linux.git/arch/parisc, branch v4.15

parisc: qemu idle sleep support

2018-01-06T11:28:04+00:00

Add qemu idle sleep support when running under qemu with SeaBIOS PDC
firmware.

Like the power architecture we use the "or" assembler instructions,
which translate to nops on real hardware, to indicate that qemu shall
idle sleep.

Signed-off-by: Helge Deller 
Cc: Richard Henderson 
CC: stable@vger.kernel.org # v4.9+

parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel

2018-01-02T21:21:54+00:00

Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures
about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9."

Those opcodes evaluate to the ldcw() assembly instruction which requires
(on 32bit) an alignment of 16 bytes to ensure atomicity.

As it turns out, qemu is correct and in our assembly code in entry.S and
pacache.S we don't pay attention to the required alignment.

This patch fixes the problem by aligning the lock offset in assembly
code in the same manner as we do in our C-code.

Signed-off-by: Helge Deller 
Cc:  # v4.0+

parisc: Show initial kernel memory layout unhashed

2018-01-02T20:01:00+00:00

Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller

parisc: Show unhashed hardware inventory

2018-01-02T20:00:57+00:00

Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller

parisc: Reduce thread stack to 16 kb

2017-12-17T20:06:25+00:00

In testing, I found that the thread stack can be 16 kB when using an irq
stack.  Without it, the thread stack needs to be 32 kB. Currently, the irq
stack is 32 kB. While it probably could be 16 kB, I would prefer to leave it
as is for safety.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller

Revert "parisc: Re-enable interrupts early"

2017-12-17T20:06:25+00:00

This reverts commit 5c38602d83e584047906b41b162ababd4db4106d.

Interrupts can't be enabled early because the register saves are done on
the thread stack prior to switching to the IRQ stack.  This caused stack
overflows and the thread stack needed increasing to 32k.  Even then,
stack overflows still occasionally occurred.

Background:
Even with a 32 kB thread stack, I have seen instances where the thread
stack overflowed on the mx3210 buildd.  Detection of stack overflow only
occurs when we have an external interrupt.  When an external interrupt
occurs, we switch to the thread stack if we are not already on a kernel
stack.  Then, registers and specials are saved to the kernel stack.

The bug occurs in intr_return where interrupts are reenabled prior to
returning from the interrupt.  This was done incase we need to schedule
or deliver signals.  However, it introduces the possibility that
multiple external interrupts may occur on the thread stack and cause a
stack overflow.  These might not be detected and cause the kernel to
misbehave in random ways.

This patch changes the code back to only reenable interrupts when we are
going to schedule or deliver signals.  As a result, we generally return
from an interrupt before reenabling interrupts.  This minimizes the
growth of the thread stack.

Fixes: 5c38602d83e5 ("parisc: Re-enable interrupts early")
Signed-off-by: John David Anglin 
Cc:  # v4.10+
Signed-off-by: Helge Deller

parisc: remove duplicate includes

2017-12-17T20:06:25+00:00

These duplicate includes have been found with scripts/checkincludes.pl
but they have been removed manually to avoid removing false positives.

Signed-off-by: Pravin Shedge 
Signed-off-by: Helge Deller

parisc: Align os_hpmc_size on word boundary

2017-12-17T20:06:25+00:00

The os_hpmc_size variable sometimes wasn't aligned at word boundary and thus
triggered the unaligned fault handler at startup.
Fix it by aligning it properly.

Signed-off-by: Helge Deller 
Cc:  # v4.14+

parisc: Fix indenting in puts()

2017-12-17T20:06:25+00:00

Static analysis tools complain that we intended to have curly braces
around this indent block. In this case this assumption is wrong, so fix
the indenting.

Fixes: 2f3c7b8137ef ("parisc: Add core code for self-extracting kernel")
Reported-by: Dan Carpenter 
Signed-off-by: Helge Deller 
Cc:  # v4.14+

bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type

2017-12-05T14:02:40+00:00

Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter 
Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner 
Reviewed-and-tested-by: Thomas Richter 
Acked-by: Alexei Starovoitov 
Cc: Arnaldo Carvalho de Melo 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Arnd Bergmann 
Cc: Daniel Borkmann 
Signed-off-by: Daniel Borkmann