Marek:

 - EXPORT_SYMBOL for asm source by Al Viro.

   This does bring a regression, because genksyms no longer generates
   checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is
   working on a patch to fix this.

   Plus, we are talking about functions like strcpy(), which rarely
   change prototypes.

 - Fixes for PPC fallout of the above by Stephen Rothwell and Nick
   Piggin

 - fixdep speedup by Alexey Dobriyan.

 - preparatory work by Nick Piggin to allow architectures to build with
   -ffunction-sections, -fdata-sections and --gc-sections

 - CONFIG_THIN_ARCHIVES support by Stephen Rothwell

 - fix for filenames with colons in the initramfs source by me.

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits)
  initramfs: Escape colons in depfile
  ppc: there is no clear_pages to export
  powerpc/64: whitelist unresolved modversions CRCs
  kbuild: -ffunction-sections fix for archs with conflicting sections
  kbuild: add arch specific post-link Makefile
  kbuild: allow archs to select link dead code/data elimination
  kbuild: allow architectures to use thin archives instead of ld -r
  kbuild: Regenerate genksyms lexer
  kbuild: genksyms fix for typeof handling
  fixdep: faster CONFIG_ search
  ia64: move exports to definitions
  sparc32: debride memcpy.S a bit
  [sparc] unify 32bit and 64bit string.h
  sparc: move exports to definitions
  ppc: move exports to definitions
  arm: move exports to definitions
  s390: move exports to definitions
  m68k: move exports to definitions
  alpha: move exports to actual definitions
  x86: move exports to actual definitions
  ...

mtmsrd with L=1 only affects MSR_EE and MSR_RI bits, and we always
know what state those bits are, so the kernel MSR does not need to be
loaded when modifying them.

mtmsrd is often in the critical execution path, so avoiding dependency
on even L1 load is noticable. On a POWER8 this saves about 3 cycles
from the syscall path, and possibly a few from other exception returns
(not measured).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

tabort_syscall runs with RI=1, so a nested recoverable machine
check will load the paca into r13 and overwrite what we loaded
it with, because exceptions returning to privileged mode do not
restore r13.

Fixes: b4b56f9ecab4 (powerpc/tm: Abort syscalls in active transactions)
Cc: stable@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>