linux.git/arch/mips/boot, branch v5.2-rc4 Linux kernel source tree treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30T18:26:32+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-27T06:55:01+00:00 2874c5fd284268364ece81a7bd936f3c8168e567 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2019-03-11T00:48:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-11T00:48:21+00:00 ffd602eb4693bbb49b301fa059b109bbdebf9524 Pull Kbuild updates from Masahiro Yamada: - do not generate unneeded top-level built-in.a - let git ignore O= directory entirely - optimize scripts/kallsyms slightly - exclude DWARF info from *.s regardless of config options - fix GCC toolchain search path for Clang to prepare ld.lld support - do not generate modules.order when CONFIG_MODULES is disabled - simplify single target rules and remove VPATH for external module build - allow to add optional flags to dpkg-buildpackage when building deb-pkg - move some compiler option tests from Makefile to Kconfig - various Makefile cleanups * tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: remove scripts/basic/% build target kbuild: use -Werror=implicit-... instead of -Werror-implicit-... kbuild: clean up scripts/gcc-version.sh kbuild: remove cc-version macro kbuild: update comment block of scripts/clang-version.sh kbuild: remove commented-out INITRD_COMPRESS kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig kbuild: [bin]deb-pkg: add DPKG_FLAGS variable kbuild: move ".config not found!" message from Kconfig to Makefile kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing kbuild: simplify single target rules kbuild: remove empty rules for makefiles kbuild: make -r/-R effective in top Makefile for old Make versions kbuild: move tools_silent to a more relevant place kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig kbuild: refactor cc-cross-prefix implementation kbuild: hardcode genksyms path and remove GENKSYMS variable scripts/gdb: refactor rules for symlink creation kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target scripts/gdb: do not descend into scripts/gdb from scripts ... 
Pull Kbuild updates from Masahiro Yamada:

 - do not generate unneeded top-level built-in.a

 - let git ignore O= directory entirely

 - optimize scripts/kallsyms slightly

 - exclude DWARF info from *.s regardless of config options

 - fix GCC toolchain search path for Clang to prepare ld.lld support

 - do not generate modules.order when CONFIG_MODULES is disabled

 - simplify single target rules and remove VPATH for external module
   build

 - allow to add optional flags to dpkg-buildpackage when building
   deb-pkg

 - move some compiler option tests from Makefile to Kconfig

 - various Makefile cleanups

* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: remove scripts/basic/% build target
  kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
  kbuild: clean up scripts/gcc-version.sh
  kbuild: remove cc-version macro
  kbuild: update comment block of scripts/clang-version.sh
  kbuild: remove commented-out INITRD_COMPRESS
  kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
  kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
  kbuild: move ".config not found!" message from Kconfig to Makefile
  kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
  kbuild: simplify single target rules
  kbuild: remove empty rules for makefiles
  kbuild: make -r/-R effective in top Makefile for old Make versions
  kbuild: move tools_silent to a more relevant place
  kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
  kbuild: refactor cc-cross-prefix implementation
  kbuild: hardcode genksyms path and remove GENKSYMS variable
  scripts/gdb: refactor rules for symlink creation
  kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
  scripts/gdb: do not descend into scripts/gdb from scripts
  ...
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2019-03-05T19:28:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-05T19:28:25+00:00 d9862cfbe2099deb83f0e9c1932c91f2d9c50464 Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ... 
Pull MIPS updates from Paul Burton:

 - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance
   when running on a CPU such as the I6500 that supports these.

 - Enable huge page support for MIPS64r6.

 - Optimize post-DMA cache sync by removing that code entirely for
   kernel configurations in which we know it won't be needed.

 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.

 - The ath79 platform migrates to devicetree.

 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

 - The ingenic/jz4740 platform gains support for appended devicetrees.

 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.

* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
  MIPS: lantiq: Remove separate GPHY Firmware loader
  MIPS: ingenic: Add support for appended devicetree
  MIPS: SGI-IP27: rework HUB interrupts
  MIPS: SGI-IP27: do boot CPU init later
  MIPS: SGI-IP27: do xtalk scanning later
  MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
  MIPS: SGI-IP27: clean up bridge access and header files
  MIPS: SGI-IP27: get rid of volatile and hubreg_t
  MIPS: irq: Allocate accurate order pages for irq stack
  MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
  MIPS: eBPF: Remove REG_32BIT_ZERO_EX
  MIPS: eBPF: Always return sign extended 32b values
  MIPS: CM: Fix indentation
  MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
  MIPS: OCTEON: program rx/tx-delay always from DT
  MIPS: OCTEON: delete board-specific link status
  MIPS: OCTEON: don't lie about interface type of CN3005 board
  MIPS: OCTEON: warn if deprecated link status is being used
  MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
  MIPS: Delete unused flush_cache_sigtramp()
  ...
MIPS: OCTEON: program rx/tx-delay always from DT 2019-02-07T23:22:38+00:00 Aaro Koskinen aaro.koskinen@iki.fi 2019-02-04T22:41:49+00:00 3d2521810ec990b67b4d0e1f9aa5380e7b3c6a18 Program rx/tx-delay always from DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org 
Program rx/tx-delay always from DT.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
MIPS: OCTEON: add fixed-link nodes to in-kernel device tree 2019-02-07T23:22:30+00:00 Aaro Koskinen aaro.koskinen@iki.fi 2019-02-04T22:41:45+00:00 565485b8b5745946a303673873acd91de63b0657 Currently OCTEON ethernet falls back to phyless operation on boards where we have no known PHY address or a fixed-link node. Add fixed-link support for boards that need it, so we can clean up the platform code and ethernet driver from some legacy code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org 
Currently OCTEON ethernet falls back to phyless operation on
boards where we have no known PHY address or a fixed-link node.
Add fixed-link support for boards that need it, so we can clean up
the platform code and ethernet driver from some legacy code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
MIPS: Use lower case for addresses in nexys4ddr.dts 2019-02-04T19:55:49+00:00 Paul Burton paul.burton@mips.com 2019-02-04T19:53:53+00:00 047f2d941b8b24cadd6a4a09e606b7f41188ba3e DTC introduced an i2c_bus_reg check in v1.4.7, used since Linux v4.20, which complains about upper case addresses used in the unit name. nexys4ddr.dts names an I2C device node "ad7420@4B", leading to: arch/mips/boot/dts/xilfpga/nexys4ddr.dts:109.16-112.8: Warning (i2c_bus_reg): /i2c@10A00000/ad7420@4B: I2C bus unit address format error, expected "4b" Fix this by switching to lower case addresses throughout the file, as is *mostly* the case in the file already & fairly standard throughout the tree. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: stable@vger.kernel.org # v4.20+ Cc: linux-mips@vger.kernel.org 
DTC introduced an i2c_bus_reg check in v1.4.7, used since Linux v4.20,
which complains about upper case addresses used in the unit name.

nexys4ddr.dts names an I2C device node "ad7420@4B", leading to:

  arch/mips/boot/dts/xilfpga/nexys4ddr.dts:109.16-112.8: Warning
    (i2c_bus_reg): /i2c@10A00000/ad7420@4B: I2C bus unit address format
    error, expected "4b"

Fix this by switching to lower case addresses throughout the file, as is
*mostly* the case in the file already & fairly standard throughout the
tree.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: linux-mips@vger.kernel.org
kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^) 2019-01-28T00:11:17+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-01-17T10:02:43+00:00 afa974b771281fd89e8fdcb71152152f17fb8303 In Kbuild, if_changed and friends must have FORCE as a prerequisite. Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common idiom to get the names of all the prerequisites except phony targets. Add real-prereqs as a shorthand. Note: We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may include auto-generated dependencies from the .*.cmd file when a single object module is changed into a multi object module. Refer to commit 69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some comment to avoid accidental breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> 
In Kbuild, if_changed and friends must have FORCE as a prerequisite.

Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.

Add real-prereqs as a shorthand.

Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
DTS: CI20: Fix bugs in ci20's device tree. 2019-01-25T19:19:37+00:00 Zhou Yanjie zhouyanjie@cduestc.edu.cn 2019-01-24T18:22:15+00:00 1ca1c87f91d9dc50d6a38e2177b2032996e7901c According to the Schematic, the hardware of ci20 leads to uart3, but not to uart2. Uart2 is miswritten in the original code. Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips <linux-mips@vger.kernel.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Cc: devicetree@vger.kernel.org Cc: robh+dt@kernel.org Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: mark.rutland@arm.com Cc: malat@debian.org Cc: ezequiel@collabora.co.uk Cc: ulf.hansson@linaro.org Cc: syq <syq@debian.org> Cc: jiaxun.yang <jiaxun.yang@flygoat.com> 
According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
MIPS: DTS: jz4740: Correct interrupt number of DMA core 2019-01-25T19:16:33+00:00 Paul Cercueil paul@crapouillou.net 2019-01-25T18:12:45+00:00 70999ec1c9d3f783a7232973cfc26971e5732758 The interrupt number set in the devicetree node of the DMA driver was wrong. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org 
The interrupt number set in the devicetree node of the DMA driver was
wrong.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org