linux.git/arch/mips, branch v4.20

Merge tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2018-12-01T02:41:06+00:00

Pull few more MIPS fixes from Paul Burton:

 - Fix mips_get_syscall_arg() to operate on the task specified when
   detecting o32 tasks running on MIPS64 kernels.

 - Fix some incorrect GPIO pin muxing for the MT7620 SoC.

 - Update the linux-mips mailing list address.

* tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Update linux-mips mailing list address
  MIPS: ralink: Fix mt7620 nd_sd pinmux
  mips: fix mips_get_syscall_arg o32 check

Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2018-11-30T17:32:34+00:00

Pull tracing fixes from Steven Rostedt:
 "While rewriting the function graph tracer, I discovered a design flaw
  that was introduced by a patch that tried to fix one bug, but by doing
  so created another bug.

  As both bugs corrupt the output (but they do not crash the kernel), I
  decided to fix the design such that it could have both bugs fixed. The
  original fix, fixed time reporting of the function graph tracer when
  doing a max_depth of one. This was code that can test how much the
  kernel interferes with userspace. But in doing so, it could corrupt
  the time keeping of the function profiler.

  The issue is that the curr_ret_stack variable was being used for two
  different meanings. One was to keep track of the stack pointer on the
  ret_stack (shadow stack used by the function graph tracer), and the
  other use case was the graph call depth. Although, the two may be
  closely related, where they got updated was the issue that lead to the
  two different bugs that required the two use cases to be updated
  differently.

  The big issue with this fix is that it requires changing each
  architecture. The good news is, I was able to remove a lot of code
  that was duplicated within the architectures and place it into a
  single location. Then I could make the fix in one place.

  I pushed this code into linux-next to let it settle over a week, and
  before doing so, I cross compiled all the affected architectures to
  make sure that they built fine.

  In the mean time, I also pulled in a patch that fixes the sched_switch
  previous tasks state output, that was not actually correct"

* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  sched, trace: Fix prev_state output in sched_switch tracepoint
  function_graph: Have profiler use curr_ret_stack and not depth
  function_graph: Reverse the order of pushing the ret_stack and the callback
  function_graph: Move return callback before update of curr_ret_stack
  function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
  function_graph: Make ftrace_push_return_trace() static
  sparc/function_graph: Simplify with function_graph_enter()
  sh/function_graph: Simplify with function_graph_enter()
  s390/function_graph: Simplify with function_graph_enter()
  riscv/function_graph: Simplify with function_graph_enter()
  powerpc/function_graph: Simplify with function_graph_enter()
  parisc: function_graph: Simplify with function_graph_enter()
  nds32: function_graph: Simplify with function_graph_enter()
  MIPS: function_graph: Simplify with function_graph_enter()
  microblaze: function_graph: Simplify with function_graph_enter()
  arm64: function_graph: Simplify with function_graph_enter()
  ARM: function_graph: Simplify with function_graph_enter()
  x86/function_graph: Simplify with function_graph_enter()
  function_graph: Create function_graph_enter() to consolidate architecture code

MIPS: function_graph: Simplify with function_graph_enter()

2018-11-28T01:30:36+00:00

The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().

Have MIPS use the new code, and remove the shadow stack management as well as
having to set up the trace structure.

This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.

Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware)

MIPS: ralink: Fix mt7620 nd_sd pinmux

2018-11-26T18:19:38+00:00

In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.

Reported-by: Kristian Evensen 
Signed-off-by: Mathias Kresin 
Signed-off-by: Paul Burton 
Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+

mips: fix mips_get_syscall_arg o32 check

2018-11-21T19:21:52+00:00

When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.

This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.

Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+

MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation

2018-11-15T23:42:15+00:00

Both the Loongson3 & SGI-IP27 platforms set max_low_pfn to the last
available PFN describing memory. They both do it in paging_init() which
is later than ideal since max_low_pfn is used before that function is
called. Simplify both platforms to trivially initialize max_low_pfn
using the end address of DRAM, and do it earlier in prom_meminit().

Signed-off-by: Paul Burton 
Suggested-by: Mike Rapoport 
Tested-by: Thomas Bogendoerfer 
Patchwork: https://patchwork.linux-mips.org/patch/21104/
References: https://patchwork.linux-mips.org/patch/21031/
Cc: Huacai Chen 
Cc: Mike Rapoport 
Cc: Thomas Bogendoerfer 
Cc: linux-mips@linux-mips.org

MIPS: Let early memblock_alloc*() allocate memories bottom-up

2018-11-12T19:36:58+00:00

After switched to NO_BOOTMEM, there are several boot failures. Some of
them have been fixed and some of them haven't. I find that many of them
are because of memory allocations are top-down, while the old behavior
is bottom-up. This patch let early memblock_alloc*() allocate memories
bottom-up to avoid some potential problems.

Signed-off-by: Huacai Chen 
Signed-off-by: Paul Burton 
Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM")
Patchwork: https://patchwork.linux-mips.org/patch/21069/
References: https://patchwork.linux-mips.org/patch/21031/
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Steven J . Hill 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu

MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver

2018-11-12T19:36:53+00:00

Re-enable OCTEON USB driver which is needed on older hardware
(e.g. EdgeRouter Lite) for mass storage etc. This got accidentally
deleted when config options were changed for OCTEON2/3 USB.

Signed-off-by: Aaro Koskinen 
Signed-off-by: Paul Burton 
Fixes: f922bc0ad08b ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers")
Patchwork: https://patchwork.linux-mips.org/patch/21077/
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.14+

MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation

2018-11-05T18:08:13+00:00

Fix a MIPS `dma_alloc_coherent' regression from commit bc3ec75de545
("dma-mapping: merge direct and noncoherent ops") that causes a cached
allocation to be returned on noncoherent cache systems.

This is due to an inverted check now used in the MIPS implementation of
`arch_dma_alloc' on the result from `dma_direct_alloc_pages' before
doing the cached-to-uncached mapping of the allocation address obtained.
The mapping has to be done for a non-NULL rather than NULL result,
because a NULL result means the allocation has failed.

Invert the check for correct operation then.

Signed-off-by: Maciej W. Rozycki 
Signed-off-by: Paul Burton 
Reviewed-by: Christoph Hellwig 
Fixes: bc3ec75de545 ("dma-mapping: merge direct and noncoherent ops")
Patchwork: https://patchwork.linux-mips.org/patch/20965/

MIPS: OCTEON: fix out of bounds array access on CN68XX

2018-11-05T18:03:35+00:00

The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.

Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX")
Signed-off-by: Aaro Koskinen 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/20949/
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+