Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.

The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.

The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:

force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.

This also makes it clear force_sig passes current into force_sig_info.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

A few architectures use <asm/segment.h> internally, but nothing in
common code does. Remove all the empty or almost empty versions of it,
including the asm-generic one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot
detection") I fixed delay slot detection, but only for QEMU.  We missed
that hardware delay slot detection using delay slot exception flag (DSX)
was still broken.  This was because QEMU set the DSX flag in both
pre-exception supervision register (ESR) and supervision register (SR)
register, but on real hardware the DSX flag is only set on the SR
register during exceptions.

Fix this by carrying the DSX flag into the SR register during exception.
We also update the DSX flag read locations to read the value from the SR
register not the pt_regs SR register which represents ESR.  The ESR
should never have the DSX flag set.

In the process I updated/removed a few comments to match the current
state.  Including removing a comment saying that the DSX detection logic
was inefficient and needed to be rewritten.

I have tested this on QEMU with a patch ensuring it matches the hardware
specification.

Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html
Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection")
Signed-off-by: Stafford Horne <shorne@gmail.com>

Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull printk updates from Petr Mladek:

 - Add a console_msg_format command line option:

     The value "default" keeps the old "[time stamp] text\n" format. The
     value "syslog" allows to see the syslog-like "<log
     level>[timestamp] text" format.

     This feature was requested by people doing regression tests, for
     example, 0day robot. They want to have both filtered and full logs
     at hands.

 - Reduce the risk of softlockup:

     Pass the console owner in a busy loop.

     This is a new approach to the old problem. It was first proposed by
     Steven Rostedt on Kernel Summit 2017. It marks a context in which
     the console_lock owner calls console drivers and could not sleep.
     On the other side, printk() callers could detect this state and use
     a busy wait instead of a simple console_trylock(). Finally, the
     console_lock owner checks if there is a busy waiter at the end of
     the special context and eventually passes the console_lock to the
     waiter.

     The hand-off works surprisingly well and helps in many situations.
     Well, there is still a possibility of the softlockup, for example,
     when the flood of messages stops and the last owner still has too
     much to flush.

     There is increasing number of people having problems with
     printk-related softlockups. We might eventually need to get better
     solution. Anyway, this looks like a good start and promising
     direction.

 - Do not allow to schedule in console_unlock() called from printk():

     This reverts an older controversial commit. The reschedule helped
     to avoid softlockups. But it also slowed down the console output.
     This patch is obsoleted by the new console waiter logic described
     above. In fact, the reschedule made the hand-off less effective.

 - Deprecate "%pf" and "%pF" format specifier:

     It was needed on ia64, ppc64 and parisc64 to dereference function
     descriptors and show the real function address. It is done
     transparently by "%ps" and "pS" format specifier now.

     Sergey Senozhatsky found that all the function descriptors were in
     a special elf section and could be easily detected.

 - Remove printk_symbol() API:

     It has been obsoleted by "%pS" format specifier, and this change
     helped to remove few continuous lines and a less intuitive old API.

 - Remove redundant memsets:

     Sergey removed unnecessary memset when processing printk.devkmsg
     command line option.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
  printk: drop redundant devkmsg_log_str memsets
  printk: Never set console_may_schedule in console_trylock()
  printk: Hide console waiter logic into helpers
  printk: Add console owner and waiter logic to load balance console writes
  kallsyms: remove print_symbol() function
  checkpatch: add pF/pf deprecation warning
  symbol lookup: introduce dereference_symbol_descriptor()
  parisc64: Add .opd based function descriptor dereference
  powerpc64: Add .opd based function descriptor dereference
  ia64: Add .opd based function descriptor dereference
  sections: split dereference_function_descriptor()
  openrisc: Fix conflicting types for _exext and _stext
  lib: do not use print_symbol()
  irq debug: do not use print_symbol()
  sysfs: do not use print_symbol()
  drivers: do not use print_symbol()
  x86: do not use print_symbol()
  unicore32: do not use print_symbol()
  sh: do not use print_symbol()
  mn10300: do not use print_symbol()
  ...

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Cc: stable@vger.kernel.org
Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>