DT law_trgt_if property defines Local Access Window Target Interface.

Local Access Window Target Interface is used for identifying individual
peripheral and mapping its memory to CPU. Interface id is defined by
hardware itself.

U-Boot uses law_trgt_if DT property in PCIe nodes for configuring memory
mapping of individual PCIe controllers.

Linux kernel fsl_pci.c driver currently does not touch Local Access Window
and expects that U-Boot configures it properly.

Add law_trgt_if property to PCIe DT nodes for P2020. This allows usage of
kernel P2020 PCIe DT nodes in U-Boot. And therefore allows to share P2020
DTS files between Linux kernel and U-Boot.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504180822.29782-1-pali@kernel.org

CPLD firmware can reset board by writing value 0x01 at CPLD memory offset
0x0d. Define syscon-reboot node for this reset support.

Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713134429.18748-1-pali@kernel.org

CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core
PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board.
Hardware design is fully open source, all firmware and hardware design
files are available at Turris project website:

https://docs.turris.cz/hw/turris-1x/turris-1x/
https://project.turris.cz/en/hardware.html

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220624085550.20570-1-pali@kernel.org

Pull powerpc updates from Michael Ellerman:

 - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)

 - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)

 - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ

 - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later

 - Drop support for system call instruction emulation

 - Many other small features and fixes

Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.

* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
  powerpc/64: Include cache.h directly in paca.h
  powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
  powerpc/xics: Include missing header
  powerpc/powernv/pci: Drop VF MPS fixup
  powerpc/fsl_book3e: Don't set rodata RO too early
  powerpc/microwatt: Add mmu bits to device tree
  powerpc/powernv/flash: Check OPAL flash calls exist before using
  powerpc/powermac: constify device_node in of_irq_parse_oldworld()
  powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
  selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
  powerpc: Enable the DAWR on POWER9 DD2.3 and above
  powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
  powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
  powerpc: Fix all occurences of "the the"
  selftests/powerpc/pmu/ebb: remove fixed_instruction.S
  powerpc/platforms/83xx: Use of_device_get_match_data()
  powerpc/eeh: Drop redundant spinlock initialization
  powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
  powerpc/pseries/vas: Call misc_deregister if sysfs init fails
  powerpc/papr_scm: Fix leaking nvdimm_events_map elements
  ...

In commit 5402e239d09f ("powerpc/64s: Get LPID bit width from device
tree") the kernel tried to determine the pid and lpid bits from the
device tree. If they are not found, there is a fallback, but Microwatt
wasn't covered as it has the unusual configuration of being both !HV and
bare metal.

Set the values in the device tree to avoid having to add a special case.
The lpid value is the only one required, but add both for completeness.

Fixes: 5402e239d09f ("powerpc/64s: Get LPID bit width from device tree")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220519125706.593532-1-joel@jms.id.au

Rather than waiting for the bots to fix these one-by-one, fix all
occurences of "the the" throughout arch/powerpc.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au

P2020 also contains Power Management Controller and their registers at
offset 0xe0070 compatible with mpc8548. So add PMC node into DTS include
file fsl/p2020si-post.dtsi

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506203621.26314-1-pali@kernel.org

At the time being, we use CONFIG_CPU_LITTLE_ENDIAN and
CONFIG_CPU_BIG_ENDIAN to pass -mabi=elfv1 or elfv2 to
compiler, then define a PPC64_ELF_ABI_v1 or PPC64_ELF_ABI_v2
macro in asm/types.h based on _CALL_ELF define set by the compiler.

Make it more straight forward with a CONFIG option that
is directly usable.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1eca1addbc550167da9841c7340a010d0c4b2200.1652074503.git.christophe.leroy@csgroup.eu

Many architectures have similar install.sh scripts.

The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.

Factor out the generic part into scripts/install.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>

I think this hack is a bad idea. arch/powerpc/boot/Makefile is the
only and last user. Let's stop doing this.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)