linux.git/arch/powerpc/include/asm/processor.h, branch v3.17

arch, locking: Ciao arch_mutex_cpu_relax()

2014-07-17T10:32:47+00:00

The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.

Signed-off-by: Davidlohr Bueso 
Signed-off-by: Peter Zijlstra 
Cc: Andrew Morton 
Cc: Anton Blanchard 
Cc: Aurelien Jacquiot 
Cc: Benjamin Herrenschmidt 
Cc: Bharat Bhushan 
Cc: Catalin Marinas 
Cc: Chen Liqin 
Cc: Chris Metcalf 
Cc: Christian Borntraeger 
Cc: Chris Zankel 
Cc: David Howells 
Cc: David S. Miller 
Cc: Deepthi Dharwar 
Cc: Dominik Dingel 
Cc: Fenghua Yu 
Cc: Geert Uytterhoeven 
Cc: Guan Xuetao 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Hirokazu Takata 
Cc: Ivan Kokshaysky 
Cc: James E.J. Bottomley 
Cc: James Hogan 
Cc: Jason Wang 
Cc: Jesper Nilsson 
Cc: Joe Perches 
Cc: Jonas Bonn 
Cc: Joseph Myers 
Cc: Kees Cook 
Cc: Koichi Yasutake 
Cc: Lennox Wu 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Neuling 
Cc: Michal Simek 
Cc: Mikael Starvik 
Cc: Nicolas Pitre 
Cc: Paolo Bonzini 
Cc: Paul Burton 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Paul Mackerras 
Cc: Qais Yousef 
Cc: Qiaowei Ren 
Cc: Rafael Wysocki 
Cc: Ralf Baechle 
Cc: Richard Henderson 
Cc: Richard Kuo 
Cc: Russell King 
Cc: Steven Miao 
Cc: Steven Rostedt 
Cc: Stratos Karafotis 
Cc: Tim Chen 
Cc: Tony Luck 
Cc: Vasily Kulikov 
Cc: Vineet Gupta 
Cc: Vineet Gupta 
Cc: Waiman Long 
Cc: Will Deacon 
Cc: Wolfram Sang 
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar

powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()

2014-05-28T03:35:35+00:00

To support split core we need to be able to force all secondaries into
nap, so the core can detect they are idle and do an unsplit.

Currently power7_nap() will return without napping if there is an irq
pending. We want to ignore the pending irq and nap anyway, we will deal
with the interrupt later.

Signed-off-by: Michael Ellerman 
Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt

powerpc/powernv: Add context management for Fast Sleep

2014-03-05T04:56:31+00:00

Before adding Fast-Sleep into the cpuidle framework, some low level
support needs to be added to enable it. This includes saving and
restoring of certain registers at entry and exit time of this state
respectively just like we do in the NAP idle state.

Signed-off-by: Vaidyanathan Srinivasan 
[Changelog modified by Preeti U. Murthy ]
Signed-off-by: Preeti U. Murthy 
Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries/cpuidle: smt-snooze-delay cleanup.

2014-01-29T06:02:24+00:00

smt-snooze-delay was designed to disable NAP state or delay the entry
to the NAP state prior to adoption of cpuidle framework. This
is per-cpu variable. With the coming of CPUIDLE framework,
states can be disabled on per-cpu basis using the cpuidle/enable
sysfs entry.

Also, with the coming of cpuidle driver each state's target residency
is per-driver unlike earlier which was per-device. Therefore,
the per-cpu sysfs smt-snooze-delay which decides the target residency
of the idle state on a particular cpu causes more confusion to the user
as we cannot have different smt-snooze-delay (target residency)
values for each cpu.

In the current code, smt-snooze-delay functionality is completely broken.
It makes sense to remove smt-snooze-delay from idle driver with the
coming of cpuidle framework.
However, sysfs files are retained as ppc64_util currently
utilises it. Once we fix ppc64_util, propose to clean
up the kernel code.

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.

2014-01-29T06:02:22+00:00

Move the file from arch specific pseries/processor_idle.c
to drivers/cpuidle/cpuidle-pseries.c
Make the relevant Makefile and Kconfig changes.
Also, introduce Kconfig.powerpc in drivers/cpuidle
for all powerpc cpuidle drivers.

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

Merge remote-tracking branch 'scott/next' into next

2014-01-15T03:22:35+00:00

Freescale updates from Scott:

<<
Highlights include 32-bit booke relocatable support, e6500 hardware
tablewalk support, various e500 SPE fixes, some new/revived boards, and
e6500 deeper idle and altivec powerdown modes.
>>

powerpc: Don't corrupt transactional state when using FP/VMX in kernel

2014-01-15T02:59:11+00:00

Currently, when we have a process using the transactional memory
facilities on POWER8 (that is, the processor is in transactional
or suspended state), and the process enters the kernel and the
kernel then uses the floating-point or vector (VMX/Altivec) facility,
we end up corrupting the user-visible FP/VMX/VSX state.  This
happens, for example, if a page fault causes a copy-on-write
operation, because the copy_page function will use VMX to do the
copy on POWER8.  The test program below demonstrates the bug.

The bug happens because when FP/VMX state for a transactional process
is stored in the thread_struct, we store the checkpointed state in
.fp_state/.vr_state and the transactional (current) state in
.transact_fp/.transact_vr.  However, when the kernel wants to use
FP/VMX, it calls enable_kernel_fp() or enable_kernel_altivec(),
which saves the current state in .fp_state/.vr_state.  Furthermore,
when we return to the user process we return with FP/VMX/VSX
disabled.  The next time the process uses FP/VMX/VSX, we don't know
which set of state (the current register values, .fp_state/.vr_state,
or .transact_fp/.transact_vr) we should be using, since we have no
way to tell if we are still in the same transaction, and if not,
whether the previous transaction succeeded or failed.

Thus it is necessary to strictly adhere to the rule that if FP has
been enabled at any point in a transaction, we must keep FP enabled
for the user process with the current transactional state in the
FP registers, until we detect that it is no longer in a transaction.
Similarly for VMX; once enabled it must stay enabled until the
process is no longer transactional.

In order to keep this rule, we add a new thread_info flag which we
test when returning from the kernel to userspace, called TIF_RESTORE_TM.
This flag indicates that there is FP/VMX/VSX state to be restored
before entering userspace, and when it is set the .tm_orig_msr field
in the thread_struct indicates what state needs to be restored.
The restoration is done by restore_tm_state().  The TIF_RESTORE_TM
bit is set by new giveup_fpu/altivec_maybe_transactional helpers,
which are called from enable_kernel_fp/altivec, giveup_vsx, and
flush_fp/altivec_to_thread instead of giveup_fpu/altivec.

The other thing to be done is to get the transactional FP/VMX/VSX
state from .fp_state/.vr_state when doing reclaim, if that state
has been saved there by giveup_fpu/altivec_maybe_transactional.
Having done this, we set the FP/VMX bit in the thread's MSR after
reclaim to indicate that that part of the state is now valid
(having been reclaimed from the processor's checkpointed state).

Finally, in the signal handling code, we move the clearing of the
transactional state bits in the thread's MSR a bit earlier, before
calling flush_fp_to_thread(), so that we don't unnecessarily set
the TIF_RESTORE_TM bit.

This is the test program:

/* Michael Neuling 4/12/2013
 *
 * See if the altivec state is leaked out of an aborted transaction due to
 * kernel vmx copy loops.
 *
 *   gcc -m64 htm_vmxcopy.c -o htm_vmxcopy
 *
 */

/* We don't use all of these, but for reference: */

int main(int argc, char *argv[])
{
	long double vecin = 1.3;
	long double vecout;
	unsigned long pgsize = getpagesize();
	int i;
	int fd;
	int size = pgsize*16;
	char tmpfile[] = "/tmp/page_faultXXXXXX";
	char buf[pgsize];
	char *a;
	uint64_t aborted = 0;

	fd = mkstemp(tmpfile);
	assert(fd >= 0);

	memset(buf, 0, pgsize);
	for (i = 0; i < size; i += pgsize)
		assert(write(fd, buf, pgsize) == pgsize);

	unlink(tmpfile);

	a = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
	assert(a != MAP_FAILED);

	asm __volatile__(
		"lxvd2x 40,0,%[vecinptr] ; " // set 40 to initial value
		TBEGIN
		"beq	3f ;"
		TSUSPEND
		"xxlxor 40,40,40 ; " // set 40 to 0
		"std	5, 0(%[map]) ;" // cause kernel vmx copy page
		TABORT
		TRESUME
		TEND
		"li	%[res], 0 ;"
		"b	5f ;"
		"3: ;" // Abort handler
		"li	%[res], 1 ;"
		"5: ;"
		"stxvd2x 40,0,%[vecoutptr] ; "
		: [res]"=r"(aborted)
		: [vecinptr]"r"(&vecin),
		  [vecoutptr]"r"(&vecout),
		  [map]"r"(a)
		: "memory", "r0", "r3", "r4", "r5", "r6", "r7");

	if (aborted && (vecin != vecout)){
		printf("FAILED: vector state leaked on abort %f != %f\n",
		       (double)vecin, (double)vecout);
		exit(1);
	}

	munmap(a, size);

	close(fd);

	printf("PASSED!\n");
	return 0;
}

Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc: fix exception clearing in e500 SPE float emulation

2014-01-08T00:32:21+00:00

The e500 SPE floating-point emulation code clears existing exceptions
(__FPU_FPSCR &= ~FP_EX_MASK;) before ORing in the exceptions from the
emulated operation.  However, these exception bits are the "sticky",
cumulative exception bits, and should only be cleared by the user
program setting SPEFSCR, not implicitly by any floating-point
instruction (whether executed purely by the hardware or emulated).
The spurious clearing of these bits shows up as missing exceptions in
glibc testing.

Fixing this, however, is not as simple as just not clearing the bits,
because while the bits may be from previous floating-point operations
(in which case they should not be cleared), the processor can also set
the sticky bits itself before the interrupt for an exception occurs,
and this can happen in cases when IEEE 754 semantics are that the
sticky bit should not be set.  Specifically, the "invalid" sticky bit
is set in various cases with non-finite operands, where IEEE 754
semantics do not involve raising such an exception, and the
"underflow" sticky bit is set in cases of exact underflow, whereas
IEEE 754 semantics are that this flag is set only for inexact
underflow.  Thus, for correct emulation the kernel needs to know the
setting of these two sticky bits before the instruction being
emulated.

When a floating-point operation raises an exception, the kernel can
note the state of the sticky bits immediately afterwards.  Some
 functions that affect the state of these bits, such as
fesetenv and feholdexcept, need to use prctl with PR_GET_FPEXC and
PR_SET_FPEXC anyway, and so it is natural to record the state of those
bits during that call into the kernel and so avoid any need for a
separate call into the kernel to inform it of a change to those bits.
Thus, the interface I chose to use (in this patch and the glibc port)
is that one of those prctl calls must be made after any userspace
change to those sticky bits, other than through a floating-point
operation that traps into the kernel anyway.  feclearexcept and
fesetexceptflag duly make those calls, which would not be required
were it not for this issue.

The previous EGLIBC port, and the uClibc code copied from it, is
fundamentally broken as regards any use of prctl for floating-point
exceptions because it didn't use the PR_FP_EXC_SW_ENABLE bit in its
prctl calls (and did various worse things, such as passing a pointer
when prctl expected an integer).  If you avoid anything where prctl is
used, the clearing of sticky bits still means it will never give
anything approximating correct exception semantics with existing
kernels.  I don't believe the patch makes things any worse for
existing code that doesn't try to inform the kernel of changes to
sticky bits - such code may get incorrect exceptions in some cases,
but it would have done so anyway in other cases.

Signed-off-by: Joseph Myers 
Signed-off-by: Scott Wood

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2013-11-15T04:51:36+00:00

Pull KVM changes from Paolo Bonzini:
 "Here are the 3.13 KVM changes.  There was a lot of work on the PPC
  side: the HV and emulation flavors can now coexist in a single kernel
  is probably the most interesting change from a user point of view.

  On the x86 side there are nested virtualization improvements and a few
  bugfixes.

  ARM got transparent huge page support, improved overcommit, and
  support for big endian guests.

  Finally, there is a new interface to connect KVM with VFIO.  This
  helps with devices that use NoSnoop PCI transactions, letting the
  driver in the guest execute WBINVD instructions.  This includes some
  nVidia cards on Windows, that fail to start without these patches and
  the corresponding userspace changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
  kvm, vmx: Fix lazy FPU on nested guest
  arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
  arm/arm64: KVM: MMIO support for BE guest
  kvm, cpuid: Fix sparse warning
  kvm: Delete prototype for non-existent function kvm_check_iopl
  kvm: Delete prototype for non-existent function complete_pio
  hung_task: add method to reset detector
  pvclock: detect watchdog reset at pvclock read
  kvm: optimize out smp_mb after srcu_read_unlock
  srcu: API for barrier after srcu read unlock
  KVM: remove vm mmap method
  KVM: IOMMU: hva align mapping page size
  KVM: x86: trace cpuid emulation when called from emulator
  KVM: emulator: cleanup decode_register_operand() a bit
  KVM: emulator: check rex prefix inside decode_register()
  KVM: x86: fix emulation of "movzbl %bpl, %eax"
  kvm_host: typo fix
  KVM: x86: emulate SAHF instruction
  MAINTAINERS: add tree for kvm.git
  Documentation/kvm: add a 00-INDEX file
  ...

Merge branch 'kvm-ppc-queue' of git://github.com/agraf/linux-2.6 into queue

2013-11-04T08:20:57+00:00

Conflicts:
	arch/powerpc/include/asm/processor.h