linux.git/arch/parisc/kernel/entry.S, branch v5.10

parisc: Fix comments and enable interrupts later

2020-10-15T06:10:38+00:00

Correct the comments: The jump is forwards, not backwards.
Enable the interrupts after %r29 (reference param area) was loaded.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller

parisc: Do not use an ordered store in pa_tlb_lock()

2020-07-28T17:29:38+00:00

No need to use an ordered store in pa_tlb_lock() and update the comment
regarng usage of the sid register to unlocak a spinlock in
tlb_unlock0().

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Cc:  # v5.0+

Revert "parisc: Use ldcw instruction for SMP spinlock release barrier"

2020-07-28T16:54:40+00:00

This reverts commit 9e5c602186a692a7e848c0da17aed40f49d30519.
No need to use the ldcw instruction as SMP spinlock release barrier.
Revert it to gain back speed again.

Signed-off-by: Helge Deller 
Cc:  # v5.2+

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

sched/rt, parisc: Use CONFIG_PREEMPTION

2019-12-08T13:37:34+00:00

CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.

Switch the entry code over to use CONFIG_PREEMPTION.

[bigeasy: +Kconfig]

Signed-off-by: Thomas Gleixner 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner 
Cc: Helge Deller 
Cc: James E.J. Bottomley 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: linux-parisc@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-16-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar

parisc: fix frame pointer in ftrace_regs_caller()

2019-10-30T20:24:40+00:00

The current code in ftrace_regs_caller() doesn't assign
%r3 to contain the address of the current frame. This
is hidden if the kernel is compiled with FRAME_POINTER,
but without it just crashes because it tries to dereference
an arbitrary address. Fix this by always setting %r3 to the
current stack frame.

Signed-off-by: Sven Schnelle 
Signed-off-by: Helge Deller

parisc/ftrace: Add KPROBES_ON_FTRACE

2019-08-03T06:56:57+00:00

Allow KPROBES to use the ftrace infrastructure on PA-RISC.

Signed-off-by: Sven Schnelle 
Signed-off-by: Helge Deller

parisc: Wire up clone3 syscall

2019-07-17T21:11:28+00:00

Signed-off-by: Helge Deller 
Tested-by: Sven Schnelle 
Acked-by: Christian Brauner

parisc: add dynamic ftrace

2019-06-08T10:56:29+00:00

This patch implements dynamic ftrace for PA-RISC. The required mcount
call sequences can get pretty long, so instead of patching the
whole call sequence out of the functions, we are using
-fpatchable-function-entry from gcc. This puts a configurable amount of
NOPS before/at the start of the function. Taking do_sys_open() as example,
which would look like this when the call is patched out:

1036b248:       08 00 02 40     nop
1036b24c:       08 00 02 40     nop
1036b250:       08 00 02 40     nop
1036b254:       08 00 02 40     nop

1036b258 :
1036b258:       08 00 02 40     nop
1036b25c:       08 03 02 41     copy r3,r1
1036b260:       6b c2 3f d9     stw rp,-14(sp)
1036b264:       08 1e 02 43     copy sp,r3
1036b268:       6f c1 01 00     stw,ma r1,80(sp)

When ftrace gets enabled for this function the kernel will patch these
NOPs to:

1036b248:       10 19 57 20     
1036b24c:       6f c1 00 80     stw,ma r1,40(sp)
1036b250:       48 21 3f d1     ldw -18(r1),r1
1036b254:       e8 20 c0 02     bv,n r0(r1)

1036b258 :
1036b258:       e8 3f 1f df     b,l,n .-c,r1
1036b25c:       08 03 02 41     copy r3,r1
1036b260:       6b c2 3f d9     stw rp,-14(sp)
1036b264:       08 1e 02 43     copy sp,r3
1036b268:       6f c1 01 00     stw,ma r1,80(sp)

So the first NOP in do_sys_open() will be patched to jump backwards into
some minimal trampoline code which pushes a stackframe, saves r1 which
holds the return address, loads the address of the real ftrace function,
and branches to that location. For 64 Bit things are getting a bit more
complicated (and longer) because we must make sure that the address of
ftrace location is 8 byte aligned, and the offset passed to ldd for
fetching the address is 8 byte aligned as well.

Note that gcc has a bug which misplaces the function label, and needs a
patch to make dynamic ftrace work. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90751 for details.

Signed-off-by: Sven Schnelle 
Signed-off-by: Helge Deller