When building with W=1:
arch/m68k/mm/motorola.c:414:13: warning: no previous prototype for ‘paging_init’ [-Wmissing-prototypes]
414 | void __init paging_init(void)
| ^~~~~~~~~~~
arch/m68k/mm/sun3mmu.c:36:13: warning: no previous prototype for ‘paging_init’ [-Wmissing-prototypes]
36 | void __init paging_init(void)
| ^~~~~~~~~~~
Fix this by consolidating the multiple prototypes into the common
<asm/pgtable.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/1b03fde54f205e972e19959b8e335022205d538c.1694613528.git.geert@linux-m68k.org
check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230613224545.254342916@linutronix.de
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead.
Fixes: 376e3fdecb0dcae2 ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
This is useful on !virt platforms for kexec, so change things from
BI_VIRT_RNG_SEED to be BI_RNG_SEED, and simply remove BI_VIRT_RNG_SEED
because it only ever lasted one release, and nothing is broken by not
having it. At the same time, keep a comment noting that it's been
removed, so that ID isn't reused. In addition, we previously documented
2-byte alignment, but 4-byte alignment is actually necessary, so update
that comment.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: a1ee38ab1a75 ("m68k: virt: Use RNG seed from bootinfo block")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220927130835.1629806-2-Jason@zx2c4.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The RNG seed boot record is memzeroed after processing, in order to
preserve forward secrecy. By saving the bootinfo for procfs prior to
that, forward secrecy is violated, since it becomes possible to recover
past states. So, save the bootinfo block only after first processing
them.
Fixes: a1ee38ab1a75 ("m68k: virt: Use RNG seed from bootinfo block")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220927130835.1629806-1-Jason@zx2c4.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818205941.6240-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
Pull m68knommu updates from Greg Ungerer: "A collection of changes to add elf-fdpic loader support for m68k. Also a collection of various fixes. They include typo corrections, undefined symbol compilation fixes, removal of the ISA_DMA_API support and removal of unused code. Summary: - correctly set up ZERO_PAGE pointer - drop ISA_DMA_API support - fix comment typos - fixes for undefined symbols - remove unused code and variables - elf-fdpic loader support for m68k" * tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 68000 CPU link with no platform selected m68k: removed unused "mach_get_ss" m68knommu: fix undefined reference to `mach_get_rtc_pll' m68knommu: fix undefined reference to `_init_sp' m68knommu: allow elf_fdpic loader to be selected m68knommu: add definitions to support elf_fdpic program loader m68knommu: implement minimal regset support m68knommu: use asm-generic/mmu.h for nommu setups m68k: fix typos in comments m68k: coldfire: drop ISA_DMA_API support m68knommu: set ZERO_PAGE() to the allocated zeroed page
The m68k machine helper function "mach_get_ss" function pointer is set for some machines, but ultimately never used anywhere. Remove it. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>