linux.git/arch/powerpc/Makefile, branch v5.11

Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-12-17T21:34:25+00:00

Pull powerpc updates from Michael Ellerman:

 - Switch to the generic C VDSO, as well as some cleanups of our VDSO
   setup/handling code.

 - Support for KUAP (Kernel User Access Prevention) on systems using the
   hashed page table MMU, using memory protection keys.

 - Better handling of PowerVM SMT8 systems where all threads of a core
   do not share an L2, allowing the scheduler to make better scheduling
   decisions.

 - Further improvements to our machine check handling.

 - Show registers when unwinding interrupt frames during stack traces.

 - Improvements to our pseries (PowerVM) partition migration code.

 - Several series from Christophe refactoring and cleaning up various
   parts of the 32-bit code.

 - Other smaller features, fixes & cleanups.

Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.

* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
  powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
  powerpc: Add config fragment for disabling -Werror
  powerpc/configs: Add ppc64le_allnoconfig target
  powerpc/powernv: Rate limit opal-elog read failure message
  powerpc/pseries/memhotplug: Quieten some DLPAR operations
  powerpc/ps3: use dma_mapping_error()
  powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
  powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
  powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
  KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
  KVM: PPC: fix comparison to bool warning
  KVM: PPC: Book3S: Assign boolean values to a bool variable
  powerpc: Inline setup_kup()
  powerpc/64s: Mark the kuap/kuep functions non __init
  KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
  powerpc/xive: Improve error reporting of OPAL calls
  powerpc/xive: Simplify xive_do_source_eoi()
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
  ...

powerpc/configs: Add ppc64le_allnoconfig target

2020-12-15T11:53:27+00:00

Add a phony target for ppc64le_allnoconfig, which tests some
combinations of CONFIG symbols that aren't covered by any of our
defconfigs.

Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20201125031551.2112715-1-mpe@ellerman.id.au

Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-12-06T18:31:39+00:00

Pull Kbuild fixes from Masahiro Yamada:

 - Move -Wcast-align to W=3, which tends to be false-positive and there
   is no tree-wide solution.

 - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
   preprocessor option and makes sense for .S files as well.

 - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.

 - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.

 - Fix undesirable line breaks in *.mod files.

* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: avoid split lines in .mod files
  kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
  kbuild: Hoist '--orphan-handling' into Kconfig
  Kbuild: do not emit debug info for assembly with LLVM_IAS=1
  kbuild: use -fmacro-prefix-map for .S sources
  Makefile.extrawarn: move -Wcast-align to W=3

powerpc/vdso: Retrieve sigtramp offsets at buildtime

2020-12-03T14:01:17+00:00

This is copied from arm64.

Instead of using runtime generated signal trampoline offsets,
get offsets at buildtime.

If the said trampoline doesn't exist, build will fail. So no
need to check whether the trampoline exists or not in the VDSO.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/f8bfd6812c3e3678b1cdb4d55a52f9eb022b40d3.1601197618.git.christophe.leroy@csgroup.eu

powerpc/vdso: Stripped VDSO is not needed, don't build it

2020-12-03T14:01:15+00:00

Since commit 24b659a13866 ("powerpc: Use unstripped VDSO image for
more accurate profiling data"), only the unstripped VDSO image
has been used.

Partially revert commit 8150caad0226 ("[POWERPC] powerpc vDSO: install
unstripped copies on disk") to avoid building the stripped version.

And the unstripped version in $(MODLIB)/vdso/ is not required
anymore as it is the one embedded in the kernel image.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/5986ca25be44fe6e9790486304507f240077d8c4.1601197618.git.christophe.leroy@csgroup.eu

kbuild: Hoist '--orphan-handling' into Kconfig

2020-12-01T13:45:36+00:00

Currently, '--orphan-handling=warn' is spread out across four different
architectures in their respective Makefiles, which makes it a little
unruly to deal with in case it needs to be disabled for a specific
linker version (in this case, ld.lld 10.0.1).

To make it easier to control this, hoist this warning into Kconfig and
the main Makefile so that disabling it is simpler, as the warning will
only be enabled in a couple places (main Makefile and a couple of
compressed boot folders that blow away LDFLAGS_vmlinx) and making it
conditional is easier due to Kconfig syntax. One small additional
benefit of this is saving a call to ld-option on incremental builds
because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN.

To keep the list of supported architectures the same, introduce
CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to
gain this automatically after all of the sections are specified and size
asserted. A special thanks to Kees Cook for the help text on this
config.

Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Acked-by: Kees Cook 
Acked-by: Michael Ellerman  (powerpc)
Reviewed-by: Nick Desaulniers 
Tested-by: Nick Desaulniers 
Signed-off-by: Nathan Chancellor 
Signed-off-by: Masahiro Yamada

powerpc: Drop -me200 addition to build flags

2020-11-17T11:05:33+00:00

Currently a build with CONFIG_E200=y will fail with:

  Error: invalid switch -me200
  Error: unrecognized option -me200

Upstream binutils has never supported an -me200 option. Presumably it
was supported at some point by either a fork or Freescale internal
binutils.

We can't support code that we can't even build test, so drop the
addition of -me200 to the build flags, so we can at least build with
CONFIG_E200=y.

Reported-by: Németh Márton 
Reported-by: kernel test robot 
Signed-off-by: Michael Ellerman 
Reviewed-by: Nick Desaulniers 
Acked-by: Scott Wood 
Link: https://lore.kernel.org/r/20201116120913.165317-1-mpe@ellerman.id.au

Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-10-22T20:13:57+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...

powerpc/32s: Rename head_32.S to head_book3s_32.S

2020-10-08T10:17:14+00:00

Unlike PPC64 which had a single head_64.S, PPC32 are multiple ones.
There is the head_32.S, selected by default based on the value of BITS
and overridden based on some CONFIG_ values. This leads to thinking
that it may be selected by different types of PPC32 platform but
indeed it ends up being selected by book3s/32 only.

Make that explicit by:
- Not doing any default selection based on BITS.
- Renaming head_32.S to head_book3s_32.S.
- Get head_book3s_32.S selected only by CONFIG_PPC_BOOK3S_32.

Signed-off-by: Christophe Leroy 
[mpe: Fix head_$(BITS).o reference in arch/powerpc/Makefile]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/319d379f696412681c66a987cc75e6abf8f958d2.1601975100.git.christophe.leroy@csgroup.eu

kbuild: preprocess module linker script

2020-09-24T15:36:41+00:00

There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)

The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.

You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.

scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.

You can add arch-specific sections in .

Signed-off-by: Masahiro Yamada 
Tested-by: Jessica Yu 
Acked-by: Will Deacon 
Acked-by: Geert Uytterhoeven 
Acked-by: Palmer Dabbelt 
Reviewed-by: Kees Cook 
Acked-by: Jessica Yu