linux.git/arch/powerpc/kernel/eeh.c, branch v4.18

Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2018-06-07T17:23:33+00:00

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for split PMD page table lock on 64-bit Book3S (Power8/9).

   - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
     live patching again.

   - Add support for patching barrier_nospec in copy_from_user() and
     syscall entry.

   - A couple of fixes for our data breakpoints on Book3S.

   - A series from Nick optimising TLB/mm handling with the Radix MMU.

   - Numerous small cleanups to squash sparse/gcc warnings from Mathieu
     Malaterre.

   - Several series optimising various parts of the 32-bit code from
     Christophe Leroy.

   - Removal of support for two old machines, "SBC834xE" and "C2K"
     ("GEFanuc,C2K"), which is why the diffstat has so many deletions.

  And many other small improvements & fixes.

  There's a few out-of-area changes. Some minor ftrace changes OK'ed by
  Steve, and a fix to our powernv cpuidle driver. Then there's a series
  touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
  around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
  been in next for several weeks.

  Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
  Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
  Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
  Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
  Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
  Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
  Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
  Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
  Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
  Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
  Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
  Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"

* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
  powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
  cpuidle: powernv: Fix promotion from snooze if next state disabled
  powerpc: fix build failure by disabling attribute-alias warning in pci_32
  ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
  powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
  powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
  powerpc/pkeys: Detach execute_only key on !PROT_EXEC
  powerpc/powernv: copy/paste - Mask SO bit in CR
  powerpc: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove support for Marvell mv64x60 i2c controller
  powerpc/boot: Remove support for Marvell MPSC serial controller
  powerpc/embedded6xx: Remove C2K board support
  powerpc/lib: optimise PPC32 memcmp
  powerpc/lib: optimise 32 bits __clear_user()
  powerpc/time: inline arch_vtime_task_switch()
  powerpc/Makefile: set -mcpu=860 flag for the 8xx
  powerpc: Implement csum_ipv6_magic in assembly
  powerpc/32: Optimise __csum_partial()
  powerpc/lib: Adjust .balign inside string functions for PPC32
  ...

powerpc/eeh: Add message when PE processing at parent

2018-06-03T10:43:39+00:00

To aid debugging, add a message to show when EEH processing for a PE
will be done at the device's parent, rather than directly at the
device.

Signed-off-by: Sam Bobroff 
Signed-off-by: Michael Ellerman

powerpc/eeh: Strengthen types of eeh traversal functions

2018-06-03T10:43:38+00:00

The traversal functions eeh_pe_traverse() and eeh_pe_dev_traverse()
both provide their first argument as void * but every single user casts
it to the expected type.

Change the type of the first parameter from void * to the appropriate
type, and clean up all uses.

Signed-off-by: Sam Bobroff 
Signed-off-by: Michael Ellerman

proc: introduce proc_create_single{,_data}

2018-05-16T05:23:35+00:00

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig

powerpc/eeh: Add eeh_state_active() helper

2018-03-27T12:45:19+00:00

Checking for a "fully active" device state requires testing two flag
bits, which is open coded in several places, so add a function to do
it.

Signed-off-by: Sam Bobroff 
Reviewed-by: Alexey Kardashevskiy 
Signed-off-by: Michael Ellerman

Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-02-06T17:59:40+00:00

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...

powerpc/eeh: Update VF config space after EEH

2018-01-27T09:02:51+00:00

Add EEH platform operations for pseries to update VF config space.
With this change after EEH, the VF will have updated config space for
pseries platform.

Signed-off-by: Bryant G. Ly 
Signed-off-by: Juan J. Alvarez 
Acked-by: Russell Currey 
Signed-off-by: Michael Ellerman

powerpc/powernv: Rework EEH initialization on powernv

2017-09-26T01:19:07+00:00

Remove the post_init callback which is only used
by powernv, we can just call it explicitly from
the powernv code.

This partially kills the ability to "disable" eeh at
runtime via debugfs as this was calling that same
callback again, but this is both unused and broken
in several ways. If we want to revive it, we need
to create a dedicated enable/disable callback on the
backend that does the right thing.

Let the bulk of eeh initialize normally at
core_initcall() like it does on pseries by removing
the hack in eeh_init() that delays it.

Instead we make sure our eeh->probe cleanly bails
out of the PEs haven't been created yet and we force
a re-probe where we used to call eeh_init() again.

Signed-off-by: Benjamin Herrenschmidt 
Acked-by: Russell Currey 
Signed-off-by: Michael Ellerman

powerpc/eeh: Create PHB PEs after EEH is initialized

2017-09-21T04:56:00+00:00

Otherwise we end up not yet having computed the right diag data size
on powernv where EEH initialization is delayed, thus causing memory
corruption later on when calling OPAL.

Fixes: 5cb1f8fdddb7 ("powerpc/powernv/pci: Dynamically allocate PHB diag data")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Benjamin Herrenschmidt 
Acked-by: Russell Currey 
Signed-off-by: Michael Ellerman

powerpc/eeh: Reduce use of pci_dn::node

2017-08-31T04:26:10+00:00

The pci_dn struct caches a OF device node pointer in order to access
the "ibm,loc-code" property when EEH is recovering.

However, when this happens in eeh_dev_check_failure(), we also have
a pci_dev pointer which should have a valid pointer to the device node
when pci_dn has one (both pointers are not NULL for physical functions
and are NULL for virtual functions).

This changes pci_remove_device_node_info() to look for a parent of
the node being removed, just like pci_add_device_node_info() does when it
references the parent node.

This is the first step to get rid of pci_dn::node.

Signed-off-by: Alexey Kardashevskiy 
Signed-off-by: Michael Ellerman