<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/arch/parisc, branch v4.8-rc2</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux</title>
<updated>2016-08-05T13:48:22+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-08-05T13:48:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6c84239d595dc6ffe39f0f03dae2f64ed200db95'/>
<id>6c84239d595dc6ffe39f0f03dae2f64ed200db95</id>
<content type='text'>
Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux</title>
<updated>2016-08-04T22:31:14+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-08-04T22:31:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b067c9045af4791a5836042f743d12477131f7b5'/>
<id>b067c9045af4791a5836042f743d12477131f7b5</id>
<content type='text'>
Pull parisc updates from Helge Deller:

 - added an optimized hash implementation for parisc (George Spelvin)

 - C99 style cleanups in iomap.c (Amitoj Kaur Chawla)

 - added breaks to switch statement in PDC function (noticed by Dan
   Carpenter)

* 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Change structure intialisation to C99 style in iomap.c
  parisc: Add break statements to pdc_pat_io_pci_cfg_read()
  parisc: Add &lt;asm/hash.h&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull parisc updates from Helge Deller:

 - added an optimized hash implementation for parisc (George Spelvin)

 - C99 style cleanups in iomap.c (Amitoj Kaur Chawla)

 - added breaks to switch statement in PDC function (noticed by Dan
   Carpenter)

* 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Change structure intialisation to C99 style in iomap.c
  parisc: Add break statements to pdc_pat_io_pci_cfg_read()
  parisc: Add &lt;asm/hash.h&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dma-mapping: use unsigned long for dma_attrs</title>
<updated>2016-08-04T12:50:07+00:00</updated>
<author>
<name>Krzysztof Kozlowski</name>
<email>k.kozlowski@samsung.com</email>
</author>
<published>2016-08-03T20:46:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=00085f1efa387a8ce100e3734920f7639c80caa3'/>
<id>00085f1efa387a8ce100e3734920f7639c80caa3</id>
<content type='text'>
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski &lt;k.kozlowski@samsung.com&gt;
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Acked-by: Robin Murphy &lt;robin.murphy@arm.com&gt;
Acked-by: Hans-Christian Noren Egtvedt &lt;egtvedt@samfundet.no&gt;
Acked-by: Mark Salter &lt;msalter@redhat.com&gt; [c6x]
Acked-by: Jesper Nilsson &lt;jesper.nilsson@axis.com&gt; [cris]
Acked-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt; [drm]
Reviewed-by: Bart Van Assche &lt;bart.vanassche@sandisk.com&gt;
Acked-by: Joerg Roedel &lt;jroedel@suse.de&gt; [iommu]
Acked-by: Fabien Dessenne &lt;fabien.dessenne@st.com&gt; [bdisp]
Reviewed-by: Marek Szyprowski &lt;m.szyprowski@samsung.com&gt; [vb2-core]
Acked-by: David Vrabel &lt;david.vrabel@citrix.com&gt; [xen]
Acked-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt; [xen swiotlb]
Acked-by: Joerg Roedel &lt;jroedel@suse.de&gt; [iommu]
Acked-by: Richard Kuo &lt;rkuo@codeaurora.org&gt; [hexagon]
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt; [m68k]
Acked-by: Gerald Schaefer &lt;gerald.schaefer@de.ibm.com&gt; [s390]
Acked-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Hans-Christian Noren Egtvedt &lt;egtvedt@samfundet.no&gt; [avr32]
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt; [arc]
Acked-by: Robin Murphy &lt;robin.murphy@arm.com&gt; [arm64 and dma-iommu]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski &lt;k.kozlowski@samsung.com&gt;
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Acked-by: Robin Murphy &lt;robin.murphy@arm.com&gt;
Acked-by: Hans-Christian Noren Egtvedt &lt;egtvedt@samfundet.no&gt;
Acked-by: Mark Salter &lt;msalter@redhat.com&gt; [c6x]
Acked-by: Jesper Nilsson &lt;jesper.nilsson@axis.com&gt; [cris]
Acked-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt; [drm]
Reviewed-by: Bart Van Assche &lt;bart.vanassche@sandisk.com&gt;
Acked-by: Joerg Roedel &lt;jroedel@suse.de&gt; [iommu]
Acked-by: Fabien Dessenne &lt;fabien.dessenne@st.com&gt; [bdisp]
Reviewed-by: Marek Szyprowski &lt;m.szyprowski@samsung.com&gt; [vb2-core]
Acked-by: David Vrabel &lt;david.vrabel@citrix.com&gt; [xen]
Acked-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt; [xen swiotlb]
Acked-by: Joerg Roedel &lt;jroedel@suse.de&gt; [iommu]
Acked-by: Richard Kuo &lt;rkuo@codeaurora.org&gt; [hexagon]
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt; [m68k]
Acked-by: Gerald Schaefer &lt;gerald.schaefer@de.ibm.com&gt; [s390]
Acked-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Hans-Christian Noren Egtvedt &lt;egtvedt@samfundet.no&gt; [avr32]
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt; [arc]
Acked-by: Robin Murphy &lt;robin.murphy@arm.com&gt; [arm64 and dma-iommu]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>parisc: Change structure intialisation to C99 style in iomap.c</title>
<updated>2016-08-02T14:44:34+00:00</updated>
<author>
<name>Amitoj Kaur Chawla</name>
<email>amitoj1606@gmail.com</email>
</author>
<published>2016-06-14T06:43:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a549c45a22de800e00045959b2d4f1b15b9f815a'/>
<id>a549c45a22de800e00045959b2d4f1b15b9f815a</id>
<content type='text'>
Replace the in order struct initialisation style with explicit field
style.

Signed-off-by: Amitoj Kaur Chawla &lt;amitoj1606@gmail.com&gt;
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Replace the in order struct initialisation style with explicit field
style.

Signed-off-by: Amitoj Kaur Chawla &lt;amitoj1606@gmail.com&gt;
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>parisc: Add break statements to pdc_pat_io_pci_cfg_read()</title>
<updated>2016-08-02T14:44:33+00:00</updated>
<author>
<name>Helge Deller</name>
<email>deller@gmx.de</email>
</author>
<published>2016-08-02T14:26:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=49ea1480f433d7673715f471c10f05bb08d49205'/>
<id>49ea1480f433d7673715f471c10f05bb08d49205</id>
<content type='text'>
Dan Carpenter noticed that pdc_pat_io_pci_cfg_read() is problematic
because it's missing some break statements so it copies 4 bytes
regardless of whether you asked for only 1 or 2.

Reported-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Dan Carpenter noticed that pdc_pat_io_pci_cfg_read() is problematic
because it's missing some break statements so it copies 4 bytes
regardless of whether you asked for only 1 or 2.

Reported-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>parisc: Add &lt;asm/hash.h&gt;</title>
<updated>2016-08-02T14:44:29+00:00</updated>
<author>
<name>George Spelvin</name>
<email>linux@sciencehorizons.net</email>
</author>
<published>2016-06-07T23:45:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=773e1c5fa4bf1faa25e119490b26ece2ef1bdb46'/>
<id>773e1c5fa4bf1faa25e119490b26ece2ef1bdb46</id>
<content type='text'>
PA-RISC is interesting; integer multiplies are implemented in the
FPU, so are painful in the kernel.  But it tries to be friendly to
shift-and-add sequences for constant multiplies.

__hash_32 is implemented using the same shift-and-add sequence as
Microblaze, just scheduled for the PA7100.  (It's 2-way superscalar
but in-order, like the Pentium.)

hash_64 was tricky, but a suggestion from Jason Thong allowed a
good solution by breaking up the multiplier.  After a lot of manual
optimization, I found a 19-instruction sequence for the multiply that
can be executed in 10 cycles using only 4 temporaries.

(The PA8xxx can issue 4 instructions per cycle, but 2 must be ALU ops
and 2 must be loads/stores.  And the final add can't be paired.)

An alternative considered, but ultimately not used, was Thomas Wang's
64-to-32-bit integer hash.  At 12 instructions, it's smaller, but they're
all sequentially dependent, so it has longer latency.

https://web.archive.org/web/2011/http://www.concentric.net/~Ttwang/tech/inthash.htm
http://burtleburtle.net/bob/hash/integer.html

Signed-off-by: George Spelvin &lt;linux@sciencehorizons.net&gt;
Cc: Helge Deller &lt;deller@gmx.de&gt;
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PA-RISC is interesting; integer multiplies are implemented in the
FPU, so are painful in the kernel.  But it tries to be friendly to
shift-and-add sequences for constant multiplies.

__hash_32 is implemented using the same shift-and-add sequence as
Microblaze, just scheduled for the PA7100.  (It's 2-way superscalar
but in-order, like the Pentium.)

hash_64 was tricky, but a suggestion from Jason Thong allowed a
good solution by breaking up the multiplier.  After a lot of manual
optimization, I found a 19-instruction sequence for the multiply that
can be executed in 10 cycles using only 4 temporaries.

(The PA8xxx can issue 4 instructions per cycle, but 2 must be ALU ops
and 2 must be loads/stores.  And the final add can't be paired.)

An alternative considered, but ultimately not used, was Thomas Wang's
64-to-32-bit integer hash.  At 12 instructions, it's smaller, but they're
all sequentially dependent, so it has longer latency.

https://web.archive.org/web/2011/http://www.concentric.net/~Ttwang/tech/inthash.htm
http://burtleburtle.net/bob/hash/integer.html

Signed-off-by: George Spelvin &lt;linux@sciencehorizons.net&gt;
Cc: Helge Deller &lt;deller@gmx.de&gt;
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller &lt;deller@gmx.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security</title>
<updated>2016-07-30T00:38:46+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-07-30T00:38:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7a1e8b80fb1e8ead4cec15d1fc494ed290e4d2e9'/>
<id>7a1e8b80fb1e8ead4cec15d1fc494ed290e4d2e9</id>
<content type='text'>
Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds</title>
<updated>2016-07-27T21:03:52+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-07-27T21:03:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=607e11ab6654e167b1b0ec132cedc73e220f63c6'/>
<id>607e11ab6654e167b1b0ec132cedc73e220f63c6</id>
<content type='text'>
Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - LED driver for TI LP3952 6-Channel Color LED

  LED core improvements:
   - Only descend into leds directory when CONFIG_NEW_LEDS is set
   - Add no-op gpio_led_register_device when LED subsystem is disabled
   - MAINTAINERS: Add file patterns for led device tree bindings

  LED Trigger core improvements:
   - return error if invalid trigger name is provided via sysfs

  LED class drivers improvements
   - is31fl32xx: define complete i2c_device_id table
   - is31fl32xx: fix typo in id and match table names
   - leds-gpio: Set of_node for created LED devices
   - pca9532: Add device tree support

  Conversion of IDE trigger to common disk trigger:
   - leds: convert IDE trigger to common disk trigger
   - leds: documentation: 'ide-disk' to 'disk-activity'
   - unicore32: use the new LED disk activity trigger
   - parisc: use the new LED disk activity trigger
   - mips: use the new LED disk activity trigger
   - arm: use the new LED disk activity trigger
   - powerpc: use the new LED disk activity trigger"

* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: is31fl32xx: define complete i2c_device_id table
  leds: is31fl32xx: fix typo in id and match table names
  leds: LED driver for TI LP3952 6-Channel Color LED
  leds: leds-gpio: Set of_node for created LED devices
  leds: triggers: return error if invalid trigger name is provided via sysfs
  leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
  leds: Add no-op gpio_led_register_device when LED subsystem is disabled
  unicore32: use the new LED disk activity trigger
  parisc: use the new LED disk activity trigger
  mips: use the new LED disk activity trigger
  arm: use the new LED disk activity trigger
  powerpc: use the new LED disk activity trigger
  leds: documentation: 'ide-disk' to 'disk-activity'
  leds: convert IDE trigger to common disk trigger
  leds: pca9532: Add device tree support
  MAINTAINERS: Add file patterns for led device tree bindings
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - LED driver for TI LP3952 6-Channel Color LED

  LED core improvements:
   - Only descend into leds directory when CONFIG_NEW_LEDS is set
   - Add no-op gpio_led_register_device when LED subsystem is disabled
   - MAINTAINERS: Add file patterns for led device tree bindings

  LED Trigger core improvements:
   - return error if invalid trigger name is provided via sysfs

  LED class drivers improvements
   - is31fl32xx: define complete i2c_device_id table
   - is31fl32xx: fix typo in id and match table names
   - leds-gpio: Set of_node for created LED devices
   - pca9532: Add device tree support

  Conversion of IDE trigger to common disk trigger:
   - leds: convert IDE trigger to common disk trigger
   - leds: documentation: 'ide-disk' to 'disk-activity'
   - unicore32: use the new LED disk activity trigger
   - parisc: use the new LED disk activity trigger
   - mips: use the new LED disk activity trigger
   - arm: use the new LED disk activity trigger
   - powerpc: use the new LED disk activity trigger"

* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: is31fl32xx: define complete i2c_device_id table
  leds: is31fl32xx: fix typo in id and match table names
  leds: LED driver for TI LP3952 6-Channel Color LED
  leds: leds-gpio: Set of_node for created LED devices
  leds: triggers: return error if invalid trigger name is provided via sysfs
  leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
  leds: Add no-op gpio_led_register_device when LED subsystem is disabled
  unicore32: use the new LED disk activity trigger
  parisc: use the new LED disk activity trigger
  mips: use the new LED disk activity trigger
  arm: use the new LED disk activity trigger
  powerpc: use the new LED disk activity trigger
  leds: documentation: 'ide-disk' to 'disk-activity'
  leds: convert IDE trigger to common disk trigger
  leds: pca9532: Add device tree support
  MAINTAINERS: Add file patterns for led device tree bindings
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: do not pass mm_struct into handle_mm_fault</title>
<updated>2016-07-26T23:19:19+00:00</updated>
<author>
<name>Kirill A. Shutemov</name>
<email>kirill.shutemov@linux.intel.com</email>
</author>
<published>2016-07-26T22:25:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=dcddffd41d3f1d3bdcc1dce3f1cd142779b6d4c1'/>
<id>dcddffd41d3f1d3bdcc1dce3f1cd142779b6d4c1</id>
<content type='text'>
We always have vma-&gt;vm_mm around.

Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov &lt;kirill.shutemov@linux.intel.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We always have vma-&gt;vm_mm around.

Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov &lt;kirill.shutemov@linux.intel.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2016-07-25T19:41:29+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-07-25T19:41:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c86ad14d305d2429c3da19462440bac50c183def'/>
<id>c86ad14d305d2429c3da19462440bac50c183def</id>
<content type='text'>
Pull locking updates from Ingo Molnar:
 "The locking tree was busier in this cycle than the usual pattern - a
  couple of major projects happened to coincide.

  The main changes are:

   - implement the atomic_fetch_{add,sub,and,or,xor}() API natively
     across all SMP architectures (Peter Zijlstra)

   - add atomic_fetch_{inc/dec}() as well, using the generic primitives
     (Davidlohr Bueso)

   - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
     Waiman Long)

   - optimize smp_cond_load_acquire() on arm64 and implement LSE based
     atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
     on arm64 (Will Deacon)

   - introduce smp_acquire__after_ctrl_dep() and fix various barrier
     mis-uses and bugs (Peter Zijlstra)

   - after discovering ancient spin_unlock_wait() barrier bugs in its
     implementation and usage, strengthen its semantics and update/fix
     usage sites (Peter Zijlstra)

   - optimize mutex_trylock() fastpath (Peter Zijlstra)

   - ... misc fixes and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
  locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
  locking/static_keys: Fix non static symbol Sparse warning
  locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
  locking/atomic, arch/tile: Fix tilepro build
  locking/atomic, arch/m68k: Remove comment
  locking/atomic, arch/arc: Fix build
  locking/Documentation: Clarify limited control-dependency scope
  locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
  locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
  locking/atomic, arch/mips: Convert to _relaxed atomics
  locking/atomic, arch/alpha: Convert to _relaxed atomics
  locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
  locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
  locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
  locking/atomic: Fix atomic64_relaxed() bits
  locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull locking updates from Ingo Molnar:
 "The locking tree was busier in this cycle than the usual pattern - a
  couple of major projects happened to coincide.

  The main changes are:

   - implement the atomic_fetch_{add,sub,and,or,xor}() API natively
     across all SMP architectures (Peter Zijlstra)

   - add atomic_fetch_{inc/dec}() as well, using the generic primitives
     (Davidlohr Bueso)

   - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
     Waiman Long)

   - optimize smp_cond_load_acquire() on arm64 and implement LSE based
     atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
     on arm64 (Will Deacon)

   - introduce smp_acquire__after_ctrl_dep() and fix various barrier
     mis-uses and bugs (Peter Zijlstra)

   - after discovering ancient spin_unlock_wait() barrier bugs in its
     implementation and usage, strengthen its semantics and update/fix
     usage sites (Peter Zijlstra)

   - optimize mutex_trylock() fastpath (Peter Zijlstra)

   - ... misc fixes and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
  locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
  locking/static_keys: Fix non static symbol Sparse warning
  locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
  locking/atomic, arch/tile: Fix tilepro build
  locking/atomic, arch/m68k: Remove comment
  locking/atomic, arch/arc: Fix build
  locking/Documentation: Clarify limited control-dependency scope
  locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
  locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
  locking/atomic, arch/mips: Convert to _relaxed atomics
  locking/atomic, arch/alpha: Convert to _relaxed atomics
  locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
  locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
  locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
  locking/atomic: Fix atomic64_relaxed() bits
  locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  ...
</pre>
</div>
</content>
</entry>
</feed>
