linux.git/arch/mips/include, branch v5.10 Linux kernel source tree arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed 2020-11-16T15:57:18+00:00 Arnd Bergmann arnd@arndb.de 2020-11-11T16:52:58+00:00 cef397038167ac15d085914493d6c86385773709 Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
treewide: Convert macro and uses of __section(foo) to __section("foo") 2020-10-25T21:51:49+00:00 Joe Perches joe@perches.com 2020-10-22T02:36:07+00:00 33def8498fdde180023444b08e12b72a9efed41d Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2020-10-23T18:17:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-23T18:17:56+00:00 f9a705ad1c077ec2872c641f0db9c0d5b4a097bb Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ... 
Pull KVM updates from Paolo Bonzini:
 "For x86, there is a new alternative and (in the future) more scalable
  implementation of extended page tables that does not need a reverse
  map from guest physical addresses to host physical addresses.

  For now it is disabled by default because it is still lacking a few of
  the existing MMU's bells and whistles. However it is a very solid
  piece of work and it is already available for people to hammer on it.

  Other updates:

  ARM:
   - New page table code for both hypervisor and guest stage-2
   - Introduction of a new EL2-private host context
   - Allow EL2 to have its own private per-CPU variables
   - Support of PMU event filtering
   - Complete rework of the Spectre mitigation

  PPC:
   - Fix for running nested guests with in-kernel IRQ chip
   - Fix race condition causing occasional host hard lockup
   - Minor cleanups and bugfixes

  x86:
   - allow trapping unknown MSRs to userspace
   - allow userspace to force #GP on specific MSRs
   - INVPCID support on AMD
   - nested AMD cleanup, on demand allocation of nested SVM state
   - hide PV MSRs and hypercalls for features not enabled in CPUID
   - new test for MSR_IA32_TSC writes from host and guest
   - cleanups: MMU, CPUID, shared MSRs
   - LAPIC latency optimizations ad bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
  kvm: x86/mmu: NX largepage recovery for TDP MMU
  kvm: x86/mmu: Don't clear write flooding count for direct roots
  kvm: x86/mmu: Support MMIO in the TDP MMU
  kvm: x86/mmu: Support write protection for nesting in tdp MMU
  kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
  kvm: x86/mmu: Support dirty logging for the TDP MMU
  kvm: x86/mmu: Support changed pte notifier in tdp MMU
  kvm: x86/mmu: Add access tracking for tdp_mmu
  kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
  kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
  kvm: x86/mmu: Add TDP MMU PF handler
  kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
  kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
  KVM: Cache as_id in kvm_memory_slot
  kvm: x86/mmu: Add functions to handle changed TDP SPTEs
  kvm: x86/mmu: Allocate and free TDP MMU roots
  kvm: x86/mmu: Init / Uninit the TDP MMU
  kvm: x86/mmu: Introduce tdp_iter
  KVM: mmu: extract spte.h and spte.c
  KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
  ...
Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2020-10-16T19:40:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-16T19:40:55+00:00 09a31a7e3723afd79022d5d3ff3634c2630c2eeb Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ... 
Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping 2020-10-15T21:43:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-15T21:43:29+00:00 5a32c3413d3340f90c82c84b375ad4b335a59f28 Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ... 
Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...
Merge branch 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2020-10-12T23:37:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-12T23:37:13+00:00 e18afa5bfa4a2f0e07b0864370485df701dacbc1 Pull compat quotactl cleanups from Al Viro: "More Christoph's compat cleanups: quotactl(2)" * 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: quota: simplify the quotactl compat handling compat: add a compat_need_64bit_alignment_fixup() helper compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h> 
Pull compat quotactl cleanups from Al Viro:
 "More Christoph's compat cleanups: quotactl(2)"

* 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  quota: simplify the quotactl compat handling
  compat: add a compat_need_64bit_alignment_fixup() helper
  compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2020-10-12T23:24:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-12T23:24:13+00:00 c90578360c92c71189308ebc71087197080e94c3 Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument 
Pull copy_and_csum cleanups from Al Viro:
 "Saner calling conventions for csum_and_copy_..._user() and friends"

[ Removing 800+ lines of code and cleaning stuff up is good  - Linus ]

* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ppc: propagate the calling conventions change down to csum_partial_copy_generic()
  amd64: switch csum_partial_copy_generic() to new calling conventions
  sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
  xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
  mips: propagate the calling convention change down into __csum_partial_copy_..._user()
  mips: __csum_partial_copy_kernel() has no users left
  mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
  sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
  i386: propagate the calling conventions change down to csum_partial_copy_generic()
  sh: propage the calling conventions change down to csum_partial_copy_generic()
  m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
  arm: propagate the calling convention changes down to csum_partial_copy_from_user()
  alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
  saner calling conventions for csum_and_copy_..._user()
  csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
  csum_partial_copy_nocheck(): drop the last argument
  unify generic instances of csum_partial_copy_nocheck()
  icmp_push_reply(): reorder adding the checksum up
  skb_copy_and_csum_bits(): don't bother with the last argument
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit 2020-10-12T10:05:40+00:00 Thomas Bogendoerfer tsbogend@alpha.franken.de 2020-10-09T12:26:48+00:00 20cc5b649d9978494fb29259763c2505f6acc3c0 MIPS_CPU_BP_GHIST is only set two times and more or less immediately used in cpu-probe.c itself. Remove this option to make room in options word. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
MIPS_CPU_BP_GHIST is only set two times and more or less immediately
used in cpu-probe.c itself. Remove this option to make room in options
word.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: replace add_memory_region with memblock 2020-10-12T10:01:36+00:00 Thomas Bogendoerfer tsbogend@alpha.franken.de 2020-10-09T12:14:46+00:00 e7ae8d174eec0b3b9de92b76abc15f3f53b98f1c add_memory_region was the old interface for registering memory and was already changed to used memblock internaly. Replace it by directly calling memblock functions. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
add_memory_region was the old interface for registering memory and
was already changed to used memblock internaly. Replace it by
directly calling memblock functions.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: Loongson64: Clean up numa.c 2020-10-12T09:22:58+00:00 Tiezhu Yang yangtiezhu@loongson.cn 2020-10-10T23:47:52+00:00 73826d604bbf31328108c6c2a93a7a8a13a74371 (1) Replace nid_to_addroffset() with nid_to_addrbase() and then remove the related useless code. (2) Since end_pfn = start_pfn + node_psize, use "node_psize" instead of "end_pfn - start_pfn" to avoid the redundant calculation. (3) After commit 6fbde6b492df ("MIPS: Loongson64: Move files to the top-level directory"), CONFIG_ZONE_DMA32 is always set for Loongson64 due to MACH_LOONGSON64 selects ZONE_DMA32, so no need to use ifdef any more, just remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
(1) Replace nid_to_addroffset() with nid_to_addrbase() and then remove the
related useless code.

(2) Since end_pfn = start_pfn + node_psize, use "node_psize" instead of
"end_pfn - start_pfn" to avoid the redundant calculation.

(3) After commit 6fbde6b492df ("MIPS: Loongson64: Move files to the
top-level directory"), CONFIG_ZONE_DMA32 is always set for Loongson64
due to MACH_LOONGSON64 selects ZONE_DMA32, so no need to use ifdef any
more, just remove it.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>