linux.git/arch/mips, branch v4.3-rc2

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-09-18T16:23:08+00:00

Pull KVM fixes from Paolo Bonzini:
 "Mostly stable material, a lot of ARM fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
  sched: access local runqueue directly in single_task_running
  arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'
  arm64: KVM: Remove all traces of the ThumbEE registers
  arm: KVM: Disable virtual timer even if the guest is not using it
  arm64: KVM: Disable virtual timer even if the guest is not using it
  arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resources
  KVM: s390: Replace incorrect atomic_or with atomic_andnot
  arm: KVM: Fix incorrect device to IPA mapping
  arm64: KVM: Fix user access for debug registers
  KVM: vmx: fix VPID is 0000H in non-root operation
  KVM: add halt_attempted_poll to VCPU stats
  kvm: fix zero length mmio searching
  kvm: fix double free for fast mmio eventfd
  kvm: factor out core eventfd assign/deassign logic
  kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfd
  KVM: make the declaration of functions within 80 characters
  KVM: arm64: add workaround for Cortex-A57 erratum #852523
  KVM: fix polling for guest halt continued even if disable it
  arm/arm64: KVM: Fix PSCI affinity info return value for non valid cores
  arm64: KVM: set {v,}TCR_EL2 RES1 bits
  ...

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Jiang Liu

KVM: add halt_attempted_poll to VCPU stats

2015-09-16T10:17:00+00:00

This new statistic can help diagnosing VCPUs that, for any reason,
trigger bad behavior of halt_poll_ns autotuning.

For example, say halt_poll_ns = 480000, and wakeups are spaced exactly
like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes
10+20+40+80+160+320+480 = 1110 microseconds out of every
479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then
is consuming about 30% more CPU than it would use without
polling.  This would show as an abnormally high number of
attempted polling compared to the successful polls.

Acked-by: Christian Borntraeger 
Signed-off-by: Paolo Bonzini

dma-mapping: consolidate dma_set_mask

2015-09-10T20:29:01+00:00

Almost everyone implements dma_set_mask the same way, although some time
that's hidden in ->set_dma_mask methods.

This patch consolidates those into a common implementation that either
calls ->set_dma_mask if present or otherwise uses the default
implementation.  Some architectures used to only call ->set_dma_mask
after the initial checks, and those instance have been fixed to do the
full work.  h8300 implemented dma_set_mask bogusly as a no-ops and has
been fixed.

Unfortunately some architectures overload unrelated semantics like changing
the dma_ops into it so we still need to allow for an architecture override
for now.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_supported

2015-09-10T20:29:01+00:00

Most architectures just call into ->dma_supported, but some also return 1
if the method is not present, or 0 if no dma ops are present (although
that should never happeb). Consolidate this more broad version into
common code.

Also fix h8300 which inorrectly always returned 0, which would have been
a problem if it's dma_set_mask implementation wasn't a similarly buggy
noop.

As a few architectures have much more elaborate implementations, we
still allow for arch overrides.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: cosolidate dma_mapping_error

2015-09-10T20:29:01+00:00

Currently there are three valid implementations of dma_mapping_error:

 (1) call ->mapping_error
 (2) check for a hardcoded error code
 (3) always return 0

This patch provides a common implementation that calls ->mapping_error
if present, then checks for DMA_ERROR_CODE if defined or otherwise
returns 0.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_noncoherent

2015-09-10T20:29:01+00:00

Most architectures do not support non-coherent allocations and either
define dma_{alloc,free}_noncoherent to their coherent versions or stub
them out.

Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips
implements them directly.

This patch moves the Openrisc version to common code, and handles the
DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance.

Note that actual non-coherent allocations require a dma_cache_sync
implementation, so if non-coherent allocations didn't work on
an architecture before this patch they still won't work after it.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}

2015-09-10T20:29:01+00:00

Since 2009 we have a nice asm-generic header implementing lots of DMA API
functions for architectures using struct dma_map_ops, but unfortunately
it's still missing a lot of APIs that all architectures still have to
duplicate.

This series consolidates the remaining functions, although we still need
arch opt outs for two of them as a few architectures have very
non-standard implementations.

This patch (of 5):

The coherent DMA allocator works the same over all architectures supporting
dma_map operations.

This patch consolidates them and converges the minor differences:

 - the debug_dma helpers are now called from all architectures, including
   those that were previously missing them
 - dma_alloc_from_coherent and dma_release_from_coherent are now always
   called from the generic alloc/free routines instead of the ops
   dma-mapping-common.h always includes dma-coherent.h to get the defintions
   for them, or the stubs if the architecture doesn't support this feature
 - checks for ->alloc / ->free presence are removed.  There is only one
   magic instead of dma_map_ops without them (mic_dma_ops) and that one
   is x86 only anyway.

Besides that only x86 needs special treatment to replace a default devices
if none is passed and tweak the gfp_flags.  An optional arch hook is provided
for that.

[linux@roeck-us.net: fix build]
[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Guenter Roeck 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

lib/decompressors: use real out buf size for gunzip with kernel

2015-09-10T20:29:01+00:00

When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.

| early console in decompress_kernel
| decompress_kernel:
|       input: [0x807f2143b4-0x807ff61aee]
|      output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
|  new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
|  decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted

the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len.  gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.

We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.

We have decompress_* support:
    1. inbuf[]/outbuf[] for kernel preboot.
    2. inbuf[]/flush() for initramfs
    3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].

Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.

Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: Yinghai Lu 
Cc: Alexandre Courbot 
Cc: Jon Medhurst 
Cc: Stephen Warren 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

kexec: split kexec_load syscall from kexec core code

2015-09-10T20:29:01+00:00

There are two kexec load syscalls, kexec_load another and kexec_file_load.
 kexec_file_load has been splited as kernel/kexec_file.c.  In this patch I
split kexec_load syscall code to kernel/kexec.c.

And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.

The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled.  But kexec-tools use
kexec_load syscall can bypass the checking.

Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel.  KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.

Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig.  Also updated general kernel code with to
kexec_load syscall.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young 
Cc: Eric W. Biederman 
Cc: Vivek Goyal 
Cc: Petr Tesarik 
Cc: Theodore Ts'o 
Cc: Josh Boyer 
Cc: David Howells 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds