Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

    src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

  $(obj)     - directory in the object tree
  $(src)     - directory in the source tree  (changed by this commit)
  $(objtree) - the top of the kernel object tree
  $(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Fix typos, most reported by "codespell arch/powerpc".  Only touches
comments, no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240103231605.1801364-8-helgaas@kernel.org

Update the node name to be align with binding document.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-4-Frank.Li@nxp.com

Update dts to match dts binding document.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-3-Frank.Li@nxp.com

Due to the INTA is shared with the active-low PHY2 interrupt on
P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as
active-low, the P1010RDB-PB board is used separately, so configure
P1010RDB-PB's INTA with polarity as active-high.  The INTX in
P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup
to p1010rdb-pb.dts and p1010rdb-pb_36b.dts.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-2-Frank.Li@nxp.com

Enable Power Management feature on device tree, including MPC8536,
MPC8544, MPC8548, MPC8572, P1010, P1020, P1021, P1022, P2020, P2041,
P3041, T104X, T1024.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-1-Frank.Li@nxp.com

Fix the kernel-doc annotation for the 'skip' parameter in the
partial_decompress() function by adding a missing underscore and colon.

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408083916.123369-1-yang.lee@linux.alibaba.com

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

simple_realloc() frees the original buffer (ptr) even if the
reallocation failed.

Fix it to behave like standard realloc() and only free the original
buffer if the reallocation succeeded.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au