Pull parisc updates from Helge Deller:

 - The parisc kernel wrongly allows reading from read-protected
   userspace memory without faulting, e.g. when userspace uses
   mprotect() to read-protect a memory area and then uses a pointer to
   this memory in a write(2, addr, 1) syscall.

   To fix this issue, Dave Anglin developed a set of patches which use
   the proberi assembler instruction to additionally check read access
   permissions at runtime.

 - Randy Dunlap contributed two patches to fix a minor typo and to
   explain why a 32-bit compiler is needed although a 64-bit kernel is
   built

* tag 'parisc-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Revise __get_user() to probe user read access
  parisc: Revise gateway LWS calls to probe user read access
  parisc: Drop WARN_ON_ONCE() from flush_cache_vmap
  parisc: Try to fixup kernel exception in bad_area_nosemaphore path of do_page_fault()
  parisc: Define and use set_pte_at()
  parisc: Rename pte_needs_flush() to pte_needs_cache_flush() in cache.c
  parisc: Check region is readable by user in raw_copy_from_user()
  parisc: Update comments in make_insert_tlb
  parisc: Makefile: explain that 64BIT requires both 32-bit and 64-bit compilers
  parisc: Makefile: fix a typo in palo.conf

Pull ftrace updates from Steven Rostedt:

 - Keep track of when fgraph_ops are registered or not

   Keep accounting of when fgraph_ops are registered as if a fgraph_ops
   is registered twice it can mess up the accounting and it will not
   work as expected later. Trigger a warning if something registers it
   twice as to catch bugs before they are found by things just not
   working as expected.

 - Make DYNAMIC_FTRACE always enabled for architectures that support it

   As static ftrace (where all functions are always traced) is very
   expensive and only exists to help architectures support ftrace, do
   not make it an option. As soon as an architecture supports
   DYNAMIC_FTRACE make it use it. This simplifies the code.

 - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD

   The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
   DYNAMIC_FTRACE work, but now every architecture that implements
   DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
   redundant with the HAVE_DYNAMIC_FTRACE.

 - Make pid_ptr string size match the comment

   In print_graph_proc() the pid_ptr string is of size 11, but the
   comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.

* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
  ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
  fgraph: Keep track of when fgraph_ops are registered or not
  fgraph: Make pid_str size match the comment

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

Pull execve updates from Kees Cook:

 - Introduce regular REGSET note macros arch-wide (Dave Martin)

 - Remove arbitrary 4K limitation of program header size (Yin Fengwei)

 - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)

* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
  fork: reorder function qualifiers for copy_clone_args_from_user
  binfmt_elf: remove the 4k limitation of program header size
  binfmt_elf: Warn on missing or suspicious regset note names
  xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  ...

Pull fileattr updates from Christian Brauner:
 "This introduces the new file_getattr() and file_setattr() system calls
  after lengthy discussions.

  Both system calls serve as successors and extensible companions to
  the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
  started to show their age in addition to being named in a way that
  makes it easy to conflate them with extended attribute related
  operations.

  These syscalls allow userspace to set filesystem inode attributes on
  special files. One of the usage examples is the XFS quota projects.

  XFS has project quotas which could be attached to a directory. All new
  inodes in these directories inherit project ID set on parent
  directory.

  The project is created from userspace by opening and calling
  FS_IOC_FSSETXATTR on each inode. This is not possible for special
  files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
  with empty project ID. Those inodes then are not shown in the quota
  accounting but still exist in the directory. This is not critical but
  in the case when special files are created in the directory with
  already existing project quota, these new inodes inherit extended
  attributes. This creates a mix of special files with and without
  attributes. Moreover, special files with attributes don't have a
  possibility to become clear or change the attributes. This, in turn,
  prevents userspace from re-creating quota project on these existing
  files.

  In addition, these new system calls allow the implementation of
  additional attributes that we couldn't or didn't want to fit into the
  legacy ioctls anymore"

* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: tighten a sanity check in file_attr_to_fileattr()
  tree-wide: s/struct fileattr/struct file_kattr/g
  fs: introduce file_getattr and file_setattr syscalls
  fs: prepare for extending file_get/setattr()
  fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
  selinux: implement inode_file_[g|s]etattr hooks
  lsm: introduce new hooks for setting/getting inode fsxattr
  fs: split fileattr related helpers into separate file

Because of the way read access support is implemented, read access
interruptions are only triggered at privilege levels 2 and 3. The
kernel executes at privilege level 0, so __get_user() never triggers
a read access interruption (code 26). Thus, it is currently possible
for user code to access a read protected address via a system call.

Fix this by probing read access rights at privilege level 3 (PRIV_USER)
and setting __gu_err to -EFAULT (-14) if access isn't allowed.

Note the cmpiclr instruction does a 32-bit compare because COND macro
doesn't work inside asm.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+

We use load and stbys,e instructions to trigger memory reference
interruptions without writing to memory. Because of the way read
access support is implemented, read access interruptions are only
triggered at privilege levels 2 and 3. The kernel and gateway
page execute at privilege level 0, so this code never triggers
a read access interruption. Thus, it is currently possible for
user code to execute a LWS compare and swap operation at an
address that is read protected at privilege level 3 (PRIV_USER).

Fix this by probing read access rights at privilege level 3 and
branching to lws_fault if access isn't allowed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+

I have observed warning to occassionally trigger.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+

When a PTE is changed, we need to flush the PTE. set_pte_at()
was lost in the folio update. PA-RISC version is the same as
the generic version.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+