linux.git/arch/mips/boot, branch v5.6 Linux kernel source tree MIPS: DTS: CI20: fix interrupt for pcf8563 RTC 2020-03-07T08:54:24+00:00 H. Nikolaus Schaller hns@goldelico.com 2020-03-06T17:28:30+00:00 130ab8819d81bd96f1a71e8461a8f73edf1fbe82 Interrupts should not be specified by interrupt line but by gpio parent and reference. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
Interrupts should not be specified by interrupt line but by
gpio parent and reference.

Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: DTS: CI20: fix PMU definitions for ACT8600 2020-03-07T08:53:21+00:00 H. Nikolaus Schaller hns@goldelico.com 2020-03-06T17:27:58+00:00 e8d87a0b822d4b3d9a94a5da915f93aa1b674c93 There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state. Fix DT to match the latest act8865-regulator bindings. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
There is a ACT8600 on the CI20 board and the bindings of the
ACT8865 driver have changed without updating the CI20 device
tree. Therefore the PMU can not be probed successfully and
is running in power-on reset state.

Fix DT to match the latest act8865-regulator bindings.

Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: ingenic: DTS: Fix watchdog nodes 2020-02-19T18:52:35+00:00 Paul Cercueil paul@crapouillou.net 2020-02-11T14:53:37+00:00 11479e8e3cd896673a15af21cd0f145a4752f01a The devicetree ABI was broken on purpose by commit 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver"), and commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided by TCU driver"). The commit message of the latter explains why the ABI was broken. However, the current devicetree files were not updated to the new ABI described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt, so the watchdog driver would not probe. Fix this problem by updating the watchdog nodes to comply with the new ABI. Fixes: 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com> Cc: od@zcrc.me Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.5+ 
The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.

However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.

Fix this problem by updating the watchdog nodes to comply with the new
ABI.

Fixes: 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Cc: od@zcrc.me
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.5+
MIPS: X1000: Fix clock of watchdog node. 2020-02-19T18:49:44+00:00 周琰杰 (Zhou Yanjie) zhouyanjie@wanyeetech.com 2020-02-16T12:10:28+00:00 eb41113870c94dd7e519c69184efc171b7327699 The devicetree ABI was broken on purpose by commit 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver"), and commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided by TCU driver"). The commit message of the latter explains why the ABI was broken. However, the current devicetree files were not updated to the new ABI described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt, so the watchdog driver would not probe. Fix this problem by updating the clock of watchdog node from "&cgu X1000_CLK_RTCLK" to "&tcu TCU_CLK_WDT" to comply with the new ABI. Fixes: 7a16ccd300c2 ("[v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support."). Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: paul@crapouillou.net Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: ralf@linux-mips.org Cc: sernia.zhou@foxmail.com Cc: zhenwenjin@gmail.com Cc: dongsheng.qiu@ingenic.com 
The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.

However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.

Fix this problem by updating the clock of watchdog node from
"&cgu X1000_CLK_RTCLK" to "&tcu TCU_CLK_WDT" to comply with the new
ABI.

Fixes: 7a16ccd300c2 ("[v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support.").
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: paul@crapouillou.net
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: ralf@linux-mips.org
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: dongsheng.qiu@ingenic.com
kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-03T16:53:07+00:00 Masahiro Yamada masahiroy@kernel.org 2020-02-01T16:49:24+00:00 5f2fb52fac15a8a8e10ce020dd532504a8abfc4e In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

  always       ->  always-y
  hostprogs-y  ->  hostprogs

So, scripts/Makefile will look like this:

  always-$(CONFIG_BUILD_BIN2C) += ...
  always-$(CONFIG_KALLSYMS)    += ...
      ...
  hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2020-01-31T19:28:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-31T19:28:31+00:00 c5951e7c8ee5cb04b8b41c32bf567b90117a2124 Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ... 
Pull MIPS changes from Paul Burton:
 "Nothing too big or scary in here:

   - Support mremap() for the VDSO, primarily to allow CRIU to restore
     the VDSO to its checkpointed location.

   - Restore the MIPS32 cBPF JIT, after having reverted the enablement
     of the eBPF JIT for MIPS32 systems in the 5.5 cycle.

   - Improve cop0 counter synchronization behaviour whilst onlining CPUs
     by running with interrupts disabled.

   - Better match FPU behaviour when emulating multiply-accumulate
     instructions on pre-r6 systems that implement IEEE754-2008 style
     MACs.

   - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
     to take advantage of instructions introduced by r2.

   - Support for the Ingenic X1000 SoC & the really nice little CU Neo
     development board that's using it.

   - Support for WMAC on GARDENA Smart Gateway devices.

   - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
     preparation for introducing IP35 (Origin 3*) support.

   - Various Kconfig & Makefile cleanups"

* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
  MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
  MIPS: Loongson64: Disable exec hazard
  MIPS: Loongson64: Bump ISA level to MIPSR2
  MIPS: Make DIEI support as a config option
  MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
  MIPS: asm: local: add barriers for Loongson
  MIPS: Loongson64: Select mac2008 only feature
  MIPS: Add MAC2008 Support
  Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
  MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
  MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
  MIPS: generic: don't unconditionally select PINCTRL
  MIPS: don't explicitly select LIBFDT in Kconfig
  MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
  MIPS: SGI-IP30: Check for valid pointer before using it
  MIPS: syscalls: fix indentation of the 'SYSNR' message
  MIPS: boot: fix typo in 'vmlinux.lzma.its' target
  MIPS: fix indentation of the 'RELOCS' message
  dt-bindings: Document loongson vendor-prefix
  MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
  ...
MIPS: boot: fix typo in 'vmlinux.lzma.its' target 2020-01-20T23:39:06+00:00 Alexander Lobakin alobakin@dlink.ru 2020-01-17T14:02:08+00:00 16202c09577f3d0c533274c0410b7de05fb0d458 Commit 92b34a976348 ("MIPS: boot: add missing targets for vmlinux.*.its") fixed constant rebuild of *.its files on every make invocation, but due to typo ("lzmo") it made no sense for vmlinux.lzma.its. Fixes: 92b34a976348 ("MIPS: boot: add missing targets for vmlinux.*.its") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> [paulburton@kernel.org: s/invokation/invocation/] Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org 
Commit 92b34a976348 ("MIPS: boot: add missing targets for vmlinux.*.its")
fixed constant rebuild of *.its files on every make invocation, but due
to typo ("lzmo") it made no sense for vmlinux.lzma.its.

Fixes: 92b34a976348 ("MIPS: boot: add missing targets for vmlinux.*.its")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
[paulburton@kernel.org: s/invokation/invocation/]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
MIPS: Ingenic: Add missing nodes for X1000 and CU1000-Neo. 2020-01-15T18:45:45+00:00 周琰杰 (Zhou Yanjie) zhouyanjie@wanyeetech.com 2020-01-14T17:03:47+00:00 0ba96b344a7fbc6750459ba3b619053850867a2c Add I2C0/I2C1/I2C2 nodes for X1000 and add I2C0, ADS7830, MSC1, AP6212A, wlan_pwrseq nodes for CU1000-Neo. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: robh+dt@kernel.org Cc: paul.burton@mips.com Cc: jhogan@kernel.org Cc: mark.rutland@arm.com Cc: syq@debian.org Cc: ralf@linux-mips.org Cc: rick.tyliu@ingenic.com Cc: jason@lakedaemon.net Cc: keescook@chromium.org Cc: geert+renesas@glider.be Cc: krzk@kernel.org Cc: paul@crapouillou.net Cc: prasannatsmkumar@gmail.com Cc: sernia.zhou@foxmail.com Cc: zhenwenjin@gmail.com Cc: ebiederm@xmission.com 
Add I2C0/I2C1/I2C2 nodes for X1000 and add I2C0, ADS7830,
MSC1, AP6212A, wlan_pwrseq nodes for CU1000-Neo.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: syq@debian.org
Cc: ralf@linux-mips.org
Cc: rick.tyliu@ingenic.com
Cc: jason@lakedaemon.net
Cc: keescook@chromium.org
Cc: geert+renesas@glider.be
Cc: krzk@kernel.org
Cc: paul@crapouillou.net
Cc: prasannatsmkumar@gmail.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: ebiederm@xmission.com
MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1 2020-01-15T00:02:34+00:00 Reto Schneider reto.schneider@husqvarnagroup.com 2020-01-14T08:48:06+00:00 e8c192011c920517e5578d51c7aff0ecadd25de3 The radio module asserts CTS when its RX buffer has 10 bytes left. Putting just 8 instead of 16 bytes into the UART1 TX buffer on the Linux side ensures to not overflow the RX buffer on the radio module side. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org 
The radio module asserts CTS when its RX buffer has 10 bytes left.
Putting just 8 instead of 16 bytes into the UART1 TX buffer on the Linux
side ensures to not overflow the RX buffer on the radio module side.

Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
MIPS: ralink: dts: gardena_smart_gateway_mt7688: Enable WMAC 2020-01-15T00:02:32+00:00 Reto Schneider reto.schneider@husqvarnagroup.com 2020-01-14T08:48:05+00:00 a5d193cb88cf6c5bfc771db6f34eebca51fd767a This patch enables the WMAC controller on the GARDENA smart Gateway and configures the board specific factory EEPROM setting for this driver. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paul Burton <paul.burton@mips.com> Cc: John Crispin <john@phrozen.org> Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org 
This patch enables the WMAC controller on the GARDENA smart Gateway and
configures the board specific factory EEPROM setting for this driver.

Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org