linux.git/arch/m68k/kernel/setup_no.c, branch v6.16

m68k: Replace memcpy() + manual NUL-termination with strscpy()

2025-05-18T22:54:30+00:00

Use strscpy() to safely copy the command-line string instead of memcpy()
followed by a manual NUL-termination.

The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().

No functional changes intended.

Signed-off-by: Thorsten Blum 
Signed-off-by: Greg Ungerer

m68k: Do not include

2025-03-16T23:27:59+00:00

The m68k architecture's source files do not require .
Remove the include statements.

Signed-off-by: Thomas Zimmermann 
Signed-off-by: Greg Ungerer

m68k: remove trailing space after \n newline

2024-09-08T22:33:35+00:00

There is a extraneous space after a newline in a pr_debug message.
Remove it.

Signed-off-by: Colin Ian King 
Signed-off-by: Greg Ungerer

m68k: use strscpy() to instead of strncpy()

2022-12-04T23:07:21+00:00

The implementation of strscpy() is more robust and safer.

Signed-off-by: Xu Panda 
Signed-off-by: Yang Yang 
Signed-off-by: Greg Ungerer

Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-30T18:37:26+00:00

Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...

m68knommu: fix undefined reference to `mach_get_rtc_pll'

2022-05-24T14:03:58+00:00

Configuring for a nommu classic m68k target and enabling the generic rtc
driver (CONFIG_RTC_DRV_GENERIC) will result in the following compile
error:

   m68k-linux-ld: arch/m68k/kernel/time.o: in function `rtc_ioctl':
   time.c:(.text+0x82): undefined reference to `mach_get_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xbc): undefined reference to `mach_set_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xf4): undefined reference to `mach_set_rtc_pll'

There are no definitions of "mach_set_rtc_pll" and "mach_get_rtc_pll" in the
nommu code paths. Move these definitions and the associated "mach_hwclk",
so that they are around their use case in time.c. This means they will
always be defined on the builds that require them, and not on those that
cannot use them - such as ColdFire (both with and without MMU enabled).

Reported-by: kernel test robot 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Geert Uytterhoeven 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Greg Ungerer

m68k: Switch to new sys-off handler API

2022-05-19T17:30:30+00:00

Kernel now supports chained power-off handlers. Use
register_power_off_handler() that registers power-off handlers and
do_kernel_power_off() that invokes chained power-off handlers. Legacy
pm_power_off() will be removed once all drivers will be converted to
the new sys-off API.

Normally arch code should adopt only the do_kernel_power_off() at first,
but m68k is a special case because it uses pm_power_off() "inside out",
i.e. pm_power_off() invokes machine_power_off() [in fact it does nothing],
while it's machine_power_off() that should invoke the pm_power_off(), and
thus, we can't convert platforms to the new API separately. There are only
two platforms changed here, so it's not a big deal.

Acked-by: Geert Uytterhoeven 
Reviewed-by: Michał Mirosław 
Signed-off-by: Dmitry Osipenko 
Signed-off-by: Rafael J. Wysocki

m68k: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Greg Ungerer 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

2020-12-21T18:35:11+00:00

Pull m68knommu updates from Greg Ungerer:

 - cleanup of 68328 code

 - align BSS section to 32bit

* tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: m68328: remove duplicate code
  m68k: m68328: move platform code to separate files
  m68knommu: align BSS section to 4-byte boundaries

m68k: m68328: remove duplicate code

2020-12-06T23:37:58+00:00

Building a kernel with multiple dragonball based boards
enabled needlessly causes a link failure because of duplicate
config_BSP() functions between the CPU versions.

Avoid that merging the three almost identical files into one,
and hiding the CPU configuration behind the board config.
The pr_info() lines are consolidated in one place.

It is still not possible to run a kernel configured for
more than one board, but at least configurations that can
be selected can also be built now.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Ungerer