linux.git/arch/microblaze/kernel, branch v4.13-rc2 Linux kernel source tree Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2017-07-03T23:14:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-07-03T23:14:51+00:00 1b044f1cfc65a7d90b209dfabd57e16d98b58c5b Pull timer updates from Thomas Gleixner: "A rather large update for timers/timekeeping: - compat syscall consolidation (Al Viro) - Posix timer consolidation (Christoph Helwig / Thomas Gleixner) - Cleanup of the device tree based initialization for clockevents and clocksources (Daniel Lezcano) - Consolidation of the FTTMR010 clocksource/event driver (Linus Walleij) - The usual set of small fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits) timers: Make the cpu base lock raw clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()' clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap clocksource/drivers/tcb_clksrc: Make IO endian agnostic clocksource/drivers/sun4i: Switch to the timer-of common init clocksource/drivers/timer-of: Fix invalid iomap check Revert "ktime: Simplify ktime_compare implementation" clocksource/drivers: Fix uninitialized variable use in timer_of_init kselftests: timers: Add test for frequency step kselftests: timers: Fix inconsistency-check to not ignore first timestamp time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Clean up CLOCK_MONOTONIC_RAW time handling posix-cpu-timers: Make timespec to nsec conversion safe itimer: Make timeval to nsec conversion range limited timers: Fix parameter description of try_to_del_timer_sync() ktime: Simplify ktime_compare implementation clocksource/drivers/fttmr010: Factor out clock read code clocksource/drivers/fttmr010: Implement delay timer clocksource/drivers: Add timer-of common init routine clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume ... 
Pull timer updates from Thomas Gleixner:
 "A rather large update for timers/timekeeping:

   - compat syscall consolidation (Al Viro)

   - Posix timer consolidation (Christoph Helwig / Thomas Gleixner)

   - Cleanup of the device tree based initialization for clockevents and
     clocksources (Daniel Lezcano)

   - Consolidation of the FTTMR010 clocksource/event driver (Linus
     Walleij)

   - The usual set of small fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
  timers: Make the cpu base lock raw
  clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
  clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
  clocksource/drivers/tcb_clksrc: Make IO endian agnostic
  clocksource/drivers/sun4i: Switch to the timer-of common init
  clocksource/drivers/timer-of: Fix invalid iomap check
  Revert "ktime: Simplify ktime_compare implementation"
  clocksource/drivers: Fix uninitialized variable use in timer_of_init
  kselftests: timers: Add test for frequency step
  kselftests: timers: Fix inconsistency-check to not ignore first timestamp
  time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
  time: Clean up CLOCK_MONOTONIC_RAW time handling
  posix-cpu-timers: Make timespec to nsec conversion safe
  itimer: Make timeval to nsec conversion range limited
  timers: Fix parameter description of try_to_del_timer_sync()
  ktime: Simplify ktime_compare implementation
  clocksource/drivers/fttmr010: Factor out clock read code
  clocksource/drivers/fttmr010: Implement delay timer
  clocksource/drivers: Add timer-of common init routine
  clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
  ...
Merge tag 'microblaze-4.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze 2017-07-03T22:17:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-07-03T22:17:19+00:00 058e88d37f872a9bc9fac7e49fdad43cdc9ba25d Pull microblaze updates from Michal Simek: - timer fix - use simplified macro in dma.c - wire-up new syscall - remove asp-generic wrappers - fix MMU table handling - defconfig updates - low-level entry.S changes * tag 'microblaze-4.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix MSR flags when returning from exception microblaze: Separate GP registers from MSR handling microblaze: Enabling CONFIG_BRIDGE in mmu_defconfig microblaze: Enabling CONFIGS related to MTD microblaze: Update defconfigs microblaze: mm: Flush TLB to ensure correct mapping when higmem ON microblaze: remove asm-generic wrapper headers microblaze: wire up statx syscall microblaze: Set ->min_delta_ticks and ->max_delta_ticks for timer microblaze: use sg_phys() 
Pull microblaze updates from Michal Simek:

 - timer fix

 - use simplified macro in dma.c

 - wire-up new syscall

 - remove asp-generic wrappers

 - fix MMU table handling

 - defconfig updates

 - low-level entry.S changes

* tag 'microblaze-4.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix MSR flags when returning from exception
  microblaze: Separate GP registers from MSR handling
  microblaze: Enabling CONFIG_BRIDGE in mmu_defconfig
  microblaze: Enabling CONFIGS related to MTD
  microblaze: Update defconfigs
  microblaze: mm: Flush TLB to ensure correct mapping when higmem ON
  microblaze: remove asm-generic wrapper headers
  microblaze: wire up statx syscall
  microblaze: Set ->min_delta_ticks and ->max_delta_ticks for timer
  microblaze: use sg_phys()
arch: remove unused macro/function thread_saved_pc() 2017-06-28T23:13:57+00:00 Tobias Klauser tklauser@distanz.ch 2017-06-28T13:30:02+00:00 6474924e2b5ddb0030c355558966adcbe3b49022 The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()").  Remove the implementations as well.

Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
microblaze: Fix MSR flags when returning from exception 2017-06-22T13:37:00+00:00 Michal Simek michal.simek@xilinx.com 2016-02-24T10:30:04+00:00 14ef905bb2eecb02f7ce31b8fbedd4a75ddf0f57 The issue was that the service routine was sometimes returning with the wrong flags set in the MSR. In this case, EIP bit was set while returning to User Mode which is an illegal combination since exceptions are always handled in privileged mode. In order for MicroBlaze to take an interrupt, the MSR must have IE=1, BIP=0 and EIP=0. Signed-off-by: Stefan Asserhall <stefana@xilinx.com> Signed-off-by: Goran Bilski <goran@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
The issue was that the service routine was sometimes
returning with the wrong flags set in the MSR.

In this case, EIP bit was set while returning to User Mode
which is an illegal combination since exceptions are always
handled in privileged mode.

In order for MicroBlaze to take an interrupt, the MSR must have IE=1,
BIP=0 and EIP=0.

Signed-off-by: Stefan Asserhall <stefana@xilinx.com>
Signed-off-by: Goran Bilski <goran@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze: Separate GP registers from MSR handling 2017-06-22T13:36:59+00:00 Michal Simek michal.simek@xilinx.com 2016-02-24T10:31:14+00:00 faf154cd49ba99b24f45a65b18b0deca0bfed8ee Separate general purpose register restoring from MSR handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Separate general purpose register restoring from MSR handling.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
clocksource/drivers: Rename clocksource_probe to timer_probe 2017-06-14T09:59:16+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2017-05-26T15:40:46+00:00 ba5d08c0ea785d5710c5a1e7dc3182b7124d63c0 The function name is now renamed to 'timer_probe' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> 
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE 2017-06-14T09:58:45+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2017-05-26T14:56:11+00:00 1727339590fdb5a1ded881b540cd32121278d414 The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> 
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
microblaze: wire up statx syscall 2017-05-29T09:03:56+00:00 Tobias Klauser tklauser@distanz.ch 2017-05-19T11:43:29+00:00 f5ef419630e85e80284cd0256cb5a13a66bbd6c5 Add the new statx syscall. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Add the new statx syscall.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze: Set ->min_delta_ticks and ->max_delta_ticks for timer 2017-05-29T09:02:43+00:00 Nicolai Stange nicstange@gmail.com 2017-03-30T19:45:28+00:00 bb26081a98d3db2fde37ff57f8276266b6158471 In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the microblaze arch's clockevent driver initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from this driver. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Make the microblaze arch's clockevent driver initialize these fields
properly.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze: use sg_phys() 2017-05-29T09:00:02+00:00 Geliang Tang geliangtang@gmail.com 2017-03-23T13:16:32+00:00 e56751c961eaf232f121025c29af94ab3d64feb2 Use sg_phys() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Use sg_phys() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>