linux.git/arch/microblaze/mm/init.c, branch v6.2

microblaze/mm: enable ARCH_HAS_VM_GET_PAGE_PROT

2022-07-18T00:14:38+00:00

This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports
standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT,
which looks up a private and static protection_map[] array.  Subsequently
all __SXXX and __PXXX macros can be dropped which are no longer needed.

Link: https://lkml.kernel.org/r/20220711070600.2378316-9-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual 
Cc: Michal Simek 
Cc: Arnd Bergmann 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: Christoph Hellwig 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Dinh Nguyen 
Cc: Geert Uytterhoeven 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Huacai Chen 
Cc: Ingo Molnar 
Cc: "James E.J. Bottomley" 
Cc: Jeff Dike 
Cc: Jonas Bonn 
Cc: Michael Ellerman 
Cc: Nicholas Piggin 
Cc: Palmer Dabbelt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Richard Henderson 
Cc: Rich Felker 
Cc: Russell King 
Cc: Sam Ravnborg 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Vasily Gorbik 
Cc: Vineet Gupta 
Cc: WANG Xuerui 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton

microblaze: Add support for reserved memory defined by DT

2022-04-21T08:54:57+00:00

In DT reserved memory nodes can be added as is described by
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
but Microblaze didn't have a support for it. The similar change was done
for ARC by commit 1b10cb21d888 ("ARC: add support for reserved memory
defined by device tree"). It is pretty much enough to call
early_init_fdt_scan_reserved_mem().
Microblaze is not using initial_boot_params that's why there is no need to
call early_init_fdt_reserve_self().

Signed-off-by: Michal Simek 
Link: https://lore.kernel.org/r/da4395776bf0de7207767abcc8a5df05bf411816.1645795048.git.michal.simek@xilinx.com

microblaze: Wire memblock_dump_all()

2022-04-21T08:54:57+00:00

Wire memblock_dump_all() to be able to see the whole memblock allocation.
Dumps are enabled by passing memblock=debug via kernel command line.

Signed-off-by: Michal Simek 
Link: https://lore.kernel.org/r/6f480b6010068872f429df69c8894cc3f1f38f46.1645795048.git.michal.simek@xilinx.com

microblaze: simplify pte_alloc_one_kernel()

2021-09-03T16:58:15+00:00

The microblaze's implementation of pte_alloc_one_kernel() used
memblock_alloc_try_nid_raw() along with clear_page() to allocated a zeroed
page during early setup.

Replace calls of these functions with a call to memblock_alloc_try_nid()
that already returns zeroed page and respects the same allocation limits
as memblock_alloc_try_nid_raw().

While on it drop early_get_page() wrapper that was only used in
pte_alloc_one_kernel().

Link: https://lkml.kernel.org/r/20210714123739.16493-3-rppt@kernel.org
Signed-off-by: Mike Rapoport 
Reviewed-by: David Hildenbrand 
Cc: Michal Simek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: move mem_init_print_info() into mm_init()

2021-04-30T18:20:42+00:00

mem_init_print_info() is called in mem_init() on each architecture, and
pass NULL argument, so using void argument and move it into mm_init().

Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Dave Hansen 	[x86]
Reviewed-by: Christophe Leroy 	[powerpc]
Acked-by: David Hildenbrand 
Tested-by: Anatoly Pugachev 	[sparc64]
Acked-by: Russell King 	[arm]
Acked-by: Mike Rapoport 
Cc: Catalin Marinas 
Cc: Richard Henderson 
Cc: Guo Ren 
Cc: Yoshinori Sato 
Cc: Huacai Chen 
Cc: Jonas Bonn 
Cc: Palmer Dabbelt 
Cc: Heiko Carstens 
Cc: "David S. Miller" 
Cc: "Peter Zijlstra" 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

microblaze: tag highmem_setup() with __meminit

2021-03-02T13:26:40+00:00

With commit a0cd7a7c4bc0 ("mm: simplify free_highmem_page() and
free_reserved_page()") the kernel test robot complains about a warning:

WARNING: modpost: vmlinux.o(.text.unlikely+0x23ac): Section mismatch in
  reference from the function highmem_setup() to the function
  .meminit.text:memblock_is_reserved()

This has been broken ever since microblaze added highmem support,
because memblock_is_reserved() was already tagged with "__init" back then -
most probably the function always got inlined, so we never stumbled over
it.

We need __meminit because __init_memblock defaults to that without
CONFIG_ARCH_KEEP_MEMBLOCK" and __init_memblock is not used outside memblock
code.

Reported-by: kernel test robot 
Fixes: 2f2f371f8907 ("microblaze: Highmem support")
Cc: Andrew Morton 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Andrew Morton 
Cc: Thomas Gleixner 
Cc: Arvind Sankar 
Cc: Ira Weiny 
Cc: Randy Dunlap 
Cc: Oscar Salvador 
Cc: Anshuman Khandual 
Signed-off-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Link: https://lore.kernel.org/r/20210301114749.47914-1-david@redhat.com
Signed-off-by: Michal Simek

Merge tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze

2020-12-16T20:04:39+00:00

Pull microblaze updates from Michal Simek:
 "The biggest change is to remove support for noMMU configuration.

  FPGAs are bigger so people use Microblaze with MMU for a lot of years
  and there is likely no user of this code anymore. No one is updating
  libraries for this configuration either.

   - Remove noMMU support

   - Add support for TIF_NOTIFY_SIGNAL

   - Small header fix"

* tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove noMMU code
  microblaze: add support for TIF_NOTIFY_SIGNAL
  microblaze: Replace  by

microblaze: Remove noMMU code

2020-11-26T15:39:35+00:00

This configuration is obsolete and likely none is really using it. That's
why remove it to simplify code.

Note about CONFIG_MMU in hw_exception_handler.S is left intentionally
for better comment understanding.

Cc: Mike Rapoport 
Cc: Arnd Bergmann 
Signed-off-by: Michal Simek 
Acked-by: Mike Rapoport 
Acked-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/43486cab370e0c0a79860120b71e0caac75a7e44.1606397528.git.michal.simek@xilinx.com

microblaze/mm/highmem: Add dropped #ifdef back

2020-11-19T19:49:44+00:00

The conversion to generic kmap atomic broke microblaze by removing the
build fail.

Add it back.

Fixes: 7ac1b26b0a72 ("microblaze/mm/highmem: Switch to generic kmap atomic")
Reported-by: Randy Dunlap 
Signed-off-by: Thomas Gleixner 
Cc: Michal Simek

microblaze/mm/highmem: Switch to generic kmap atomic

2020-11-06T22:14:56+00:00

No reason having the same code in every architecture.

Signed-off-by: Thomas Gleixner 
Cc: Michal Simek 
Cc: Arnd Bergmann 
Link: https://lore.kernel.org/r/20201103095857.777445435@linutronix.de