linux.git/arch/mips/boot, branch v5.17

MIPS: DTS: CI20: fix how ddc power is enabled

2022-02-09T12:58:26+00:00

Originally we proposed a new hdmi-5v-supply regulator reference
for CI20 device tree but that was superseded by a better idea to use
the already defined "ddc-en-gpios" property of the "hdmi-connector".

Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
been applied to v5.17-rc1, we add this on top.

Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup")
Signed-off-by: H. Nikolaus Schaller 
Reviewed-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer

Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2022-01-19T09:15:19+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...

kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}

2022-01-13T17:54:05+00:00

GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.

There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.

To limit the use of such broken compressed files, this commit renames
the existing macros as follows:

  cmd_bzip2   --> cmd_bzip2_with_size
  cmd_lzma    --> cmd_lzma_with_size
  cmd_lzo     --> cmd_lzo_with_size
  cmd_lz4     --> cmd_lz4_with_size
  cmd_xzkern  --> cmd_xzkern_with_size
  cmd_zstd22  --> cmd_zstd22_with_size

To keep the decompressors working, I updated the following Makefiles
accordingly:

  arch/arm/boot/compressed/Makefile
  arch/h8300/boot/compressed/Makefile
  arch/mips/boot/compressed/Makefile
  arch/parisc/boot/compressed/Makefile
  arch/s390/boot/compressed/Makefile
  arch/sh/boot/compressed/Makefile
  arch/x86/boot/compressed/Makefile

I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.

I did not touch the following:

  arch/arc/boot/Makefile
  arch/arm64/boot/Makefile
  arch/csky/boot/Makefile
  arch/mips/boot/Makefile
  arch/riscv/boot/Makefile
  arch/sh/boot/Makefile
  kernel/Makefile

This means those Makefiles will stop appending the size data.

I dropped the 'override size_append' hack from usr/Makefile.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Nicolas Schier

MIPS: bmips: Add support PCIe controller device nodes

2022-01-11T10:55:41+00:00

For Broadcom STB PCIe HW. The 7425 and 7435 are MIPs-based SOCs.  Not much
difference between the two for the DT properties except that they have
slightly different PCIe interrupt assignments.

Signed-off-by: Jim Quinlan 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer

MIPS: compressed: Fix build with ZSTD compression

2022-01-09T14:43:07+00:00

Fix the following build issues:

mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
 decompress.c:(.text.FSE_buildDTable_internal+0x2cc): undefined reference to `__clzdi2'
   mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `BIT_initDStream':
   decompress.c:(.text.BIT_initDStream+0x7c): undefined reference to `__clzdi2'
   mips64el-linux-ld: decompress.c:(.text.BIT_initDStream+0x158): undefined reference to `__clzdi2'
   mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_buildFSETable_body_default.constprop.0':
 decompress.c:(.text.ZSTD_buildFSETable_body_default.constprop.0+0x2a8): undefined reference to `__clzdi2'
   mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_readNCount_body_default':
 decompress.c:(.text.FSE_readNCount_body_default+0x130): undefined reference to `__ctzdi2'
 mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x1a4): undefined reference to `__ctzdi2'
 mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x2e4): undefined reference to `__clzdi2'
   mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `HUF_readStats_body_default':
 decompress.c:(.text.HUF_readStats_body_default+0x184): undefined reference to `__clzdi2'
 mips64el-linux-ld: decompress.c:(.text.HUF_readStats_body_default+0x1b4): undefined reference to `__clzdi2'
   mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_DCtx_getParameter':
 decompress.c:(.text.ZSTD_DCtx_getParameter+0x60): undefined reference to `__clzdi2'

Fixes: a510b616131f ("MIPS: Add support for ZSTD-compressed kernels")
Reported-by: kernel test robot 
Reported-by: Nick Terrell 
Signed-off-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer

MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS

2022-01-02T13:17:30+00:00

If this option is not 0x0, it will be used for zboot load address.
Otherwise, the result of calc_vmlinuz_load_addr will be used.

The zload-y value for generic are also removed then, as the current
value breaks booting on qemu -M boston.
The result of calc_vmlinuz_load_addr works well for most of cases.

The default value of bcm47xx keeps as it currently.

Signed-off-by: YunQiang Su 
Signed-off-by: Thomas Bogendoerfer

MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000

2022-01-02T13:13:19+00:00

The module is now supported, enable it.

Signed-off-by: Qing Zhang 
Signed-off-by: Thomas Bogendoerfer

MIPS: DTS: Ingenic: adjust register size to available registers

2021-12-09T17:10:00+00:00

After getting the regmap size from the device tree we should
reduce the ranges to the really available registers. This
allows to read only existing registers from the debug fs
and makes the regmap check out-of-bounds access.

For the jz4780 we have done this already.

Suggested-for: Paul Cercueil 
Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Thomas Bogendoerfer

MIPS: DTS: CI20: Add DT nodes for HDMI setup

2021-12-09T17:09:18+00:00

We need to hook up
* HDMI connector
* HDMI power regulator
* JZ4780_CLK_HDMI @ 27 MHz
* DDC pinmux
* HDMI and LCDC endpoint connections

Signed-off-by: Paul Boddie 
Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Thomas Bogendoerfer

MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers

2021-12-09T17:09:04+00:00

A specialisation of the generic Synopsys HDMI driver is employed for
JZ4780 HDMI support. This requires a new driver, plus device tree and
configuration modifications.

Here we add jz4780 device tree setup.

Signed-off-by: Paul Boddie 
Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Thomas Bogendoerfer