linux.git/arch/openrisc/kernel/setup.c, branch v6.0

openrisc: Fix compiler warnings in setup

2021-08-10T21:14:23+00:00

This was pointed out with the recent name change of or32_early_setup to
or1k_early_setup.  Investigating the file I found a few other warnings
so cleaning them up here.

    arch/openrisc/kernel/setup.c:220:13: warning: no previous prototype for 'or1k_early_setup' [-Wmissing-prototypes]
      220 | void __init or1k_early_setup(void *fdt)
	  |             ^~~~~~~~~~~~~~~~

Fix this the missing or1k_early_setup prototype warning by adding an
asm/setup.h file to define the prototype.

    arch/openrisc/kernel/setup.c:246:13: warning: no previous prototype for 'detect_unit_config' [-Wmissing-prototypes]
      246 | void __init detect_unit_config(unsigned long upr, unsigned long mask,
	  |             ^~~~~~~~~~~~~~~~~~

The function detect_unit_config is not used, just remove it.

    arch/openrisc/kernel/setup.c:221: warning: Function parameter or member 'fdt' not described in 'or1k_early_setup'

Add @fdt docs to the function comment to suppress this warning.

Reported-by: kernel test robot 
Signed-off-by: Stafford Horne 
Reviewed-by: Randy Dunlap

openrisc: rename or32 code & comments to or1k

2021-08-05T01:53:59+00:00

From Documentation/openrisc/todo.rst, rename "or32" in the
source code to "or1k" since this is the name that has been
settled on.

Signed-off-by: Randy Dunlap 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne

openrisc: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-11-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Stafford Horne 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

openrisc: Fix a memory leak

2021-04-28T12:40:44+00:00

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Stafford Horne

h8300, nds32, openrisc: simplify detection of memory extents

2020-10-14T01:38:35+00:00

Instead of traversing memblock.memory regions to find memory_start and
memory_end, simply query memblock_{start,end}_of_DRAM().

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Acked-by: Stafford Horne 
Cc: Andy Lutomirski 
Cc: Baoquan He 
Cc: Benjamin Herrenschmidt 
Cc: Borislav Petkov 
Cc: Catalin Marinas 
Cc: Christoph Hellwig 
Cc: Daniel Axtens 
Cc: Dave Hansen 
Cc: Emil Renner Berthing 
Cc: Hari Bathini 
Cc: Ingo Molnar 
Cc: Ingo Molnar 
Cc: Jonathan Cameron 
Cc: Marek Szyprowski 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Miguel Ojeda 
Cc: Palmer Dabbelt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Russell King 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.org
Signed-off-by: Linus Torvalds

openrisc: Reserve memblock for initrd

2020-09-07T12:01:46+00:00

Recently OpenRISC added support for external initrd images, but I found
some instability when using larger buildroot initrd images. It turned
out that I forgot to reserve the memblock space for the initrd image.

This patch fixes the instability issue by reserving memblock space.

Fixes: ff6c923dbec3 ("openrisc: Add support for external initrd images")
Signed-off-by: Stafford Horne 
Reviewed-by: Mike Rapoport

openrisc: Add support for external initrd images

2020-08-04T01:59:45+00:00

In OpenRISC we set the initrd_start and initrd_end based on the symbols
we setup in vmlinux.lds.S.  However, this is not needed if we use the
generic linker description in INIT_DATA_SECTION.

Removing our own initrd setup reduces code, but also the generic code
supports loading external initrd images.  A bootloader can load a rootfs
image into memory and we can configure devicetree to load it with:

        chosen {
                bootargs = "earlycon";
                stdout-path = "uart0:115200";
                linux,initrd-start = < 0x08000100 >;
                linux,initrd-end = < 0x08200000 >;
        };

Reported-by: Mateusz Holenko 
Signed-off-by: Stafford Horne

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

arch/openrisc/setup: Drop dummy_con initialization

2020-01-14T14:29:17+00:00

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar 
Link: https://lore.kernel.org/r/20191218214506.49252-16-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman