linux.git/arch/mips, branch v4.19 Linux kernel source tree MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression 2018-10-05T16:41:39+00:00 Maciej W. Rozycki macro@linux-mips.org 2018-10-02T11:50:11+00:00 148b9aba99e0bbadf361747d21456e1589015f74 Fix a commit 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for small_memset") regression and remove assembly warnings: arch/mips/lib/memset.S: Assembler messages: arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot triggering with the CPU_DADDI_WORKAROUNDS option set and this code: PTR_SUBU a2, t1, a0 jr ra PTR_ADDIU a2, 1 This is because with that option in place the DADDIU instruction, which the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn expands to an LI/DADDU (or actually ADDIU/DADDU) sequence: 13c: 01a4302f dsubu a2,t1,a0 140: 03e00008 jr ra 144: 24010001 li at,1 148: 00c1302d daddu a2,a2,at ... Correct this by switching off the `noreorder' assembly mode and letting GAS schedule this jump's delay slot, as there is nothing special about it that would require manual scheduling. With this change in place correct code is produced: 13c: 01a4302f dsubu a2,t1,a0 140: 24010001 li at,1 144: 03e00008 jr ra 148: 00c1302d daddu a2,a2,at ... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for small_memset") Patchwork: https://patchwork.linux-mips.org/patch/20833/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org # 4.17+ 
Fix a commit 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for
small_memset") regression and remove assembly warnings:

arch/mips/lib/memset.S: Assembler messages:
arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot

triggering with the CPU_DADDI_WORKAROUNDS option set and this code:

	PTR_SUBU	a2, t1, a0
	jr		ra
	 PTR_ADDIU	a2, 1

This is because with that option in place the DADDIU instruction, which
the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn
expands to an LI/DADDU (or actually ADDIU/DADDU) sequence:

 13c:	01a4302f 	dsubu	a2,t1,a0
 140:	03e00008 	jr	ra
 144:	24010001 	li	at,1
 148:	00c1302d 	daddu	a2,a2,at
	...

Correct this by switching off the `noreorder' assembly mode and letting
GAS schedule this jump's delay slot, as there is nothing special about
it that would require manual scheduling.  With this change in place
correct code is produced:

 13c:	01a4302f 	dsubu	a2,t1,a0
 140:	24010001 	li	at,1
 144:	03e00008 	jr	ra
 148:	00c1302d 	daddu	a2,a2,at
	...

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for small_memset")
Patchwork: https://patchwork.linux-mips.org/patch/20833/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: stable@vger.kernel.org # 4.17+
MIPS: Fix CONFIG_CMDLINE handling 2018-09-28T19:09:04+00:00 Paul Burton paul.burton@mips.com 2018-09-27T22:59:18+00:00 951d223c6c16ed5d2a71a4d1f13c1e65d6882156 Commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before plat_mem_setup") fixed a problem for systems which have CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no bootargs property or an empty one. In this configuration early_init_dt_scan_chosen() copies CONFIG_CMDLINE into boot_command_line, but the MIPS code doesn't know this so it appends CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The result is that boot_command_line contains the arguments from CONFIG_CMDLINE twice. That commit took the approach of simply setting up boot_command_line from the MIPS code before early_init_dt_scan_chosen() runs, causing it not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no bootargs property is found. Unfortunately this is problematic for systems which do have a non-empty bootargs property & CONFIG_CMDLINE_BOOL=y. There early_init_dt_scan_chosen() will overwrite boot_command_line with the arguments from DT, which means we lose those from CONFIG_CMDLINE entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs property which we should ignore, it will instead be honoured breaking those configurations too. Fix this by reverting commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before plat_mem_setup") to restore the former behaviour, and fixing the CONFIG_CMDLINE duplication issue by initializing boot_command_line to a non-empty string that early_init_dt_scan_chosen() will not overwrite with CONFIG_CMDLINE. This is a little ugly, but cleanup in this area is on its way. In the meantime this is at least easy to backport & contains the ugliness within arch/mips/. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 8ce355cf2e38 ("MIPS: Setup boot_command_line before plat_mem_setup") References: https://patchwork.linux-mips.org/patch/18804/ Patchwork: https://patchwork.linux-mips.org/patch/20813/ Cc: Frank Rowand <frowand.list@gmail.com> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.16+ 
Commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before
plat_mem_setup") fixed a problem for systems which have
CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no
bootargs property or an empty one. In this configuration
early_init_dt_scan_chosen() copies CONFIG_CMDLINE into
boot_command_line, but the MIPS code doesn't know this so it appends
CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The
result is that boot_command_line contains the arguments from
CONFIG_CMDLINE twice.

That commit took the approach of simply setting up boot_command_line
from the MIPS code before early_init_dt_scan_chosen() runs, causing it
not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no
bootargs property is found.

Unfortunately this is problematic for systems which do have a non-empty
bootargs property & CONFIG_CMDLINE_BOOL=y. There
early_init_dt_scan_chosen() will overwrite boot_command_line with the
arguments from DT, which means we lose those from CONFIG_CMDLINE
entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have
CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or
CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs
property which we should ignore, it will instead be honoured breaking
those configurations too.

Fix this by reverting commit 8ce355cf2e38 ("MIPS: Setup
boot_command_line before plat_mem_setup") to restore the former
behaviour, and fixing the CONFIG_CMDLINE duplication issue by
initializing boot_command_line to a non-empty string that
early_init_dt_scan_chosen() will not overwrite with CONFIG_CMDLINE.

This is a little ugly, but cleanup in this area is on its way. In the
meantime this is at least easy to backport & contains the ugliness
within arch/mips/.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8ce355cf2e38 ("MIPS: Setup boot_command_line before plat_mem_setup")
References: https://patchwork.linux-mips.org/patch/18804/
Patchwork: https://patchwork.linux-mips.org/patch/20813/
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.16+
MIPS: VDSO: Always map near top of user memory 2018-09-28T19:09:00+00:00 Paul Burton paul.burton@mips.com 2018-09-25T22:51:26+00:00 ea7e0480a4b695d0aa6b3fa99bd658a003122113 When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ 
When using the legacy mmap layout, for example triggered using ulimit -s
unlimited, get_unmapped_area() fills memory from bottom to top starting
from a fairly low address near TASK_UNMAPPED_BASE.

This placement is suboptimal if the user application wishes to allocate
large amounts of heap memory using the brk syscall. With the VDSO being
located low in the user's virtual address space, the amount of space
available for access using brk is limited much more than it was prior to
the introduction of the VDSO.

For example:

  # ulimit -s unlimited; cat /proc/self/maps
  00400000-004ec000 r-xp 00000000 08:00 71436      /usr/bin/coreutils
  004fc000-004fd000 rwxp 000ec000 08:00 71436      /usr/bin/coreutils
  004fd000-0050f000 rwxp 00000000 00:00 0
  00cc3000-00ce4000 rwxp 00000000 00:00 0          [heap]
  2ab96000-2ab98000 r--p 00000000 00:00 0          [vvar]
  2ab98000-2ab99000 r-xp 00000000 00:00 0          [vdso]
  2ab99000-2ab9d000 rwxp 00000000 00:00 0
  ...

Resolve this by adjusting STACK_TOP to reserve space for the VDSO &
providing an address hint to get_unmapped_area() causing it to use this
space even when using the legacy mmap layout.

We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64
bit systems respectively within which we randomize the VDSO base
address. Previously this randomization was taken care of by the mmap
base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB
sizes are somewhat arbitrary but chosen such that we have some
randomization without taking up too much of the user's virtual address
space, which is often in short supply for 32 bit systems.

With this the VDSO is always mapped at a high address, leaving lots of
space for statically linked programs to make use of brk:

  # ulimit -s unlimited; cat /proc/self/maps
  00400000-004ec000 r-xp 00000000 08:00 71436      /usr/bin/coreutils
  004fc000-004fd000 rwxp 000ec000 08:00 71436      /usr/bin/coreutils
  004fd000-0050f000 rwxp 00000000 00:00 0
  00c28000-00c49000 rwxp 00000000 00:00 0          [heap]
  ...
  7f67c000-7f69d000 rwxp 00000000 00:00 0          [stack]
  7f7fc000-7f7fd000 rwxp 00000000 00:00 0
  7fcf1000-7fcf3000 r--p 00000000 00:00 0          [vvar]
  7fcf3000-7fcf4000 r-xp 00000000 00:00 0          [vdso]

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Huacai Chen <chenhc@lemote.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-09-13T03:32:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-09-13T03:32:50+00:00 67b076095dd7a13ff24e9b5f830fcb1291ae0678 Pull networking fixes from David Miller: 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi and Florian Westphal. 2) Memory leak in be2net driver, from Petr Oros. 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem. 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen. 5) tipc_release() needs to orphan the sock, from Cong Wang. 6) Need to program TxConfig register after TX/RX is enabled in r8169 driver, not beforehand, from Maciej S. Szmigiero. 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal. 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo. 9) syzbot can create conditions where kernel log is flooded with synflood warnings due to creation of many listening sockets, fix that. From Willem de Bruijn. 10) Fix RCU issues in rds socket layer, from Cong Wang. 11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) nfp: flower: reject tunnel encap with ipv6 outer headers for offloading nfp: flower: fix vlan match by checking both vlan id and vlan pcp tipc: check return value of __tipc_dump_start() s390/qeth: don't dump past end of unknown HW header s390/qeth: use vzalloc for QUERY OAT buffer s390/qeth: switch on SG by default for IQD devices s390/qeth: indicate error when netdev allocation fails rds: fix two RCU related problems r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED erspan: fix error handling for erspan tunnel erspan: return PACKET_REJECT when the appropriate tunnel is not found tcp: rate limit synflood warnings further MIPS: lantiq: dma: add dev pointer netfilter: xt_hashlimit: use s->file instead of s->private netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT netfilter: conntrack: reset tcp maxwin on re-register qmi_wwan: Support dynamic config on Quectel EP06 ethernet: renesas: convert to SPDX identifiers ... 
Pull networking fixes from David Miller:

 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
    and Florian Westphal.

 2) Memory leak in be2net driver, from Petr Oros.

 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.

 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.

 5) tipc_release() needs to orphan the sock, from Cong Wang.

 6) Need to program TxConfig register after TX/RX is enabled in r8169
    driver, not beforehand, from Maciej S. Szmigiero.

 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.

 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.

 9) syzbot can create conditions where kernel log is flooded with
    synflood warnings due to creation of many listening sockets, fix
    that. From Willem de Bruijn.

10) Fix RCU issues in rds socket layer, from Cong Wang.

11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
  nfp: flower: fix vlan match by checking both vlan id and vlan pcp
  tipc: check return value of __tipc_dump_start()
  s390/qeth: don't dump past end of unknown HW header
  s390/qeth: use vzalloc for QUERY OAT buffer
  s390/qeth: switch on SG by default for IQD devices
  s390/qeth: indicate error when netdev allocation fails
  rds: fix two RCU related problems
  r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
  erspan: fix error handling for erspan tunnel
  erspan: return PACKET_REJECT when the appropriate tunnel is not found
  tcp: rate limit synflood warnings further
  MIPS: lantiq: dma: add dev pointer
  netfilter: xt_hashlimit: use s->file instead of s->private
  netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
  netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
  netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
  netfilter: conntrack: reset tcp maxwin on re-register
  qmi_wwan: Support dynamic config on Quectel EP06
  ethernet: renesas: convert to SPDX identifiers
  ...
MIPS: lantiq: dma: add dev pointer 2018-09-12T06:33:19+00:00 Hauke Mehrtens hauke@hauke-m.de 2018-09-09T19:26:23+00:00 2d946e5bcdabc1deef72d01bc92a2801c71d6d8d dma_zalloc_coherent() now crashes if no dev pointer is given. Add a dev pointer to the ltq_dma_channel structure and fill it in the driver using it. This fixes a bug introduced in kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.

This fixes a bug introduced in kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2018-09-08T22:52:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-09-08T22:52:45+00:00 f8f65382c98a28e3c2b20df9dd4231dca5a11682 Pull KVM fixes from Radim Krčmář: "ARM: - Fix a VFP corruption in 32-bit guest - Add missing cache invalidation for CoW pages - Two small cleanups s390: - Fallout from the hugetlbfs support: pfmf interpretion and locking - VSIE: fix keywrapping for nested guests PPC: - Fix a bug where pages might not get marked dirty, causing guest memory corruption on migration - Fix a bug causing reads from guest memory to use the wrong guest real address for very large HPT guests (>256G of memory), leading to failures in instruction emulation. x86: - Fix out of bound access from malicious pv ipi hypercalls (introduced in rc1) - Fix delivery of pending interrupts when entering a nested guest, preventing arbitrarily late injection - Sanitize kvm_stat output after destroying a guest - Fix infinite loop when emulating a nested guest page fault and improve the surrounding emulation code - Two minor cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: LAPIC: Fix pv ipis out-of-bounds access KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2 arm64: KVM: Remove pgd_lock KVM: Remove obsolete kvm_unmap_hva notifier backend arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting KVM: s390: vsie: copy wrapping keys to right place KVM: s390: Fix pfmf and conditional skey emulation tools/kvm_stat: re-animate display of dead guests tools/kvm_stat: indicate dead guests as such tools/kvm_stat: handle guest removals more gracefully tools/kvm_stat: don't reset stats when setting PID filter for debugfs tools/kvm_stat: fix updates for dead guests tools/kvm_stat: fix handling of invalid paths in debugfs provider tools/kvm_stat: fix python3 issues KVM: x86: Unexport x86_emulate_instruction() KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction() KVM: x86: Do not re-{try,execute} after failed emulation in L2 KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault ... 
Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix a VFP corruption in 32-bit guest
   - Add missing cache invalidation for CoW pages
   - Two small cleanups

  s390:
   - Fallout from the hugetlbfs support: pfmf interpretion and locking
   - VSIE: fix keywrapping for nested guests

  PPC:
   - Fix a bug where pages might not get marked dirty, causing guest
     memory corruption on migration
   - Fix a bug causing reads from guest memory to use the wrong guest
     real address for very large HPT guests (>256G of memory), leading
     to failures in instruction emulation.

  x86:
   - Fix out of bound access from malicious pv ipi hypercalls
     (introduced in rc1)
   - Fix delivery of pending interrupts when entering a nested guest,
     preventing arbitrarily late injection
   - Sanitize kvm_stat output after destroying a guest
   - Fix infinite loop when emulating a nested guest page fault and
     improve the surrounding emulation code
   - Two minor cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  KVM: LAPIC: Fix pv ipis out-of-bounds access
  KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
  arm64: KVM: Remove pgd_lock
  KVM: Remove obsolete kvm_unmap_hva notifier backend
  arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
  KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
  KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
  KVM: s390: vsie: copy wrapping keys to right place
  KVM: s390: Fix pfmf and conditional skey emulation
  tools/kvm_stat: re-animate display of dead guests
  tools/kvm_stat: indicate dead guests as such
  tools/kvm_stat: handle guest removals more gracefully
  tools/kvm_stat: don't reset stats when setting PID filter for debugfs
  tools/kvm_stat: fix updates for dead guests
  tools/kvm_stat: fix handling of invalid paths in debugfs provider
  tools/kvm_stat: fix python3 issues
  KVM: x86: Unexport x86_emulate_instruction()
  KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
  KVM: x86: Do not re-{try,execute} after failed emulation in L2
  KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
  ...
KVM: Remove obsolete kvm_unmap_hva notifier backend 2018-09-07T13:06:02+00:00 Marc Zyngier marc.zyngier@arm.com 2018-08-23T09:18:14+00:00 a35381e10dc46dd75e65e4b3832d9a0005d48d44 kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to deal with. Drop the now obsolete code. Fixes: fb1522e099f0 ("KVM: update to new mmu_notifier semantic v2") Cc: James Hogan <jhogan@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> 
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.

Fixes: fb1522e099f0 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
MIPS: VDSO: Match data page cache colouring when D$ aliases 2018-08-31T17:07:21+00:00 Paul Burton paul.burton@mips.com 2018-08-30T18:01:21+00:00 0f02cfbc3d9e413d450d8d0fd660077c23f67eff When a system suffers from dcache aliasing a user program may observe stale VDSO data from an aliased cache line. Notably this can break the expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name suggests, monotonic. In order to ensure that users observe updates to the VDSO data page as intended, align the user mappings of the VDSO data page such that their cache colouring matches that of the virtual address range which the kernel will use to update the data page - typically its unmapped address within kseg0. This ensures that we don't introduce aliasing cache lines for the VDSO data page, and therefore that userland will observe updates without requiring cache invalidation. Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Rene Nielsen <rene.nielsen@microsemi.com> Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Patchwork: https://patchwork.linux-mips.org/patch/20344/ Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ 
When a system suffers from dcache aliasing a user program may observe
stale VDSO data from an aliased cache line. Notably this can break the
expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name
suggests, monotonic.

In order to ensure that users observe updates to the VDSO data page as
intended, align the user mappings of the VDSO data page such that their
cache colouring matches that of the virtual address range which the
kernel will use to update the data page - typically its unmapped address
within kseg0.

This ensures that we don't introduce aliasing cache lines for the VDSO
data page, and therefore that userland will observe updates without
requiring cache invalidation.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Rene Nielsen <rene.nielsen@microsemi.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Patchwork: https://patchwork.linux-mips.org/patch/20344/
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Merge tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2018-08-25T20:40:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-25T20:40:38+00:00 1bc276775d93faf42a3bb1c684cdb838ded8be56 Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile 
Pull more Kbuild updates from Masahiro Yamada:

 - add build_{menu,n,g,x}config targets for compile-testing Kconfig

 - fix and improve recursive dependency detection in Kconfig

 - fix parallel building of menuconfig/nconfig

 - fix syntax error in clang-version.sh

 - suppress distracting log from syncconfig

 - remove obsolete "rpm" target

 - remove VMLINUX_SYMBOL(_STR) macro entirely

 - fix microblaze build with CONFIG_DYNAMIC_FTRACE

 - move compiler test for dead code/data elimination to Kconfig

 - rename well-known LDFLAGS variable to KBUILD_LDFLAGS

 - misc fixes and cleanups

* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rename LDFLAGS to KBUILD_LDFLAGS
  kbuild: pass LDFLAGS to recordmcount.pl
  kbuild: test dead code/data elimination support in Kconfig
  initramfs: move gen_initramfs_list.sh from scripts/ to usr/
  vmlinux.lds.h: remove stale <linux/export.h> include
  export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
  Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
  kbuild: make sorting initramfs contents independent of locale
  kbuild: remove "rpm" target, which is alias of "rpm-pkg"
  kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
  kconfig: suppress "configuration written to .config" for syncconfig
  kconfig: fix "Can't open ..." in parallel build
  kbuild: Add a space after `!` to prevent parsing as file pattern
  scripts: modpost: check memory allocation results
  kconfig: improve the recursive dependency report
  kconfig: report recursive dependency involving 'imply'
  kconfig: error out when seeing recursive dependency
  kconfig: add build-only configurator targets
  scripts/dtc: consolidate include path options in Makefile
kbuild: rename LDFLAGS to KBUILD_LDFLAGS 2018-08-23T23:22:08+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2018-08-23T23:20:39+00:00 d503ac531a5246e4d910f971b213807fea925956 Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> 
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>