LLVM-built Linux triggered a boot hangup with KASLR enabled.
arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.
Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.
Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Patches that introduced NT_FILE and NT_SIGINFO notes back in 2012 had taken care of native (fs/binfmt_elf.c) and compat (fs/compat_binfmt_elf.c) coredumps; unfortunately, compat on mips (which does not go through the usual compat_binfmt_elf.c) had not been noticed. As the result, both N32 and O32 coredumps on 64bit mips kernels have those sections malformed enough to confuse the living hell out of all gdb and readelf versions (up to and including the tip of binutils-gdb.git). Longer term solution is to make both O32 and N32 compat use the regular compat_binfmt_elf.c, but that's too much for backports. The minimal solution is to do in arch/mips/kernel/binfmt_elf[on]32.c the same thing those patches have done in fs/compat_binfmt_elf.c Cc: stable@kernel.org # v3.7+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit b0a0c2615f6f ("epoll: wire up syscall epoll_pwait2") wired up
the 64 bit syscall instead of the compat variant in a couple of places.
Fixes: b0a0c2615f6f ("epoll: wire up syscall epoll_pwait2")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split off from prev patch in the series that implements the syscall. Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe: "This sits on top of of the core entry/exit and x86 entry branch from the tip tree, which contains the generic and x86 parts of this work. Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL. With that done, we can get rid of JOBCTL_TASK_WORK from task_work and signal.c, and also remove a deadlock work-around in io_uring around knowing that signal based task_work waking is invoked with the sighand wait queue head lock. The motivation for this work is to decouple signal notify based task_work, of which io_uring is a heavy user of, from sighand. The sighand lock becomes a huge contention point, particularly for threaded workloads where it's shared between threads. Even outside of threaded applications it's slower than it needs to be. Roman Gershman <romger@amazon.com> reported that his networked workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all spent hammering on the sighand lock, showing 57% of the CPU time there [1]. There are further cleanups possible on top of this. One example is TIF_PATCH_PENDING, where a patch already exists to use TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more consolidation, but the work stands on its own as well" [1] https://github.com/axboe/liburing/issues/215 * tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits) io_uring: remove 'twa_signal_ok' deadlock work-around kernel: remove checking for TIF_NOTIFY_SIGNAL signal: kill JOBCTL_TASK_WORK io_uring: JOBCTL_TASK_WORK is no longer used by task_work task_work: remove legacy TWA_SIGNAL path sparc: add support for TIF_NOTIFY_SIGNAL riscv: add support for TIF_NOTIFY_SIGNAL nds32: add support for TIF_NOTIFY_SIGNAL ia64: add support for TIF_NOTIFY_SIGNAL h8300: add support for TIF_NOTIFY_SIGNAL c6x: add support for TIF_NOTIFY_SIGNAL alpha: add support for TIF_NOTIFY_SIGNAL xtensa: add support for TIF_NOTIFY_SIGNAL arm: add support for TIF_NOTIFY_SIGNAL microblaze: add support for TIF_NOTIFY_SIGNAL hexagon: add support for TIF_NOTIFY_SIGNAL csky: add support for TIF_NOTIFY_SIGNAL openrisc: add support for TIF_NOTIFY_SIGNAL sh: add support for TIF_NOTIFY_SIGNAL um: add support for TIF_NOTIFY_SIGNAL ...
Pull MIPS updates from Thomas Bogendoerfer:
- enable GCOV
- rework setup of protection map
- add support for more MSCC platforms
- add sysfs boardinfo for Loongson64
- enable KASLR for Loogson64
- add reset controller for BCM63xx
- cleanups and fixes
* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
mips: fix Section mismatch in reference
MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
MAINTAINERS: Remove JZ4780 DMA driver entry
MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
MIPS: Octeon: irq: Alloc desc before configuring IRQ
MIPS: mm: Add back define for PAGE_SHARED
MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
mips: lib: uncached: fix non-standard usage of variable 'sp'
MIPS: DTS: img: Fix schema warnings for pwm-leds
MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
MIPS: Move memblock_dump_all() to the end of setup_arch()
MIPS: SMP-CPS: Add support for irq migration when CPU offline
MIPS: OCTEON: Don't add kernel sections into memblock allocator
MIPS: Don't round up kernel sections size for memblock_add()
MIPS: Enable GCOV
MIPS: configs: drop unused BACKLIGHT_GENERIC option
MIPS: Loongson64: Fix up reserving kernel memory range
MIPS: mm: Remove unused is_aligned_hugepage_range
MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
...
Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
Most platforms do not need to do synci instruction operations when synci_step is 0. But for example, the synci implementation on Loongson64 platform has some changes. On the one hand, it ensures that the memory access instructions have been completed. On the other hand, it guarantees that all prefetch instructions need to be fetched again. And its address information is useless. Thus, only one synci operation is required when synci_step is 0 on Loongson64 platform. I guess that some other platforms have similar implementations on synci, so add judgment conditions in `while` to ensure that at least all platforms perform synci operations once. For those platforms that do not need synci, they just do one more operation similar to nop. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In order to get more memblock configuration with memblock=debug in the boot cmdline, move memblock_dump_all() to the end of setup_arch(), this can help us to get dmi_setup() and resource_init() memblock info, at least for now. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently we won't migrate irqs when offline CPUs, which has been implemented on most architectures. That will lead to some devices work incorrectly if the bound cores are offline. While that can be easily supported by enabling GENERIC_IRQ_MIGRATION. But i don't pretty known the reason it was not supported on all MIPS platforms. This patch add the support for irq migration on MIPS CPS platform, and it's tested on the interAptiv processor. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>