<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/arch/m68k/include/asm, branch v5.15</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>m68k: Remove set_fs()</title>
<updated>2021-09-24T11:35:07+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2021-09-16T07:04:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9fde0348640252c79d462c4d29a09a14e8741f5c'/>
<id>9fde0348640252c79d462c4d29a09a14e8741f5c</id>
<content type='text'>
Add a m68k-only set_fc helper to set the SFC and DFC registers for the
few places that need to override it for special MM operations, but
disconnect that from the deprecated kernel-wide set_fs() API.

Note that the SFC/DFC registers are context switched, so there is no need
to disable preemption.

Partially based on an earlier patch from
Linus Torvalds &lt;torvalds@linux-foundation.org&gt;.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a m68k-only set_fc helper to set the SFC and DFC registers for the
few places that need to override it for special MM operations, but
disconnect that from the deprecated kernel-wide set_fs() API.

Note that the SFC/DFC registers are context switched, so there is no need
to disable preemption.

Partially based on an earlier patch from
Linus Torvalds &lt;torvalds@linux-foundation.org&gt;.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Provide __{get,put}_kernel_nofault</title>
<updated>2021-09-24T11:35:07+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2021-09-16T07:04:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8ade83390930d61c64fe3ab49081990c9d43d0d2'/>
<id>8ade83390930d61c64fe3ab49081990c9d43d0d2</id>
<content type='text'>
Allow non-faulting access to kernel addresses without overriding the
address space.  Implemented by passing the instruction name to the
low-level assembly macros as an argument, and force the use of the
normal move instructions for kernel access.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow non-faulting access to kernel addresses without overriding the
address space.  Implemented by passing the instruction name to the
low-level assembly macros as an argument, and force the use of the
normal move instructions for kernel access.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers</title>
<updated>2021-09-24T11:35:06+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2021-09-16T07:04:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=01eec1af5ec49b331948ace8f2287580e1594383'/>
<id>01eec1af5ec49b331948ace8f2287580e1594383</id>
<content type='text'>
Add new helpers for doing the grunt work of the 8-byte {get,put}_user
routines to allow for better reuse.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add new helpers for doing the grunt work of the 8-byte {get,put}_user
routines to allow for better reuse.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user</title>
<updated>2021-09-24T11:35:06+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2021-09-16T07:04:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=25d2cae4a5578695f667e868ada38b0b73eb1080'/>
<id>25d2cae4a5578695f667e868ada38b0b73eb1080</id>
<content type='text'>
Simplify the handling a bit by using the common helper instead of
referencing undefined symbols.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Simplify the handling a bit by using the common helper instead of
referencing undefined symbols.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES</title>
<updated>2021-09-24T11:35:06+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2021-09-16T07:04:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1dc4027bc8b524ed03c4db391cd7910eb4ee19d2'/>
<id>1dc4027bc8b524ed03c4db391cd7910eb4ee19d2</id>
<content type='text'>
Document that access_ok is completely broken for coldfire and friends at
the moment.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Document that access_ok is completely broken for coldfire and friends at
the moment.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Leave stack mangling to asm wrapper of sigreturn()</title>
<updated>2021-09-24T11:35:03+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2021-07-25T17:20:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0d20abde987bed05a8963c8aa4276019d54ff9e7'/>
<id>0d20abde987bed05a8963c8aa4276019d54ff9e7</id>
<content type='text'>
sigreturn has to deal with an unpleasant problem - exception stack frames
have different sizes, depending upon the exception (and processor model, as
well) and variable-sized part of exception frame may contain information
needed for instruction restart.  So when signal handler terminates and calls
sigreturn to resume the execution at the place where we'd been when we caught
the signal, it has to rearrange the frame at the bottom of kernel stack.
Worse, it might need to open a gap in the kernel stack, shifting pt_regs
towards lower addresses.

Doing that from C is insane - we'd need to shift stack frames (return addresses,
local variables, etc.) of C call chain, right under the nose of compiler and
hope it won't fall apart horribly.  What had been actually done is only slightly
less insane - an inline asm in mangle_kernel_stack() moved the stuff around,
then reset stack pointer and jumped to label in asm glue.

However, we can avoid all that mess if the asm wrapper we have to use anyway
would reserve some space on the stack between switch_stack and the C stack
frame of do_{rt_,}sigreturn().   Then C part can simply memmove() pt_regs +
switch_stack, memcpy() the variable part of exception frame into the opened
gap - all of that without inline asm, buggering C call chain, magical jumps
to asm labels, etc.

Asm wrapper would need to know where the moved switch_stack has ended up -
it might have been shifted into the gap we'd reserved before do_rt_sigreturn()
call.  That's where it needs to set the stack pointer to.  So let the C part
return just that and be done with that.

While we are at it, the call of berr_040cleanup() we need to do when
returning via 68040 bus error exception frame can be moved into C part
as well.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Finn Thain &lt;fthain@linux-m68k.org&gt;
Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
sigreturn has to deal with an unpleasant problem - exception stack frames
have different sizes, depending upon the exception (and processor model, as
well) and variable-sized part of exception frame may contain information
needed for instruction restart.  So when signal handler terminates and calls
sigreturn to resume the execution at the place where we'd been when we caught
the signal, it has to rearrange the frame at the bottom of kernel stack.
Worse, it might need to open a gap in the kernel stack, shifting pt_regs
towards lower addresses.

Doing that from C is insane - we'd need to shift stack frames (return addresses,
local variables, etc.) of C call chain, right under the nose of compiler and
hope it won't fall apart horribly.  What had been actually done is only slightly
less insane - an inline asm in mangle_kernel_stack() moved the stuff around,
then reset stack pointer and jumped to label in asm glue.

However, we can avoid all that mess if the asm wrapper we have to use anyway
would reserve some space on the stack between switch_stack and the C stack
frame of do_{rt_,}sigreturn().   Then C part can simply memmove() pt_regs +
switch_stack, memcpy() the variable part of exception frame into the opened
gap - all of that without inline asm, buggering C call chain, magical jumps
to asm labels, etc.

Asm wrapper would need to know where the moved switch_stack has ended up -
it might have been shifted into the gap we'd reserved before do_rt_sigreturn()
call.  That's where it needs to set the stack pointer to.  So let the C part
return just that and be done with that.

While we are at it, the call of berr_040cleanup() we need to do when
returning via 68040 bus error exception frame can be moved into C part
as well.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Reviewed-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Tested-by: Finn Thain &lt;fthain@linux-m68k.org&gt;
Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Double cast io functions to unsigned long</title>
<updated>2021-09-13T09:19:05+00:00</updated>
<author>
<name>Guenter Roeck</name>
<email>linux@roeck-us.net</email>
</author>
<published>2021-09-07T06:07:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b1a89856fbf63fffde6a4771d8f1ac21df549e50'/>
<id>b1a89856fbf63fffde6a4771d8f1ac21df549e50</id>
<content type='text'>
m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'm68knommu-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu</title>
<updated>2021-09-02T01:31:45+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-09-02T01:31:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6104dde096eba9f443845686a2c4b3fa31129eb4'/>
<id>6104dde096eba9f443845686a2c4b3fa31129eb4</id>
<content type='text'>
Pull m68knommu updates from Greg Ungerer:
 "A collection of fixes:

   -  flexcan platform support (for m5441x)

   -  fix CONFIG_ROMKERNEL linking

   -  fix compilation when CONFIG_ISA_DMA_API is set

   -  fix local ColdFire clk_enable() for NULL clk"

* tag 'm68knommu-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch
  m68k: coldfire: return success for clk_enable(NULL)
  m68k: m5441x: add flexcan support
  m68k: stmark2: update board setup
  m68k/nommu: prevent setting ROMKERNEL when ROM is not set
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull m68knommu updates from Greg Ungerer:
 "A collection of fixes:

   -  flexcan platform support (for m5441x)

   -  fix CONFIG_ROMKERNEL linking

   -  fix compilation when CONFIG_ISA_DMA_API is set

   -  fix local ColdFire clk_enable() for NULL clk"

* tag 'm68knommu-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch
  m68k: coldfire: return success for clk_enable(NULL)
  m68k: m5441x: add flexcan support
  m68k: stmark2: update board setup
  m68k/nommu: prevent setting ROMKERNEL when ROM is not set
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Fix asm register constraints for atomic ops</title>
<updated>2021-08-23T11:23:57+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2021-08-09T11:29:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=87d93029fe83e326d5b906e12e95600b157d2c0d'/>
<id>87d93029fe83e326d5b906e12e95600b157d2c0d</id>
<content type='text'>
Depending on register assignment by the compiler:

    {standard input}:3084: Error: operands mismatch -- statement `andl %a1,%d1' ignored
    {standard input}:3145: Error: operands mismatch -- statement `orl %a1,%d1' ignored
    {standard input}:3195: Error: operands mismatch -- statement `eorl %a1,%d1' ignored

Indeed, the first operand must not be an address register.  However, it
can be an immediate value.  Fix this by adjusting the register
constraint from "g" (general purpose register) to "di" (data register or
immediate).

Fixes: e39d88ea3ce4a471 ("locking/atomic, arch/m68k: Implement atomic_fetch_{add,sub,and,or,xor}()")
Fixes: d839bae4269aea46 ("locking,arch,m68k: Fold atomic_ops")
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Reported-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reported-by: Alexander Viro &lt;viro@zeniv.linux.org.uk&gt;
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Tested-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://lore.kernel.org/r/20210809112903.3898660-1-geert@linux-m68k.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Depending on register assignment by the compiler:

    {standard input}:3084: Error: operands mismatch -- statement `andl %a1,%d1' ignored
    {standard input}:3145: Error: operands mismatch -- statement `orl %a1,%d1' ignored
    {standard input}:3195: Error: operands mismatch -- statement `eorl %a1,%d1' ignored

Indeed, the first operand must not be an address register.  However, it
can be an immediate value.  Fix this by adjusting the register
constraint from "g" (general purpose register) to "di" (data register or
immediate).

Fixes: e39d88ea3ce4a471 ("locking/atomic, arch/m68k: Implement atomic_fetch_{add,sub,and,or,xor}()")
Fixes: d839bae4269aea46 ("locking,arch,m68k: Fold atomic_ops")
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Reported-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reported-by: Alexander Viro &lt;viro@zeniv.linux.org.uk&gt;
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Tested-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://lore.kernel.org/r/20210809112903.3898660-1-geert@linux-m68k.org
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: m5441x: add flexcan support</title>
<updated>2021-08-22T22:40:04+00:00</updated>
<author>
<name>Angelo Dureghello</name>
<email>angelo@kernel-space.org</email>
</author>
<published>2021-07-02T09:48:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=35a9f9363a89aa964c85b769c434a42b8b0f4b0d'/>
<id>35a9f9363a89aa964c85b769c434a42b8b0f4b0d</id>
<content type='text'>
Add flexcan support.

Signed-off-by: Angelo Dureghello &lt;angelo@kernel-space.org&gt;

Made the flexcan resource inclusion conditional based on the enablement
of the flexcan driver. This commit is no longer dependant on the
presence of the updated driver in mainline.

Signed-off-by: Greg Ungerer &lt;gerg@linux-m68k.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add flexcan support.

Signed-off-by: Angelo Dureghello &lt;angelo@kernel-space.org&gt;

Made the flexcan resource inclusion conditional based on the enablement
of the flexcan driver. This commit is no longer dependant on the
presence of the updated driver in mainline.

Signed-off-by: Greg Ungerer &lt;gerg@linux-m68k.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
