linux.git/arch/openrisc/kernel/setup.c, branch v6.8

openrisc: Use common of_get_cpu_node() instead of open-coding

2023-04-01T05:40:27+00:00

The common of_get_cpu_node() is equivalent to setup_find_cpu_node(), so
use it instead.

Signed-off-by: Rob Herring 
Signed-off-by: Stafford Horne

openrisc: Fix compiler warnings in setup

2021-08-10T21:14:23+00:00

This was pointed out with the recent name change of or32_early_setup to
or1k_early_setup.  Investigating the file I found a few other warnings
so cleaning them up here.

    arch/openrisc/kernel/setup.c:220:13: warning: no previous prototype for 'or1k_early_setup' [-Wmissing-prototypes]
      220 | void __init or1k_early_setup(void *fdt)
	  |             ^~~~~~~~~~~~~~~~

Fix this the missing or1k_early_setup prototype warning by adding an
asm/setup.h file to define the prototype.

    arch/openrisc/kernel/setup.c:246:13: warning: no previous prototype for 'detect_unit_config' [-Wmissing-prototypes]
      246 | void __init detect_unit_config(unsigned long upr, unsigned long mask,
	  |             ^~~~~~~~~~~~~~~~~~

The function detect_unit_config is not used, just remove it.

    arch/openrisc/kernel/setup.c:221: warning: Function parameter or member 'fdt' not described in 'or1k_early_setup'

Add @fdt docs to the function comment to suppress this warning.

Reported-by: kernel test robot 
Signed-off-by: Stafford Horne 
Reviewed-by: Randy Dunlap

openrisc: rename or32 code & comments to or1k

2021-08-05T01:53:59+00:00

From Documentation/openrisc/todo.rst, rename "or32" in the
source code to "or1k" since this is the name that has been
settled on.

Signed-off-by: Randy Dunlap 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne

openrisc: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-11-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Stafford Horne 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

openrisc: Fix a memory leak

2021-04-28T12:40:44+00:00

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Stafford Horne

h8300, nds32, openrisc: simplify detection of memory extents

2020-10-14T01:38:35+00:00

Instead of traversing memblock.memory regions to find memory_start and
memory_end, simply query memblock_{start,end}_of_DRAM().

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Acked-by: Stafford Horne 
Cc: Andy Lutomirski 
Cc: Baoquan He 
Cc: Benjamin Herrenschmidt 
Cc: Borislav Petkov 
Cc: Catalin Marinas 
Cc: Christoph Hellwig 
Cc: Daniel Axtens 
Cc: Dave Hansen 
Cc: Emil Renner Berthing 
Cc: Hari Bathini 
Cc: Ingo Molnar 
Cc: Ingo Molnar 
Cc: Jonathan Cameron 
Cc: Marek Szyprowski 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Miguel Ojeda 
Cc: Palmer Dabbelt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Russell King 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.org
Signed-off-by: Linus Torvalds

openrisc: Reserve memblock for initrd

2020-09-07T12:01:46+00:00

Recently OpenRISC added support for external initrd images, but I found
some instability when using larger buildroot initrd images. It turned
out that I forgot to reserve the memblock space for the initrd image.

This patch fixes the instability issue by reserving memblock space.

Fixes: ff6c923dbec3 ("openrisc: Add support for external initrd images")
Signed-off-by: Stafford Horne 
Reviewed-by: Mike Rapoport

openrisc: Add support for external initrd images

2020-08-04T01:59:45+00:00

In OpenRISC we set the initrd_start and initrd_end based on the symbols
we setup in vmlinux.lds.S.  However, this is not needed if we use the
generic linker description in INIT_DATA_SECTION.

Removing our own initrd setup reduces code, but also the generic code
supports loading external initrd images.  A bootloader can load a rootfs
image into memory and we can configure devicetree to load it with:

        chosen {
                bootargs = "earlycon";
                stdout-path = "uart0:115200";
                linux,initrd-start = < 0x08000100 >;
                linux,initrd-end = < 0x08200000 >;
        };

Reported-by: Mateusz Holenko 
Signed-off-by: Stafford Horne

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

arch/openrisc/setup: Drop dummy_con initialization

2020-01-14T14:29:17+00:00

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar 
Link: https://lore.kernel.org/r/20191218214506.49252-16-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman