linux.git/arch/m68k/kernel/setup_no.c, branch v5.19

Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-30T18:37:26+00:00

Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...

m68knommu: fix undefined reference to `mach_get_rtc_pll'

2022-05-24T14:03:58+00:00

Configuring for a nommu classic m68k target and enabling the generic rtc
driver (CONFIG_RTC_DRV_GENERIC) will result in the following compile
error:

   m68k-linux-ld: arch/m68k/kernel/time.o: in function `rtc_ioctl':
   time.c:(.text+0x82): undefined reference to `mach_get_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xbc): undefined reference to `mach_set_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xf4): undefined reference to `mach_set_rtc_pll'

There are no definitions of "mach_set_rtc_pll" and "mach_get_rtc_pll" in the
nommu code paths. Move these definitions and the associated "mach_hwclk",
so that they are around their use case in time.c. This means they will
always be defined on the builds that require them, and not on those that
cannot use them - such as ColdFire (both with and without MMU enabled).

Reported-by: kernel test robot 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Geert Uytterhoeven 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Greg Ungerer

m68k: Switch to new sys-off handler API

2022-05-19T17:30:30+00:00

Kernel now supports chained power-off handlers. Use
register_power_off_handler() that registers power-off handlers and
do_kernel_power_off() that invokes chained power-off handlers. Legacy
pm_power_off() will be removed once all drivers will be converted to
the new sys-off API.

Normally arch code should adopt only the do_kernel_power_off() at first,
but m68k is a special case because it uses pm_power_off() "inside out",
i.e. pm_power_off() invokes machine_power_off() [in fact it does nothing],
while it's machine_power_off() that should invoke the pm_power_off(), and
thus, we can't convert platforms to the new API separately. There are only
two platforms changed here, so it's not a big deal.

Acked-by: Geert Uytterhoeven 
Reviewed-by: Michał Mirosław 
Signed-off-by: Dmitry Osipenko 
Signed-off-by: Rafael J. Wysocki

m68k: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Greg Ungerer 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

2020-12-21T18:35:11+00:00

Pull m68knommu updates from Greg Ungerer:

 - cleanup of 68328 code

 - align BSS section to 32bit

* tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: m68328: remove duplicate code
  m68k: m68328: move platform code to separate files
  m68knommu: align BSS section to 4-byte boundaries

m68k: m68328: remove duplicate code

2020-12-06T23:37:58+00:00

Building a kernel with multiple dragonball based boards
enabled needlessly causes a link failure because of duplicate
config_BSP() functions between the CPU versions.

Avoid that merging the three almost identical files into one,
and hiding the CPU configuration behind the board config.
The pr_info() lines are consolidated in one place.

It is still not possible to run a kernel configured for
more than one board, but at least configurations that can
be selected can also be built now.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Ungerer

m68k: remove timer_interrupt() function

2020-10-30T20:57:06+00:00

This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.

Reviewed-by: Geert Uytterhoeven 
Acked-by: Geert Uytterhoeven 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Linus Walleij 
Signed-off-by: Arnd Bergmann

m68k: nommu: register start of the memory with memblock

2020-06-29T13:57:54+00:00

The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:

BUG: Bad page state in process swapper  pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
        404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
        00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
        00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
        00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
        400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
        41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
        [<40088470>] 0x40088470
 [<40088504>] 0x40088504
 [<40088a12>] 0x40088a12
 [<402ca000>] 0x402ca000
 [<400a0934>] 0x400a0934

Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.

Signed-off-by: Mike Rapoport 
Signed-off-by: Greg Ungerer

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

arch/m68k/setup: Drop dummy_con initialization

2020-01-14T14:29:16+00:00

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar 
Link: https://lore.kernel.org/r/20191218214506.49252-11-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman