linux.git/arch/mips, branch v5.6

MIPS: DTS: CI20: fix interrupt for pcf8563 RTC

2020-03-07T08:54:24+00:00

Interrupts should not be specified by interrupt line but by
gpio parent and reference.

Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller 
Reviewed-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer

MIPS: DTS: CI20: fix PMU definitions for ACT8600

2020-03-07T08:53:21+00:00

There is a ACT8600 on the CI20 board and the bindings of the
ACT8865 driver have changed without updating the CI20 device
tree. Therefore the PMU can not be probed successfully and
is running in power-on reset state.

Fix DT to match the latest act8865-regulator bindings.

Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller 
Reviewed-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer

MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling

2020-02-27T12:52:06+00:00

The CONFIG_MIPS_CMDLINE_DTB_EXTEND option is used so that the kernel
arguments provided in the 'bootargs' property in devicetree are extended
with the kernel arguments provided by the bootloader.

The code was broken, as it didn't actually take any of the kernel
arguments provided in devicetree when that option was set.

Fixes: 7784cac69735 ("MIPS: cmdline: Clean up boot_command_line initialization")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer

MIPS: ingenic: DTS: Fix watchdog nodes

2020-02-19T18:52:35+00:00

The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.

However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.

Fix this problem by updating the watchdog nodes to comply with the new
ABI.

Fixes: 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver")
Signed-off-by: Paul Cercueil 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: Zhou Yanjie 
Cc: od@zcrc.me
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc:  # v5.5+

MIPS: X1000: Fix clock of watchdog node.

2020-02-19T18:49:44+00:00

The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.

However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.

Fix this problem by updating the clock of watchdog node from
"&cgu X1000_CLK_RTCLK" to "&tcu TCU_CLK_WDT" to comply with the new
ABI.

Fixes: 7a16ccd300c2 ("[v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support.").
Signed-off-by: 周琰杰 (Zhou Yanjie) 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: paul@crapouillou.net
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: ralf@linux-mips.org
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: dongsheng.qiu@ingenic.com

MIPS: vdso: Wrap -mexplicit-relocs in cc-option

2020-02-19T18:30:10+00:00

Clang does not support this option and errors out:

clang-11: error: unknown argument: '-mexplicit-relocs'

Clang does not appear to need this flag like GCC does because the jalr
check that was added in commit 976c23af3ee5 ("mips: vdso: add build
time check that no 'jalr t9' calls left") passes just fine with

$ make ARCH=mips CC=clang CROSS_COMPILE=mipsel-linux-gnu- malta_defconfig arch/mips/vdso/

even before commit d3f703c4359f ("mips: vdso: fix 'jalr t9' crash in
vdso code").

-mrelax-pic-calls has been supported since clang 9, which is the
earliest version that could build a working MIPS kernel, and it is the
default for clang so just leave it be.

Fixes: d3f703c4359f ("mips: vdso: fix 'jalr t9' crash in vdso code")
Link: https://github.com/ClangBuiltLinux/linux/issues/890
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Tested-by: Nick Desaulniers 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com

MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'

2020-02-15T20:44:03+00:00

Pointer on the memory allocated by 'alloc_progmem()' is stored in
'v->load_addr'. So this is this memory that should be freed by
'release_progmem()'.

'release_progmem()' is only a call to 'kfree()'.

With the current code, there is both a double free and a memory leak.
Fix it by passing the correct pointer to 'release_progmem()'.

Fixes: e01402b115ccc ("More AP / SP bits for the 34K, the Malta bits and things. Still wants")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Paul Burton 
Cc: ralf@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org

MIPS: cavium_octeon: Fix syncw generation.

2020-02-15T20:44:03+00:00

The Cavium Octeon CPU uses a special sync instruction for implementing
wmb, and due to a CPU bug, the instruction must appear twice. A macro
had been defined to hide this:

 #define __SYNC_rpt(type)     (1 + (type == __SYNC_wmb))

which was intended to evaluate to 2 for __SYNC_wmb, and 1 for any other
type of sync. However, this expression is evaluated by the assembler,
and not the compiler, and the result of '==' in the assembler is 0 or
-1, not 0 or 1 as it is in C. The net result was wmb() producing no code
at all. The simple fix in this patch is to change the '+' to '-'.

Fixes: bf92927251b3 ("MIPS: barrier: Add __SYNC() infrastructure")
Signed-off-by: Mark Tomlinson 
Tested-by: Chris Packham 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

mips: vdso: add build time check that no 'jalr t9' calls left

2020-02-15T20:44:03+00:00

vdso shared object cannot have GOT based PIC 'jalr t9' calls
because nobody set GOT table in vdso. Contributing into vdso
.o files are compiled in PIC mode and as result for internal
static functions calls compiler will generate 'jalr t9'
instructions. Those are supposed to be converted into PC
relative 'bal' calls by linker when relocation are processed.

Mips global GOT entries do have dynamic relocations and they
will be caught by cmd_vdso_check Makefile rule. Static PIC
calls go through mips local GOT entries that do not have
dynamic relocations. For those 'jalr t9' calls could be present
but without dynamic relocations and they need to be converted
to 'bal' calls by linker.

Add additional build time check to make sure that no 'jalr t9'
slip through because of some toolchain misconfiguration that
prevents 'jalr t9' to 'bal' conversion.

Signed-off-by: Victor Kamensky 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Vincenzo Frascino 
Cc: bruce.ashfield@gmail.com
Cc: richard.purdie@linuxfoundation.org

MIPS: Disable VDSO time functionality on microMIPS

2020-02-15T20:44:03+00:00

A check we're about to add to pick up on function calls that depend on
bogus use of the GOT in the VDSO picked up on instances of such function
calls in microMIPS builds. Since the code appears genuinely problematic,
and given the relatively small amount of use & testing that microMIPS
sees, go ahead & disable the VDSO for microMIPS builds.

Signed-off-by: Paul Burton