linux.git/arch/powerpc/boot, branch v2.6.39

powerpc/85xx: Update dts for PCIe memory maps to match u-boot of Px020RDB

2011-04-04T14:30:40+00:00

PCIe memory address space is 1:1 mapped with u-boot.

Update dts of Px020RDB i.e. P1020RDB and P2020RDB to match the address map
changes in u-boot.

Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Kumar Gala

Merge remote branch 'jwb/next' into next

2011-03-17T06:59:01+00:00

powerpc/85xx: Update sata controller compatible for p1022ds board

2011-03-15T15:39:29+00:00

Update p1022 sata compatible to "fsl,p1022-sata", "fsl,pq-sata-v2".
p1022ds sata controller is v2 version comparing previous FSL sata
controller, for example, mpc8536.

Signed-off-by: Lei Xu 
Signed-off-by: Roy Zang 
Signed-off-by: Kumar Gala

powerpc/8xx: remove obsolete mgsuvd board

2011-03-15T15:11:27+00:00

The MPC852 based mgsuvd board from Keymile was initially ported,
but later on not developed further. This patch removes the respective
files to decrease merging conflicts and unneeded maintenance.

Signed-off-by: Holger Brunck 
Acked-by: Heiko Schocher
Cc: Vitaly Bordug 
Cc: Marcelo Tosatti 
Signed-off-by: Kumar Gala

powerpc/82xx: rename and update mgcoge board support

2011-03-15T15:06:37+00:00

The mgcoge board from keymile is now base for some other
similar boards. Therefore the board specific name mgcoge
was renamed to a generic name km82xx. Additionally some
enhancements were made:
	- rework partition table in dts file
	- add cpm2_pio_c gpio controller in dts file
	- update defconfig
	- add pin description for SCC1
	- add pin description and configuration for USB

Signed-off-by: Holger Brunck 
Acked-by: Heiko Schocher 
CC: Benjamin Herrenschmidt 
CC: Heiko Schocher 
Signed-off-by: Kumar Gala

powerpc/83xx: rename and update kmeter1

2011-03-15T15:06:37+00:00

Beside the MPC 8360 based board kmeter1 other km83xx boards
from keymile will follow. Therefore the board specific naming
kmeter1 for functions and files were replaced with km83xx.
Additionally some updates were made:
    - update defconfig for 2.6.38
    - rework flash partitioning in dts file
    - add gpio controller for qe_pio_c in dts

Signed-off-by: Holger Brunck 
Acked-by: Heiko Schocher 
CC: Benjamin Herrenschmidt 
CC: Heiko Schocher 
Signed-off-by: Kumar Gala

powerpc/44x: PHY fixup for USB on canyonlands board

2011-02-02T11:58:26+00:00

This fix is a reset for USB PHY that requires some amount of time for power
to be stable on Canyonlands.

Signed-off-by: Rupjyoti Sarmah 
Signed-off-by: Josh Boyer

powerpc/44x: Add USB DWC DTS entry to Canyonlands board

2011-02-02T11:57:51+00:00

Add Synopsys Designware DTS entry for 460EX based Canyonlands board.

Signed-off-by: Tirumala R Marri
Signed-off-by: Josh Boyer

powerpc/boot/dts: Install dts from the right directory

2011-01-21T03:08:38+00:00

The dts-installed variable is initialised using a wildcard path that
will be expanded relative to the build directory.  Use the existing
variable dtstree to generate an absolute wildcard path that will work
when building in a separate directory.

Reported-by: Gerhard Pircher 
Signed-off-by: Ben Hutchings 
Tested-by: Gerhard Pircher  [against 2.6.32]
Signed-off-by: Benjamin Herrenschmidt

Merge remote branch 'kumar/next' into merge

2011-01-21T00:00:44+00:00