This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status
& Control Register).

Also harmonise TAR (Target Address Register) FSCR bit definition too.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Since kmp takes 2 unsigned long args there should be a compat wrapper.
Since one isn't provided I think it's safer just to hook this up to not
implemented.  If we need it later we can do it properly then.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The BITOP_LE_SWIZZLE macro was used in the little-endian bitops functions
for powerpc.  But these functions were converted to generic bitops and
the BITOP_LE_SWIZZLE is not used anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull signal/compat fixes from Al Viro:
 "Fixes for several regressions introduced in the last signal.git pile,
  along with fixing bugs in truncate and ftruncate compat (on just about
  anything biarch at least one of those two had been done wrong)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  compat: restore timerfd settime and gettime compat syscalls
  [regression] braino in "sparc: convert to ksignal"
  fix compat truncate/ftruncate
  switch lseek to COMPAT_SYSCALL_DEFINE
  lseek() and truncate() on sparc really need sign extension

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull KVM updates from Marcelo Tosatti:
 "KVM updates for the 3.9 merge window, including x86 real mode
  emulation fixes, stronger memory slot interface restrictions, mmu_lock
  spinlock hold time reduction, improved handling of large page faults
  on shadow, initial APICv HW acceleration support, s390 channel IO
  based virtio, amongst others"

* tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
  Revert "KVM: MMU: lazily drop large spte"
  x86: pvclock kvm: align allocation size to page size
  KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr
  x86 emulator: fix parity calculation for AAD instruction
  KVM: PPC: BookE: Handle alignment interrupts
  booke: Added DBCR4 SPR number
  KVM: PPC: booke: Allow multiple exception types
  KVM: PPC: booke: use vcpu reference from thread_struct
  KVM: Remove user_alloc from struct kvm_memory_slot
  KVM: VMX: disable apicv by default
  KVM: s390: Fix handling of iscs.
  KVM: MMU: cleanup __direct_map
  KVM: MMU: remove pt_access in mmu_set_spte
  KVM: MMU: cleanup mapping-level
  KVM: MMU: lazily drop large spte
  KVM: VMX: cleanup vmx_set_cr0().
  KVM: VMX: add missing exit names to VMX_EXIT_REASONS array
  KVM: VMX: disable SMEP feature when guest is in non-paging mode
  KVM: Remove duplicate text in api.txt
  Revert "KVM: MMU: split kvm_mmu_free_page"
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull signal handling cleanups from Al Viro:
 "This is the first pile; another one will come a bit later and will
  contain SYSCALL_DEFINE-related patches.

   - a bunch of signal-related syscalls (both native and compat)
     unified.

   - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE
     (fixing several potential problems with missing argument
     validation, while we are at it)

   - a lot of now-pointless wrappers killed

   - a couple of architectures (cris and hexagon) forgot to save
     altstack settings into sigframe, even though they used the
     (uninitialized) values in sigreturn; fixed.

   - microblaze fixes for delivery of multiple signals arriving at once

   - saner set of helpers for signal delivery introduced, several
     architectures switched to using those."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits)
  x86: convert to ksignal
  sparc: convert to ksignal
  arm: switch to struct ksignal * passing
  alpha: pass k_sigaction and siginfo_t using ksignal pointer
  burying unused conditionals
  make do_sigaltstack() static
  arm64: switch to generic old sigaction() (compat-only)
  arm64: switch to generic compat rt_sigaction()
  arm64: switch compat to generic old sigsuspend
  arm64: switch to generic compat rt_sigqueueinfo()
  arm64: switch to generic compat rt_sigpending()
  arm64: switch to generic compat rt_sigprocmask()
  arm64: switch to generic sigaltstack
  sparc: switch to generic old sigsuspend
  sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE
  sparc: kill sign-extending wrappers for native syscalls
  kill sparc32_open()
  sparc: switch to use of generic old sigaction
  sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE
  mips: switch to generic sys_fork() and sys_clone()
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...