linux.git/arch/nios2/kernel, branch v6.13

nios2: Use str_yes_no() helper in show_cpuinfo()

2024-12-17T00:41:58+00:00

Remove hard-coded strings by using the str_yes_no() helper function.

Signed-off-by: Thorsten Blum 
Signed-off-by: Dinh Nguyen

Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-11-20T21:19:25+00:00

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Enable dtc "interrupt_provider" warnings for binding examples. Fix
     the warnings in fsl,mu-msi and ti,sci-inta due to this.

   - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
     altr,fpga-passive-serial to DT schema format

   - Add some documentation on the different forms of YAML text blocks
     which are a constant source of review comments

   - Fix some schema errors in constraints for arrays

   - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462

  DT core:

   - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n

   - Add some warnings on deprecated address handling

   - Rework early_init_dt_scan() so the arch can pass in the phys
     address of the DTB as __pa() is not always valid to use. This fixes
     a warning for arm64 with kexec.

   - Add and use some new DT graph iterators for iterating over ports
     and endpoints

   - Rework reserved-memory handling to be sized dynamically for fixed
     regions

   - Optimize of_modalias() to avoid a strlen() call

   - Constify struct device_node and property pointers where ever
     possible"

* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
  of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
  dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  of/address: Rework bus matching to avoid warnings
  of: WARN on deprecated #address-cells/#size-cells handling
  of/fdt: Don't use default address cell sizes for address translation
  dt-bindings: Enable dtc "interrupt_provider" warnings
  of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
  dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  media: xilinx-tpg: use new of_graph functions
  fbdev: omapfb: use new of_graph functions
  gpu: drm: omapdrm: use new of_graph functions
  ASoC: audio-graph-card2: use new of_graph functions
  ASoC: audio-graph-card: use new of_graph functions
  ASoC: test-component: use new of_graph functions
  of: property: use new of_graph functions
  of: property: add of_graph_get_next_port_endpoint()
  of: property: add of_graph_get_next_port()
  of: module: remove strlen() call in of_modalias()
  ...

of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

2024-10-29T20:32:45+00:00

 __pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().

Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.

Reported-by: Breno Leitao 
Suggested-by: Mark Rutland 
Signed-off-by: Usama Arif 
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm)

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

nios2: convert to generic syscall table

2024-07-10T12:23:38+00:00

The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.

nios2 has one extra system call that gets added to scripts/syscall.tbl.

The time32, stat64, and rlimit entries in the syscall_abis_32
line are for system calls that were part of the generic ABI when
arch/nios2 got added but are no longer enabled by default for new
architectures.

Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.

Signed-off-by: Arnd Bergmann

arch: make execmem setup available regardless of CONFIG_MODULES

2024-05-14T07:31:44+00:00

execmem does not depend on modules, on the contrary modules use
execmem.

To make execmem available when CONFIG_MODULES=n, for instance for
kprobes, split execmem_params initialization out from
arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y

Signed-off-by: Mike Rapoport (IBM) 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Luis Chamberlain

mm/execmem, arch: convert simple overrides of module_alloc to execmem

2024-05-14T07:31:43+00:00

Several architectures override module_alloc() only to define address
range for code allocations different than VMALLOC address space.

Provide a generic implementation in execmem that uses the parameters for
address space ranges, required alignment and page protections provided
by architectures.

The architectures must fill execmem_info structure and implement
execmem_arch_setup() that returns a pointer to that structure. This way the
execmem initialization won't be called from every architecture, but rather
from a central place, namely a core_initcall() in execmem.

The execmem provides execmem_alloc() API that wraps __vmalloc_node_range()
with the parameters defined by the architectures.  If an architecture does
not implement execmem_arch_setup(), execmem_alloc() will fall back to
module_alloc().

Signed-off-by: Mike Rapoport (IBM) 
Acked-by: Song Liu 
Reviewed-by: Masami Hiramatsu (Google) 
Signed-off-by: Luis Chamberlain

nios2: define virtual address space for modules

2024-05-14T07:31:43+00:00

nios2 uses kmalloc() to implement module_alloc() because CALL26/PCREL26
cannot reach all of vmalloc address space.

Define module space as 32MiB below the kernel base and switch nios2 to
use vmalloc for module allocations.

Suggested-by: Thomas Gleixner 
Acked-by: Dinh Nguyen 
Acked-by: Song Liu 
Signed-off-by: Mike Rapoport (IBM) 
Signed-off-by: Luis Chamberlain

nios2: Only use built-in devicetree blob if configured to do so

2024-04-03T19:35:53+00:00

Starting with commit 7b937cc243e5 ("of: Create of_root if no dtb provided
by firmware"), attempts to boot nios2 images with an external devicetree
blob result in a crash.

Kernel panic - not syncing: early_init_dt_alloc_memory_arch:
	Failed to allocate 72 bytes align=0x40

For nios2, a built-in devicetree blob always overrides devicetree blobs
provided by ROMMON/BIOS. This includes the new dummy devicetree blob.
Result is that the dummy devicetree blob is used even if an external
devicetree blob is provided. Since the dummy devicetree blob does not
include any memory information, memory allocations fail, resulting in
the crash.

To fix the problem, only use the built-in devicetree blob if
CONFIG_NIOS2_DTB_SOURCE_BOOL is enabled.

Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware")
Cc: Frank Rowand 
Cc: Stephen Boyd 
Cc: Rob Herring 
Signed-off-by: Guenter Roeck 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20240322065419.162416-1-linux@roeck-us.net
Signed-off-by: Rob Herring

vgacon, arch/*: remove unused screen_info definitions

2023-10-17T08:17:02+00:00

A number of architectures either kept the screen_info definition for
historical purposes as it used to be required by the generic VT code, or
they copied it from another architecture in order to build the VGA console
driver in an allmodconfig build. The mips definition is used by some
platforms, but the initialization on jazz is not needed.

Now that vgacon no longer builds on these architectures, remove the
stale definitions and initializations.

Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Thomas Zimmermann 
Reviewed-by: Philippe Mathieu-Daudé 
Acked-by: Dinh Nguyen 
Acked-by: Max Filippov 
Acked-by: Palmer Dabbelt 
Acked-by: Guo Ren 
Acked-by: Helge Deller 
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20231009211845.3136536-5-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman