linux.git/arch/mips/include/asm/netlogic, branch v3.15

MIPS: Netlogic: Remove XLR early serial setup

2014-01-24T21:39:50+00:00

The early serial code is not needed because we already have early
printk support provided by common/earlycons.c

This change also fixes the following build error that occurs when
CONFIG_SERIAL_8250 is not configured for Netlogic XLR boards:

arch/mips/built-in.o: In function `nlm_early_serial_setup':
setup.c:(.init.text+0x274): undefined reference to `early_serial_setup'
make: *** [vmlinux] Error 1

Reported-by: Markos Chandras 
Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6083/

MIPS: Netlogic: XLP9XX USB support

2014-01-24T21:39:49+00:00

XLP9XX has a USB 3.0 controller on-chip with 2 xHCI ports. The USB
block is similar to the one on XLP2XX, so update usb-init-xlp2.c
to handle XLP9XX as well.

Signed-off-by: Ganesan Ramalingam 
Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6285/

MIPS: PCI: Netlogic XLP9XX support

2014-01-24T21:39:49+00:00

Add PCI support for Netlogic XLP9XX. The PCI registers and
SoC bus numbers have changed in XLP9XX.

Also skip a few (bus,dev,fn) combinations which have issues when
read.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6284/

MIPS: Netlogic: Add cpu to node mapping for XLP9XX

2014-01-24T21:39:49+00:00

XLP9XX has 20 cores per node, opposed to 8 on earlier XLP8XX.
Update code that calculates node id from cpu id to handle this.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6283/

MIPS: Netlogic: XLP9XX bridge and DRAM code

2014-01-24T21:39:49+00:00

Update bridge code. Add code to the XLP9XX registers for DRAM
size, limit and node when running on XLPXX

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6282/

MIPS: Netlogic: XLP9XX UART offset

2014-01-24T21:39:48+00:00

Update IO offset of the early console UART.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6281/

MIPS: Netlogic: SYS block updates of XLP9XX

2014-01-24T21:39:48+00:00

Add the SYS block registers for XLP9XX, most of them have changed.
The wakeup sequence has been updated to set the coherent mode from
the main thread rather than the woken up thread.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6280/

MIPS: Netlogic: XLP9XX PIC updates

2014-01-24T21:39:48+00:00

Functions for the XLP9XX interrupt table entry format and other PIC
register changes.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6279/

MIPS: Netlogic: update iomap.h for XLP9XX

2014-01-24T21:39:48+00:00

Most IO block offsets have changed in XLP9XX. Update iomap.h to add the
new addresses of different SoC blocks like PIC, SYS, UART etc. that are
needed by the base code.

On XLP9xx, the SoC blocks of other nodes are seen on a PCI bus
corresponding to the node. Update iomap code to reflect this.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6277/

MIPS: Netlogic: Identify XLP 9XX chip

2014-01-24T21:39:48+00:00

Adds processor ID of XLP 9XX to asm/cpu.h.  Update netlogic/xlp-hal/xlp.h
to add cpu_is_xlp9xx() and to update cpu_is_xlpii() to support XLP 9XX.

Signed-off-by: Jayachandran C 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6274/