Pull m68k updates from Geert Uytterhoeven:

 - a few time-related fixes:
     - off-by-one calendar month on some classes of machines
     - Y2038 preparation

 - build fix for ndelay() being called with a 64-bit type

 - revive 64-bit get_user(), which is used by some Android code

 - defconfig updates

 - fix for a long-standing fatal bug in iounmap() on '020/030, which was
   actually fixed in 2.4.23, but never in 2.5.x and later

 - default DMA mask to avoid warning splats

 - minor fixes and cleanups

* tag 'm68k-for-v4.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Set default dma mask for platform devices
  m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
  m68k/defconfig: Update defconfigs for v4.17-rc3
  m68k/uaccess: Revive 64-bit get_user()
  m68k: Implement ndelay() as an inline function to force type checking/casting
  zorro: Add a blank line after declarations
  m68k: Use read_persistent_clock64() consistently
  m68k: Fix off-by-one calendar month
  m68k: Fix style, spelling, and grammar in siginfo_build_tests()
  m68k/mac: Fix SWIM memory resource end address

Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...

This avoids a WARNING splat when loading the macsonic or macmace driver.
Please see commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask").

This implementation of arch_setup_pdev_archdata() differs from the
powerpc one, in that this one avoids clobbering a device dma mask
which has already been initialized.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

We have two ways of getting the current time from a platform at boot
or during suspend: either using read_persistent_clock() or the rtc
class operation. We never need both, so I'm hiding the
read_persistent_clock variant when the generic RTC is enabled.

Since read_persistent_clock() and mktime() are deprecated because of
the y2038 overflow of time_t, we should use the time64_t based
replacements here.

Finally, the dependency on CONFIG_ARCH_USES_GETTIMEOFFSET looks
completely bogus in this case, so let's remove that. It was
added in commit b13b3f51ff7b ("m68k: fix inclusion of
arch_gettimeoffset for non-MMU 68k classic CPU types") to deal
with arch_gettimeoffset(), which has since been removed from
this file and is unrelated to the RTC functions.

The rtc accessors are only used by classic machines, while
coldfire uses proper RTC drivers, so we can put the old
ifdef back around both functions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

This fixes a bug in read_persistent_clock() which causes the system
clock to lag the Real Time Clock by one month. The problem was noticed
on a Mac, but theoretically it must also affect Atari, BVME6000 and Q40.

The tm_mon value in the struct rtc_time passed to mach_hwclk() is
zero-based, and atari_mste_hwclk(), atari_tt_hwclk(), bvme6000_hwclk(),
mac_hwclk() and q40_hwclk() all make this adjustment. Unfortunately,
dn_dummy_hwclk(), mvme147_hwclk(), mvme16x_hwclk(), sun3_hwclk() and
sun3x_hwclk() fail to decrement tm_mon.  Also m68328_hwclk() assumes
a one-based tm_mon.

Bring these platforms into line and fix read_persistent_clock() so it
works correctly on all m68k platforms.

The datasheets for the RTC devices found on the affected platforms
all confirm that the year is stored as a value in the range 0-99 and
the month is stored as a value in the range 1-12. Please refer to the
datasheets for MC146818 (Apollo), DS1643 (MVME), ICM7170 (Sun 3)
and M48T02 (Sun 3x).

Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Fixes: 4be33329d46f80e8 ("m68k: Verify the offsets in struct siginfo never change.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull siginfo updates from Eric Biederman:
 "The work on cleaning up and getting the bugs out of siginfo generation
  was largely stalled this round. The progress that was made was the
  definition of FPE_FLTUNK. Which is usable to fix many of the cases
  where siginfo generation is erroneously generating SI_USER by setting
  si_code to 0, that has recently been tagged as FPE_FIXME.

  You already have the change by way of the arm64 tree as that
  definition was pulled into the arm64 tree to allow fixing the problem
  there.

  What remains is the second round of fixing for what I thought was a
  trivial change to the struct siginfo when put the union in _sigfault
  where it belongs. Do to historical reasons 32bit m68k only ensures
  that pointers are 2 byte aligned. So I have added a m68k test case
  made of BUILD_BUG_ONs to verify I have this fix correct and possibly
  catch problems, and I have computed the number of bytes of padding
  needed for the _addr_bnd and _addr_pkey cases and just use an array of
  characters that size.

  For pure paranoia I have written the code so if there is an
  architecture out there that does not perform any alignment of
  structures it should still work.

  With the removal of all of the stale arechitectures this cycle future
  work on cleaning up struct siginfo should be much easier. Almost all
  of the conflicting si_code definitions have been removed with the
  removal of (blackfin, tile, and frv). Plus some of the most difficult
  to test cases have simply been removed from the tree.

  Which means that with a little luck copy_siginfo_to_user can become a
  light weight wrapper around copy_to_user in the next cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  m68k: Verify the offsets in struct siginfo never change.
  signal: Correct the offset of si_pkey and si_lower in struct siginfo on m68k