linux.git/arch/mips, branch v3.18-rc2

MIPS: SEAD3: Fix I2C device registration.

2014-10-24T11:34:42+00:00

This isn't a module and shouldn't be one.

Signed-off-by: Ralf Baechle

MIPS: SEAD3: Nuke PIC32 I2C driver.

2014-10-24T11:27:37+00:00

A platform driver for which nothing ever registers the corresponding
platform device.

Also it was driving the same hardware as sead3-i2c-drv.c so redundant
anyway and couldn't co-exist with that driver because each of them was
using a private spinlock to protect access to the same hardware
resources.

This also fixes a randconfig problem:

arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of
function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration]
  ret = i2c_add_numbered_adapter(&priv->adap);
    ^
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function
'i2c_platform_remove':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration
of function 'i2c_del_adapter' [-Werror=implicit-function-declaration]
i2c_del_adapter(&priv->adap);

Signed-off-by: Ralf Baechle

MIPS: ftrace: Fix a microMIPS build problem

2014-10-24T00:38:33+00:00

Code before the .fixup section needs to have the .insn directive.
This has no side effects on MIPS32/64 but it affects the way microMIPS
loads the address for the return label.

Fixes the following build problem:
mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between
ISA modes; consider recompiling with interlinking enabled.
mips-linux-gnu-ld: final link failed: Bad value
Makefile:819: recipe for target 'vmlinux' failed

The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS:
Disable LL/SC and fix linker bug.")

Signed-off-by: Markos Chandras 
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8117/
Signed-off-by: Ralf Baechle

MIPS: MSP71xx: Fix build error

2014-10-24T00:37:18+00:00

When CONFIG_MIPS_MT_SMP is enabled, the following compilation error
occurs:

arch/mips/pmcs-msp71xx/msp_irq_cic.c:134: error: ‘irq’ undeclared

This code clearly never saw a compiler.
The surrounding code suggests, that 'd->irq' was intended, not
'irq'.

This error was found with vampyr.

Signed-off-by: Stefan Hengelein 
Fixes: d7881fbdf866d7d0 ("MIPS: msp71xx: Convert to new irq_chip functions")
Acked-by: Geert Uytterhoeven 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8116/
Signed-off-by: Ralf Baechle

MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled

2014-10-23T18:05:55+00:00

The malta-amon.c file provides functions to access the YAMON Monitoring
interface to bring up secondary VPEs in case of SMP/CMP. As a
result of which, there is no need to build it if CMP is not used.

Signed-off-by: Markos Chandras 
Reviewed-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/7993/
Signed-off-by: Ralf Baechle

MIPS: Prevent compiler warning from cop2_{save,restore}

2014-10-23T17:58:13+00:00

The no-op cases of cop2_save & cop2_restore lead to the following
warnings being emitted during build with recent versions of gcc (tested
using gcc 4.8.3 from the Mentor Sourcery CodeBench 2014.05 toolchain):

  In file included from ./arch/mips/include/asm/switch_to.h:18:0,
                   from kernel/sched/core.c:78:
  kernel/sched/core.c: In function 'finish_task_switch':
  include/asm-generic/current.h:6:45: warning: value computed is not used [-Wunused-value]
   #define get_current() (current_thread_info()->task)
                                               ^
  ./arch/mips/include/asm/cop2.h:48:32: note: in definition of macro 'cop2_restore'
   #define cop2_restore(r)  do { (r); } while (0)
                                  ^
  include/asm-generic/current.h:7:17: note: in expansion of macro 'get_current'
   #define current get_current()
                   ^
  ./arch/mips/include/asm/switch_to.h:114:16: note: in expansion of macro 'current'
     cop2_restore(current);     \
                  ^
  kernel/sched/core.c:2225:2: note: in expansion of macro 'finish_arch_switch'
    finish_arch_switch(prev);
    ^

Avoid the warning by "using" the value by casting to void.

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7880/
Signed-off-by: Ralf Baechle

MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle

2014-10-23T17:58:05+00:00

The MIPS_CPS_PM and MIPS_CPS_CPUIDLE implementation should depend
on the MIPS_CPS symbol to avoid the following build problem

arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state':
arch/mips/kernel/pm-cps.c:164:26: error: 'cpu_coherent_mask' undeclared
(first use in this function)
cpumask_clear_cpu(cpu, &cpu_coherent_mask);
                            ^
Signed-off-by: Markos Chandras 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/7798/
Signed-off-by: Ralf Baechle

MIPS: idle: Remove leftover __pastwait symbol and its references

2014-10-23T17:24:05+00:00

The __pastwait symbol was only used by the address_is_in_r4k_wait_irqoff
function but this is no longer used since the SMTC removal in commit
b633648c5ad3 ('MIPS: MT: Remove SMTC support'). That symbol also led to
build failures under certain random configuration due to the way the
compiler compiled the r4k_wait_irqoff function. If that function was
called multiple times, the __pastwait symbol was redefined breaking the
build like this:

CHK     include/generated/compile.h
CC      arch/mips/kernel/idle.o
{standard input}: Assembler messages:
{standard input}:527: Error: symbol `__pastwait' is already defined

Link: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1244879922.24479.30.camel%40falcon
Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras 
Patchwork: https://patchwork.linux-mips.org/patch/7791/
Signed-off-by: Ralf Baechle

MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds

2014-10-23T11:52:49+00:00

Fixes the following randconfig build problem:

arch/mips/built-in.o: In function `show_cpuinfo':
proc.c:(.text+0xde84): undefined reference to `get_system_type'
arch/mips/built-in.o: In function `sb1250_setup':
(.init.text+0x428): undefined reference to `get_system_type'
arch/mips/built-in.o: In function `setup_arch':
(.init.text+0x178c): undefined reference to `plat_mem_setup'
Makefile:930: recipe for target 'vmlinux' failed

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8106/
Signed-off-by: Ralf Baechle

MIPS: ptrace.h: Add a missing include

2014-10-23T11:23:08+00:00

Commit a79ebea62010 (MIPS: ptrace: Fix user pt_regs definition,
use in ptrace_{get, set}regs()) converted struct pt_regs to use __u64.
Some userspace applications (e.g. GDB) include this file directly,
and fail to see this type. Fix by including .

The patch fixes the following build failure with GDB 7.8 when using
GLIBC headers created against Linux 3.17:

In file included from /home/aaro/los/work/shared/gdb-7.8/gdb/mips-linux-nat.c:37:0:
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:32:2: error: unknown type name '__u64'
  __u64 regs[32];
  ^
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:35:2: error: unknown type name '__u64'
  __u64 lo;
  ^
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:36:2: error: unknown type name '__u64'
  __u64 hi;
  ^

Fixes: a79ebea62010 ("MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()")
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Aaro Koskinen 
Cc: Alex Smith 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8067/
Signed-off-by: Ralf Baechle