Pull MIPS fixes from Paul Burton:
 "A collection of MIPS fixes:

   - Fill the struct cacheinfo shared_cpu_map field with sensible
     values, notably avoiding issues with perf which was unhappy in the
     absence of these values.

   - A boot fix for Loongson 2E & 2F machines which was fallout from
     some refactoring performed this cycle.

   - A Kconfig dependency fix for the Loongson CPU HWMon driver.

   - A couple of VDSO fixes, ensuring gettimeofday() behaves
     appropriately for kernel configurations that don't include support
     for a clocksource the VDSO can use & fixing the calling convention
     for the n32 & n64 VDSOs which would previously clobber the $gp/$28
     register.

   - A build fix for vmlinuz compressed images which were
     inappropriately building with -fsanitize-coverage despite not being
     part of the kernel proper, then failing to link due to the missing
     __sanitizer_cov_trace_pc() function.

   - A couple of eBPF JIT fixes, including disabling it for MIPS32 due
     to a large number of issues with the code generated there &
     reflecting ISA dependencies in Kconfig to enforce that systems
     which don't support the JIT must include the interpreter"

* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Avoid VDSO ABI breakage due to global register variable
  MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
  MIPS: BPF: Disable MIPS32 eBPF JIT
  MIPS: Prevent link failure with kcov instrumentation
  MIPS: Kconfig: Use correct form for 'depends on'
  mips: Fix gettimeofday() in the vdso library
  MIPS: Fix boot on Fuloong2 systems
  mips: cacheinfo: report shared CPU map

It is completely wrong to check for compile-time MIPS ISA revision in
the body of bpf_int_jit_compile() as it may lead to get MIPS JIT fully
omitted by the CC while the rest system will think that the JIT is
actually present and works [1].
We can check if the selected CPU really supports MIPS eBPF JIT at
configure time and avoid such situations when kernel can be built
without both JIT and interpreter, but with CONFIG_BPF_SYSCALL=y.

[1] https://lore.kernel.org/linux-mips/09d713a59665d745e21d021deeaebe0a@dlink.ru/

Fixes: 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.

Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull MIPS updates from Paul Burton:

 - A set of memblock initialization improvements thanks to Serge Semin,
   tidying up after our conversion from bootmem to memblock back in
   v4.20.

 - Our eBPF JIT the previously supported only MIPS64r2 through MIPS64r5
   is improved to also support MIPS64r6. Support for MIPS32 systems is
   introduced, with the caveat that it only works for programs that
   don't use 64 bit registers or operations - those will bail out & need
   to be interpreted.

 - Improvements to the allocation & configuration of our exception
   vector that should fix issues seen on some platforms using recent
   versions of U-Boot.

 - Some minor improvements to code generated for jump labels, along with
   enabling them by default for generic kernels.

* tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (27 commits)
  mips: Manually call fdt_init_reserved_mem() method
  mips: Make sure dt memory regions are valid
  mips: Perform early low memory test
  mips: Dump memblock regions for debugging
  mips: Add reserve-nomap memory type support
  mips: Use memblock to reserve the __nosave memory range
  mips: Discard post-CMA-init foreach loop
  mips: Reserve memory for the kernel image resources
  MIPS: Remove duplicate EBase configuration
  MIPS: Sync icache for whole exception vector
  MIPS: Always allocate exception vector for MIPSr2+
  MIPS: Use memblock_phys_alloc() for exception vector
  mips: Combine memblock init and memory reservation loops
  mips: Discard rudiments from bootmem_init
  mips: Make sure kernel .bss exists in boot mem pool
  mips: vdso: drop unnecessary cc-ldoption
  Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices"
  MIPS: generic: Enable CONFIG_JUMP_LABEL
  MIPS: jump_label: Use compact branches for >= r6
  MIPS: jump_label: Remove redundant nops
  ...

Fix sparse warning:

arch/mips/net/ebpf_jit.c:196:5: warning:
 symbol 'ebpf_to_mips_reg' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently MIPS32 supports a JIT for classic BPF only, not extended BPF.
This patch adds JIT support for extended BPF on MIPS32, so code is
actually JIT'ed instead of being only interpreted. Instructions with
64-bit operands are not supported at this point.
We can delete classic BPF because the kernel will translate classic BPF
programs into extended BPF and JIT them, eliminating the need for
classic BPF.

Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: kafai@fb.com
Cc: songliubraving@fb.com
Cc: yhs@fb.com
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: open list:MIPS <linux-mips@linux-mips.org>
Cc: open list <linux-kernel@vger.kernel.org>

Currently eBPF support is available on MIPS64R2 only. Use MIPS64R6
variants of instructions like multiply, divide, movn, movz so eBPF
can run on the newer ISA. Also, we only need to check ISA revision
before JIT'ing code, because we know the CPU is running a 64-bit
kernel because eBPF JIT is only included in kernels with CONFIG_64BIT=y
due to Kconfig dependencies.

Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: kafai@fb.com
Cc: songliubraving@fb.com
Cc: yhs@fb.com
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: open list:MIPS <linux-mips@linux-mips.org>
Cc: open list <linux-kernel@vger.kernel.org>

The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.

The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.

Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>