linux.git/arch/mips/bcm63xx/setup.c, branch v3.12

MIPS: BCM63XX: add support for BCM3368 Cable Modem

2013-07-01T13:10:53+00:00

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:

- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash

The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle

MIPS: BCM63XX: add basic BCM6362 support

2013-05-07T23:19:03+00:00

Add basic support for detecting and booting the BCM6362.

Signed-off-by: Jonas Gorski 
Patchwork: http://patchwork.linux-mips.org/patch/5009/
Acked-by: John Crispin

MIPS: BCM63XX: fix revision ID width

2013-05-07T23:19:03+00:00

The REVID is only 8 bit wide.

Signed-off-by: Jonas Gorski 
Patchwork: http://patchwork.linux-mips.org/patch/5007/
Acked-by: John Crispin

Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"

2013-03-19T18:15:47+00:00

This commit causes a race between PCI scan and SSB fallback SPROM handler
registration, causing the wifi to not work on slower systems. The only
subsystem touched from board_register_devices is platform device
registration, which is safe as an arch init call.

This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36 [MIPS:
BCM63XX: Call board_register_device from device_initcall()].

Signed-off-by: Jonas Gorski 
To: linux-mips@linux-mips.org
Cc: John Crispin 
Cc: Maxime Bizon 
Cc: Florian Fainelli 
Cc: Kevin Cernekee 
Signed-off-by: Ralf Baechle

MIPS: BCM63XX: don't write to the chipid register on reboot

2012-08-24T18:09:00+00:00

While harmless, it is bad style to do so.

Signed-off-by: Maxime Bizon 
Signed-off-by: Jonas Gorski 
Patchwork: http://patchwork.linux-mips.org/patch/4092/
Signed-off-by: John Crispin

MIPS: BCM63XX: add external irq support for BCM6345

2012-08-24T18:09:00+00:00

Add the missing definitions for BCM6345.

Signed-off-by: Maxime Bizon 
Signed-off-by: Jonas Gorski 
Patchwork: http://patchwork.linux-mips.org/patch/4091/
Signed-off-by: John Crispin

MIPS: BCM63XX: Add basic BCM6328 support

2012-07-24T14:33:12+00:00

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.

Signed-off-by: Jonas Gorski 
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon 
Cc: Florian Fainelli 
Cc: Kevin Cernekee 
Patchwork: https://patchwork.linux-mips.org/patch/3951/
Reviewed-by: Florian Fainelli 
Signed-off-by: Ralf Baechle

mips: Fix typo in bcm63xx/setup.c

2012-02-05T16:14:47+00:00

Correct spelling "reseting" to "resetting" in
arch/mips/bcm63xx/setup.c

Signed-off-by: Masanari Iida 
Signed-off-by: Jiri Kosina

MIPS: BCM63XX: Add external irq support for non 6348 CPUs.

2011-12-07T22:03:04+00:00

Signed-off-by: Maxime Bizon 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2899/
Signed-off-by: Ralf Baechle

MIPS: BCM63XX: Call board_register_device from device_initcall()

2011-12-07T22:03:02+00:00

Some device registration (eg leds), expect subsystem initcall to be
run first, so move board device registration to device_initcall().

Signed-off-by: Maxime Bizon 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2891/
Signed-off-by: Ralf Baechle