linux.git/arch/mips/boot/compressed, branch v3.14

mips: delete non-required instances of include

2014-01-24T21:39:56+00:00

None of these files are actually using any __init type directives
and hence don't need to include .  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6320/

MIPS: ZBOOT: gather string functions into string.c

2014-01-24T21:39:55+00:00

In the worst case this adds less then 128 bytes of code
but on the other hand this makes code organization more clear.

Signed-off-by: Antony Pavlov 
Reviewed-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle 
Cc: John Crispin 
Cc: Florian Fainelli 
Acked-by: Florian Fainelli 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/6344/

MIPS: JZ4740: reuse UART0 address macro for vmlinuz debug port

2014-01-23T12:02:34+00:00

Signed-off-by: Antony Pavlov 
Acked-by: Lars-Peter Clausen 
Signed-off-by: John Crispin 
Patchwork: http://patchwork.linux-mips.org/patch/5927/

MIPS: ZBOOT: Support LZ4 compression scheme

2013-10-29T20:24:34+00:00

Add support for the LZ4 compression scheme in the ZBOOT decompression
stub, in order to support it we need to:

- select the "lz4" compression tool to compress the vmlinux.bin
  payload
- memcpy() is also required for decompress_unlz4.c so we share the
  implementation between GZIP, XZ and now LZ4

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: james.hogan@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/5829/
Signed-off-by: Ralf Baechle

MIPS: ZBOOT: Define program header for text loadable segment

2013-10-29T20:24:30+00:00

There is currently no corresponding ELF program header for the "text"
loadable segment which is confusing for some bootloader out there such
as CFE because it expects to find a program header matching the segment
it is trying to load. The Linux kernel ELF binary "vmlinux" has a
similar program header for the text segment so we just mimic this here
too.

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: james.hogan@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/5827/
Signed-off-by: Ralf Baechle

MIPS: ZBOOT: Support XZ compression scheme

2013-10-29T20:24:28+00:00

Add support for the XZ compression scheme in the ZBOOT decompression
stub, in order to support it we need to:

- select the "xzkern" compression tool to compress the vmlinux.bin
  payload
- link with ashldi3.o for xz_dec_run() to work
- memcpy() is also required for decompress_unxz.c so we share the
  implementation between GZIP and XZ

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: james.hogan@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/5818/
Signed-off-by: Ralf Baechle

MIPS: Refactor load/entry address calculations

2013-09-03T15:58:37+00:00

The vmlinux load address and entry address is calculated in multiple
places:
 - arch/mips/Makefile defines load-y from CONFIG_PHYSICAL_START (or
   defined by the platform) and passes it to
   arch/mips/boot/compressed/Makefile.
 - arch/mips/boot/compressed/Makefile calculates kernel entry using nm.
 - arch/mips/lasat/image/Makefile calculates both load and entry address
   using nm.

Lets combine these in the main Makefile and then pass them as Make
parameters to each of the three boot image Makefiles (in boot/,
boot/compressed, lasat/image/). The boot/ Makefile doesn't currently use
them, but will soon need to for U-Boot image targets.

The existing load-y definition is used in preference to calculating the
load address using nm.

Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5794/
Signed-off-by: Ralf Baechle

MIPS: Boot: Compressed: Remove -fstack-protector from CFLAGS

2013-07-01T13:10:41+00:00

When building with -fstack-protector, gcc emits the __stack_chk_guard and
__stack_chk_fail symbols to check for stack stability. These symbols are
defined in vmlinux but the generated vmlinux.bin that is used to create
the compressed vmlinuz image has no symbol table so the linker can't find
these symbols during the final linking phase.  As a result of which, we
need either to redefine these symbols just for the compressed image or drop
the -fstack-protector option when building the compressed image. This patch
implements the latter of two options.

Fixes the following linking problem:

dbg.c:(.text+0x7c): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0x80): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xd4): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xec): undefined reference to `__stack_chk_fail'

[ralf@linux-mips.org: I'm applying this before the patch that actually adds
stack protector support for MIPS.  This means, it will not be possible
to trigger above error message with any commit from the tree but rather
they are what one would hit without this commit.]

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras 
Patchwork: https://patchwork.linux-mips.org/patch/5575/
Signed-off-by: Ralf Baechle

MIPS: Netlogic: Support compressed kernel

2013-06-13T15:46:41+00:00

Add SYS_SUPPORTS_ZBOOT and SYS_SUPPORTS_ZBOOT_UART16550 config options
for XLR and XLP.

Update boot/compressed/uart-16550.c to add UART port for XLR and XLP.

Signed-off-by: Jayachandran C 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5417/
Signed-off-by: Ralf Baechle

MIPS: boot: Fixes for compressed/uart-16550.c

2013-06-13T15:46:41+00:00

Fix uart-16550.c for adding XLR/XLP support, changes are:
* Make register read/write use volatile pointers
* Support 32 bit IO read/write
* Increase timeout in waiting for UART LSR

Signed-off-by: Jayachandran C 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5416/
Signed-off-by: Ralf Baechle