linux.git/arch/mips/ar7/clock.c, branch master

MIPS: AR7: remove platform

2023-10-19T08:39:46+00:00

After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].

[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7

Suggested-by: Jonas Gorski 
Signed-off-by: Wolfram Sang 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer

mips: ar7: convert to CONFIG_COMMON_CLK

2021-06-08T15:00:09+00:00

Perform a minimal conversion of the ar7 clock implementation to the common
clock framework. While the hardware can control the rates, this is left
unchanged, and all clocks are registered as fixed-rate or fixed-divider
clocks. Similarly, the clkdev lookup information is left unchanged but
moved from the table format into individual allocations.

There is a small increase in code size:

   text	   data	    bss	    dec	    hex	filename
4757116	 596640	  91328	5445084	 5315dc	vmlinux-before
4806159	 602360	  91344	5499863	 53ebd7	vmlinux-after

Signed-off-by: Arnd Bergmann

mips: ar7: convert to clkdev_lookup

2021-06-08T15:00:08+00:00

ar7 is one of only two platforms that provide the clock interface but
implement a custom version of the clkdev_lookup code.

Change this to use the generic version instead.

Signed-off-by: Arnd Bergmann

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig 
Acked-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin st fifth floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 50 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de
Signed-off-by: Greg Kroah-Hartman

MIPS: AR7: Normalize clk API

2018-06-28T21:28:59+00:00

Coldfire still provides its own variant of the clk API rather than using
the generic COMMON_CLK API.  This generally works, but it causes some
link errors with drivers using the clk_round_rate(), clk_set_rate(),
clk_set_parent(), or clk_get_parent() functions when a platform lacks
those interfaces.

This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.

The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.

Based on commit bd7fefe1f06ca6cc ("ARM: w90x900: normalize clk API").

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/19503/
Cc: Arnd Bergmann 
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

MIPS: AR7: allow NULL clock for clk_get_rate

2017-09-06T10:35:21+00:00

Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.

Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API")
Signed-off-by: Jonas Gorski 
Reported-by: Mathias Kresin 
Cc: Paul Gortmaker 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16775/
Signed-off-by: Ralf Baechle

MIPS: Audit and remove any unnecessary uses of module.h

2017-02-14T09:00:25+00:00

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker 
Cc: David Daney 
Cc: John Crispin 
Cc: Ralf Baechle 
Cc: "Steven J. Hill" 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan

MIPS: AR7: Fix trailing semicolon bug in clock.c

2011-07-20T22:12:12+00:00

Signed-off-by: Florian Fainelli 
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2489/
Signed-off-by: Ralf Baechle

MIPS: AR7: Fix loops per jiffies on TNETD7200 devices

2010-12-16T18:10:56+00:00

TNETD7200 run their CPU clock faster than the default CPU clock we assume.
In order to have the correct loops per jiffies settings, initialize clocks right
before setting mips_hpt_frequency. As a side effect, we can no longer use
msleep in clocks.c which requires other parts of the kernel to be initialized,
so replace these with mdelay.

Signed-off-by: Florian Fainelli 
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1749/
Signed-off-by: Ralf Baechle