linux.git/arch/powerpc/kernel/entry_32.S, branch v5.6

powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S

2020-02-18T23:35:22+00:00

Fixes: 12c3f1fd87bf ("powerpc/32s: get rid of CPU_FTR_601 feature")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/a99fc0ad65b87a1ba51cfa3e0e9034ee294c3e07.1582034961.git.christophe.leroy@c-s.fr

powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK

2020-02-18T10:31:11+00:00

With CONFIG_VMAP_STACK, data MMU has to be enabled
to read data on the stack.

Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/d2330584f8c42d3039896e2b56f5d39676dc919c.1581669558.git.christophe.leroy@c-s.fr

powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK

2020-02-08T10:49:06+00:00

When CONFIG_PROVE_LOCKING is selected together with (now default)
CONFIG_VMAP_STACK, kernel enter deadlock during boot.

At the point of checking whether interrupts are enabled or not, the
value of MSR saved on stack is read using the physical address of the
stack. But at this point, when using VMAP stack the DATA MMU
translation has already been re-enabled, leading to deadlock.

Don't use the physical address of the stack when
CONFIG_VMAP_STACK is set.

Signed-off-by: Christophe Leroy 
Reported-by: Guenter Roeck 
Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK")
Tested-by: Guenter Roeck 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr

Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-02-04T13:06:46+00:00

Pull powerpc updates from Michael Ellerman:
 "A pretty small batch for us, and apologies for it being a bit late, I
  wanted to sneak Christophe's user_access_begin() series in.

  Summary:

   - Implement user_access_begin() and friends for our platforms that
     support controlling kernel access to userspace.

   - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.

   - Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
     virtual machines) to use the IOMMU.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
     VDSO, and some other improvements.

   - A series to use the PCI hotplug framework to control opencapi
     card's so that they can be reset and re-read after flashing a new
     FPGA image.

  As well as other minor fixes and improvements as usual.

  Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
  Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
  Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
  Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
  Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
  Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
  Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
  Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
  Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"

* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
  powerpc: configs: Cleanup old Kconfig options
  powerpc/configs/skiroot: Enable some more hardening options
  powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
  powerpc/configs/skiroot: Enable security features
  powerpc/configs/skiroot: Update for symbol movement only
  powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
  powerpc/configs/skiroot: Drop HID_LOGITECH
  powerpc/configs: Drop NET_VENDOR_HP which moved to staging
  powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
  powerpc/configs: Drop CONFIG_QLGE which moved to staging
  powerpc: Do not consider weak unresolved symbol relocations as bad
  powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
  powerpc: indent to improve Kconfig readability
  powerpc: Provide initial documentation for PAPR hcalls
  powerpc: Implement user_access_save() and user_access_restore()
  powerpc: Implement user_access_begin and friends
  powerpc/32s: Prepare prevent_user_access() for user_access_end()
  powerpc/32s: Drop NULL addr verification
  powerpc/kuap: Fix set direction in allow/prevent_user_access()
  powerpc/32s: Fix bad_kuap_fault()
  ...

powerpc/32s: Fix CPU wake-up from sleep mode

2020-01-28T12:01:19+00:00

Commit f7354ccac844 ("powerpc/32: Remove CURRENT_THREAD_INFO and
rename TI_CPU") broke the CPU wake-up from sleep mode (i.e. when
_TLF_SLEEPING is set) by delaying the tovirt(r2, r2).

This is because r2 is not restored by fast_exception_return. It used
to work (by chance ?) because CPU wake-up interrupt never comes from
user, so r2 is expected to point to 'current' on return.

Commit e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access
Protection") broke it even more by clobbering r0 which is not
restored by fast_exception_return either.

Use r6 instead of r0. This is possible because r3-r6 are restored by
fast_exception_return and only r3-r5 are used for exception arguments.

For r2 it could be converted back to virtual address, but stay on the
safe side and restore it from the stack instead. It should be live
in the cache at that moment, so loading from the stack should make
no difference compared to converting it from phys to virt.

Fixes: f7354ccac844 ("powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU")
Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/6d02c3ae6ad77af34392e98117e44c2bf6d13ba1.1580121710.git.christophe.leroy@c-s.fr

powerpc/32s: Enable CONFIG_VMAP_STACK

2020-01-27T11:37:24+00:00

A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.

Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().

Signed-off-by: Christophe Leroy 
[mpe: Fix tovirt_vmstack call in head_32.S to fix CHRP build]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/2e2509a242fd5f3e23df4a06530c18060c4d321e.1576916812.git.christophe.leroy@c-s.fr

powerpc/32: Add early stack overflow detection with VMAP stack.

2020-01-27T11:35:49+00:00

To avoid recursive faults, stack overflow detection has to be
performed before writing in the stack in exception prologs.

Do it by checking the alignment. If the stack pointer alignment is
wrong, it means it is pointing to the following or preceding page.

Without VMAP stack, a stack overflow is catastrophic. With VMAP
stack, a stack overflow isn't destructive, so don't panic. Kill
the task with SIGSEGV instead.

A dedicated overflow stack is set up for each CPU.

  lkdtm: Performing direct entry EXHAUST_STACK
  lkdtm: Calling function with 512 frame size to depth 32 ...
  lkdtm: loop 32/32 ...
  lkdtm: loop 31/32 ...
  lkdtm: loop 30/32 ...
  lkdtm: loop 29/32 ...
  lkdtm: loop 28/32 ...
  lkdtm: loop 27/32 ...
  lkdtm: loop 26/32 ...
  lkdtm: loop 25/32 ...
  lkdtm: loop 24/32 ...
  lkdtm: loop 23/32 ...
  lkdtm: loop 22/32 ...
  lkdtm: loop 21/32 ...
  lkdtm: loop 20/32 ...
  Kernel stack overflow in process test[359], r1=c900c008
  Oops: Kernel stack overflow, sig: 6 [#1]
  BE PAGE_SIZE=4K MMU=Hash PowerMac
  Modules linked in:
  CPU: 0 PID: 359 Comm: test Not tainted 5.3.0-rc7+ #2225
  NIP:  c0622060 LR: c0626710 CTR: 00000000
  REGS: c0895f48 TRAP: 0000   Not tainted  (5.3.0-rc7+)
  MSR:  00001032   CR: 28004224  XER: 00000000
  GPR00: c0626ca4 c900c008 c783c000 c07335cc c900c010 c07335cc c900c0f0 c07335cc
  GPR08: c900c0f0 00000001 00000000 00000000 28008222 00000000 00000000 00000000
  GPR16: 00000000 00000000 10010128 10010000 b799c245 10010158 c07335cc 00000025
  GPR24: c0690000 c08b91d4 c068f688 00000020 c900c0f0 c068f668 c08b95b4 c08b91d4
  NIP [c0622060] format_decode+0x0/0x4d4
  LR [c0626710] vsnprintf+0x80/0x5fc
  Call Trace:
  [c900c068] [c0626ca4] vscnprintf+0x18/0x48
  [c900c078] [c007b944] vprintk_store+0x40/0x214
  [c900c0b8] [c007bf50] vprintk_emit+0x90/0x1dc
  [c900c0e8] [c007c5cc] printk+0x50/0x60
  [c900c128] [c03da5b0] recursive_loop+0x44/0x6c
  [c900c338] [c03da5c4] recursive_loop+0x58/0x6c
  [c900c548] [c03da5c4] recursive_loop+0x58/0x6c
  [c900c758] [c03da5c4] recursive_loop+0x58/0x6c
  [c900c968] [c03da5c4] recursive_loop+0x58/0x6c
  [c900cb78] [c03da5c4] recursive_loop+0x58/0x6c
  [c900cd88] [c03da5c4] recursive_loop+0x58/0x6c
  [c900cf98] [c03da5c4] recursive_loop+0x58/0x6c
  [c900d1a8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900d3b8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900d5c8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900d7d8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900d9e8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900dbf8] [c03da5c4] recursive_loop+0x58/0x6c
  [c900de08] [c03da67c] lkdtm_EXHAUST_STACK+0x30/0x4c
  [c900de18] [c03da3e8] direct_entry+0xc8/0x140
  [c900de48] [c029fb40] full_proxy_write+0x64/0xcc
  [c900de68] [c01500f8] __vfs_write+0x30/0x1d0
  [c900dee8] [c0152cb8] vfs_write+0xb8/0x1d4
  [c900df08] [c0152f7c] ksys_write+0x58/0xe8
  [c900df38] [c0014208] ret_from_syscall+0x0/0x34
  --- interrupt: c01 at 0xf806664
      LR = 0x1000c868
  Instruction dump:
  4bffff91 80010014 7c832378 7c0803a6 38210010 4e800020 3d20c08a 3ca0c089
  8089a0cc 38a58f0c 38600001 4ba2d494 <9421ffe0> 7c0802a6 bfc10018 7c9f2378

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/1b89c121b4070c7ee99e4f22cc178f15a736b07b.1576916812.git.christophe.leroy@c-s.fr

powerpc/32: prepare for CONFIG_VMAP_STACK

2020-01-26T11:15:09+00:00

To support CONFIG_VMAP_STACK, the kernel has to activate Data MMU
Translation for accessing the stack. Before doing that it must save
SRR0, SRR1 and also DAR and DSISR when relevant, in order to not
loose them in case there is a Data TLB Miss once the translation is
reactivated.

This patch adds fields in thread struct for saving those registers.
It prepares entry_32.S to handle exception entry with
Data MMU Translation enabled and alters EXCEPTION_PROLOG macros to
save SRR0, SRR1, DAR and DSISR then reenables Data MMU.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/a775a1fea60f190e0f63503463fb775310a2009b.1576916812.git.christophe.leroy@c-s.fr

powerpc/32: save DEAR/DAR before calling handle_page_fault

2020-01-26T11:15:09+00:00

handle_page_fault() is the only function that save DAR/DEAR itself.

Save DAR/DEAR before calling handle_page_fault() to prepare for
VMAP stack which will require to save even before.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/3a4d58d378091086f00fde42b59610c80289e120.1576916812.git.christophe.leroy@c-s.fr

powerpc/32: replace MTMSRD() by mtmsr

2020-01-26T11:15:08+00:00

On PPC32, MTMSRD() is simply defined as mtmsr.

Replace MTMSRD(reg) by mtmsr reg in files dedicated to PPC32,
this makes the code less obscure.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/22469e78230edea3dbd0c79a555d73124f6c6d93.1576916812.git.christophe.leroy@c-s.fr